PureVisionHD 1080 DriveFreeSpace (6 Viewers)

catavolt

Design Group Manager
  • Team MediaPortal
  • August 13, 2007
    14,789
    11,608
    Königstein (Taunus)
    Home Country
    Germany Germany
    Here we go again :D
    I optimized skin and added a nice help text - be sure to read!
    As I said before you SHOULD activate drive C because of formatting of the skin.
    All other drives should be grouped automatically, not assigned drives show a respective message.
    Just copy the content of the attached ZIP into your PVHD folder (overwrite).
    Have fun!
     

    Attachments

    • DriveFreeSpace PureVisionHD 1080.zip
      79.6 KB

    framug

    Super Moderator
  • Team MediaPortal
  • January 31, 2005
    6,213
    2,348
    South of France
    Home Country
    France France
    • Thread starter
    • Moderator
    • #42
    Here we go again :D
    I optimized skin and added a nice help text - be sure to read!
    I read and do the same as displayed (text would be better than picture, for copy/paste) ;)

    As I said before you SHOULD activate drive C because of formatting of the skin.
    Yes, I read that but, I explain it and why in 3/ b)
    All other drives should be grouped automatically, not assigned drives show a respective message.
    Just copy the content of the attached ZIP into your PVHD folder (overwrite).
    Have fun!
    1/ The only C: checked :

    zz1.png

    2/ With E: checked, more than C: (please look at 2 times E: displayed)

    zz2.png

    3/ With your config :

    zz3.png

    a) rectangle can't contains all infos.
    b) Here is a problem : we already see that there is scroll for drives here BUT, you (and me) know that probably C: is not the drive where free space is critical.
    Then, before E: appears, others impatients users who will not wait scrolling could think OK, there are place in the disk, where it could not be the case...
     

    catavolt

    Design Group Manager
  • Team MediaPortal
  • August 13, 2007
    14,789
    11,608
    Königstein (Taunus)
    Home Country
    Germany Germany
    2/ With E: checked, more than C: (please look at 2 times E: displayed)
    Right - better I use the wording "This drive is not activated" ;)
    a) rectangle can't contains all infos.
    b) Here is a problem : we already see that there is scroll for drives here BUT, you (and me) know that probably C: is not the drive where free space is critical.
    Then, before E: appears, others impatients users who will not wait scrolling could think OK, there are place in the disk, where it could not be the case...
    a) unfortunately correct - have to think how adapt the size of that display ;)
    b) Scrolling starts per skin standard after 20 seconds - I´ll reduce that one for DFS to lets say 5 seconds
     

    framug

    Super Moderator
  • Team MediaPortal
  • January 31, 2005
    6,213
    2,348
    South of France
    Home Country
    France France
    • Thread starter
    • Moderator
    • #45
    a) unfortunately correct - have to think how adapt the size of that display ;)
    If a day, in "recorded" (wich is I think, more used than scheduled), would be great to adapt here too. ;)
    b) Scrolling starts per skin standard after 20 seconds - I´ll reduce that one for DFS to lets say 5 seconds
    Can be a solution or, completely avoid C: display.
    (My wife will never wait for 5 seconds). :D

    Also, if you have GFX ideas for DFS plugin enabled/disabled instead of default one, a bit like I made for FileExplorer, I'll take it

    Enabled :

    zz1.png

    Disabled :

    zz2.png
     

    High_Five

    Design Group
  • Team MediaPortal
  • February 10, 2023
    101
    876
    Home Country
    Germany Germany
    I used the configuration from my last post for a quick test with your latest settings_general.xml, where C:, D: and E: are fixed drives/partitions, F: and H: are USB sticks, G: is a virtual drive and I: is an optical drive.

    1. All drives are enabled, G: is probably the drive with 0% shown twice, H: is only shown as a red dot.

    Test mit allen LAufwerken aktiviert.png

    2. Drive D: is disabled, the last drive as a red dot is probably I:, the enabled optical drive.

    Test ohne D.png

    Regarding the layout, it might be easier to show in e.g. mytvrecordedtv.xml only the drives that are checked in the config of DriveFreeSpace and to present in Settings perhaps by means of menubutton all drives on several pages, where the physically not present drives are e.g. grayed out or marked differently.
     
    Last edited by a moderator:

    catavolt

    Design Group Manager
  • Team MediaPortal
  • August 13, 2007
    14,789
    11,608
    Königstein (Taunus)
    Home Country
    Germany Germany
    G: is a virtual drive and I: is an optical drive.
    Not sure whether DFS recognize those correctly ;) Therefore the glitches may appear ;)
    Sorry to edit your post but images in fullscreen consume to much space ...
     

    Users who are viewing this thread

    Similar threads

    Interesting. :coffee: I always have DVB subtitles enabled in "MP Config", but I actually switch on subtitles only for those films that have deafening sound effects and music, combined with inaudible dialogue. I have never noticed the problem that you have described, but I also use the EVR renderer, and not the Madvr renderer. So...
    Interesting. :coffee: I always have DVB subtitles enabled in "MP Config", but I actually switch on subtitles only for those films...
    Every so often, when I switch to a TV channel, my MP client stops accepting user inputs, either from the remote or keyboard/mouse...
    Replies
    27
    Views
    3K
    Now with Version 1.37 x64 MP is near to perfect with repect to speed, robustness and funtionality. There is just one point where I have an Idea for further improvement. As I am not too interested in advetisments, I am using comskip to mark times of ads, which is normally working, as it should but produces an error when trying to...
    Now with Version 1.37 x64 MP is near to perfect with repect to speed, robustness and funtionality. There is just one point where I...
    Now with Version 1.37 x64 MP is near to perfect with repect to speed, robustness and funtionality. There is just one point where I...
    Replies
    0
    Views
    712
    Hi CyberSimian (and others) just a bit along the coast from me (near Exeter) - I know you are very long-standing! Not going to make this long winded or anything, but just to point out over the @15 years I've overall donated several hundred quid. And I begrduge NONE of it, not a penny - I do wish MP well - 100%. It is an awesome...
    Hi CyberSimian (and others) just a bit along the coast from me (near Exeter) - I know you are very long-standing! Not going to...
    ONGGGG term MP user (and donator - why wouldn't you?) and leaving somewhat reluctantly. Few reasons, some that just seem...
    Replies
    4
    Views
    3K
    Update: Problem solved! The electronic program guides (tvguide.xml) have been successfully transferred to MediaPortal. The issue stemmed from the corruption of one or both of the mc2xml.dat and/or mc2xml.exe files, for an unknown reason. Consequently, even though the tvguide.xml file appeared to be updated, its content kept being an...
    Update: Problem solved! The electronic program guides (tvguide.xml) have been successfully transferred to MediaPortal. The issue...
    I was having a problem with the EPG on MP2 1.4.1 (although it used to run without any issues for a while). So I installed MP2 1.5...
    Replies
    8
    Views
    729
    I haven't tested it. I use MP1, but sometimes I try to help with MP2 :).
    I haven't tested it. I use MP1, but sometimes I try to help with MP2 :).
    This happened immediately after my Windows 11 x64 monthly update for November. The update included also cumulative update to .NET...
    Replies
    9
    Views
    1K
    Top Bottom