Make sure, the codecs you've chosen in MP config are in use. Check it with Graphedit, connect to remotegraph. Merits are often strange by default, I had to set them manually, afterwards MP was able to choose codecs properly.
Make sure, the codecs you've chosen in MP config are in use. Check it with Graphedit, connect to remotegraph. Merits are often...
TV-Server Version:
MediaPortal Version: 1.0 RC3
MediaPortal Skin: Blue3
Windows Version: XP sp3
CPU Type: AMD Athlon 5600+ 2,9GHz...
you can try:
Automatic Refreshrate Changer
you can try:
Automatic Refreshrate Changer
Hi all,
I have problems with playing back 24p HD content in a *.ts container.
But first, here is my approach...
I can use ffdshow in RC3 svn 20683. However, I had the problem that ffdshow (rev2054) didn't catch any changes in resolutions/aspect ratios for example when changing channels. It just kept using the information from the first tuned channel. So when that was ratio 4:3 then it stayed in 4:3 forever. I had to stretch to view 16:9...
I can use ffdshow in RC3 svn 20683. However, I had the problem that ffdshow (rev2054) didn't catch any changes in...
I am assuming MediaPortal still does not support the FFDSHow Video codec for decoding. I get a black screen (audio is fine) when...
Man, crazy i've been having the same problem. after reading this thread i checked another .rm file.. and it works.
better get those ' wrong ' rm files replaced :o
thanks for the hint !!!
Man, crazy i've been having the same problem. after reading this thread i checked another .rm file.. and it works.
better get...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0-SVN-13.09.2006-11:49:55,44-Build 10271
(2006-09-13)
MediaPortal...
Fixed the issue
Hello
This is an update to the issue I was having with playing ISO's, .IMG's and VOB's over the Local Area Network. At the first I thought it might be a Codec issue, loaded a few Codec's still could not play the files over the LAN. Then I moved to Daemon Tools as a solution, tried every possibility I could think of...
Fixed the issue
Hello
This is an update to the issue I was having with playing ISO's, .IMG's and VOB's over the Local Area...
Hello
I have an issue playing files that end in .IMG .ISO and .AVI.
This is what I have, I have one PC setup as an HTPC...
I have an .m2ts file ripped from a mpeg2 blu ray. It plays fine in MPC-HC. However, in Mediaportal choosing either MPV or ffdshow as the mpeg2 decoder results in smooth playback but a black and white picture. The setup handles VC-1 and H264 just fine. Is there an issue with mpeg2 hi-def play back with the popular decoders in MP?
I have an .m2ts file ripped from a mpeg2 blu ray. It plays fine in MPC-HC. However, in Mediaportal choosing either MPV or ffdshow...
I have an .m2ts file ripped from a mpeg2 blu ray. It plays fine in MPC-HC. However, in Mediaportal choosing either MPV or ffdshow...
hi,
i just placed the decoder i wanted in the window.
you can find the decoders on the left side under dshow filters.
then i connected the in and output pins.
if you rightclick on the block you can adjust settings of the selected filterblock.
it is not that difficult, very easy to use.
if you concentrate on it for ten...
hi,
i just placed the decoder i wanted in the window.
you can find the decoders on the left side under dshow filters.
then i...
hi everyone,
i have a very strange and annoying problem when i play a movie in MP.
when i play a movie (from hdd) in PDVD8 i...
Bei nVidia Karten kann man den Output-Level im Grafikkartenmenü einstellen. Ein Registryfix sollte nicht nötig sein.
Die wortgenau Einstellung müßte ich nachschauen (Sitz grad an nem iBook), aber bei mir läufts 1a so.
Bei nVidia Karten kann man den Output-Level im Grafikkartenmenü einstellen. Ein Registryfix sollte nicht nötig sein.
Die wortgenau...
Hi guys,
I have recently installed MP and had terrible problems concerning the brightness of movies. The problem had to do with...
Thanks for the fast reply both of you.But i dont want to install FFDShow, i will see if i can load 2 times the directvobsub.
Thanks for the fast reply both of you.But i dont want to install FFDShow, i will see if i can load 2 times the directvobsub.
Hi to all,
I want to do something and i dont know how,is it possible to load 2 different subtitles in a movie?OK now a lot of...
I used CCleaner to clean the registry
I used CCleaner to clean the registry
Hi guys,like armandp said i think is better to post all our codecs and filters related issues in a proper forum thread so My...
Yes it is strange that MP runs into a snag when it tries to play your original MP4 file. Since MP can playback MKV files, it sort of "disguises" your MP4 until it's ready to be decoded.
Yes it is strange that MP runs into a snag when it tries to play your original MP4 file. Since MP can playback MKV files, it sort...
I am getting a strange issue with one of my x264 encoded .mp4's. I use PDVD8 as the H264 filter both for MP and WMP, so the filter...
The only way of proving this is in windowed mode (alt-enter). and connect to remote graph using graphstudio or similar.
Codec merits do have a habit of overriding any MP config codecs, as much as we wish they would not.
The only way of proving this is in windowed mode (alt-enter). and connect to remote graph using graphstudio or similar.
Codec...
Btw: MediaPortal RC3
Ok i'm see to be getting a new problem emerge as soon as i fix another... :(
anywayz, right now i have the...
Found out that it was actually the files that were stuffed and out of sync, not my system. :s Oh well at least now I know it wasn't me!
Found out that it was actually the files that were stuffed and out of sync, not my system. :s Oh well at least now I know it...
I think I have a codec issue which I'm trying to resolve outside of MP. As I've mentioned before whenever I run HD films (720p...
FFDShow is not allowed as a mpeg2 codec, it caused too many problems.
If you search the internet, no one raves about ffdshows mpeg2 abilities, but it is good for postprocessing.
FFDShow is not allowed as a mpeg2 codec, it caused too many problems.
If you search the internet, no one raves about ffdshows...
I recentlly uninstalled ffdshow and installed the latest tryout (05/11/08). I configured my usual settings, then set ffdshow as my...
Hi MrOrsh,
i also have a similar problem.
see my thread about a "strange audio problem"
what i did and i recommend this to you as well is installing graphedit.
then you render one of your videofiles and see which codec is being used.
then if needed you can change the decoder by inserting a new graph, disconnecting the pins...
Hi MrOrsh,
i also have a similar problem.
see my thread about a "strange audio problem"
what i did and i recommend this to...
When I play a DVD in PowerDVD8 it looks great.
But when playing trough MediaPortal the colors look all gray and worn out.
I...
https://forum.team-mediaportal.com/offtopic-57/stand-alone-filters-mediaportal-44614/
Check out above for hardware acceleration codecs, purevideo codec is only mpeg2 dxva.
https://forum.team-mediaportal.com/offtopic-57/stand-alone-filters-mediaportal-44614/
Check out above for hardware acceleration...
TV-Server Version: 1.0 RC2
MediaPortal Version: 1.0 RC2
MediaPortal Skin: Blue wide
Windows Version: Windows XP SP3
CPU Type: AMD...
Use frame rate doubler
Just yesterday I realized what fixed the problem.
If watching 25 or 30 (I dont have any) fps content and display is set to 50 or 60Hz, I need to use ffdshow framerate doubler filter (deinterlacing filter -> framerate doubler -> blend images).
I don't know what was the main problem here. Is it the display...
Use frame rate doubler
Just yesterday I realized what fixed the problem.
If watching 25 or 30 (I dont have any) fps content and...
TV-Server Version: SVN 09-06-2008
MediaPortal Version: SVN 09-06-2008
MediaPortal Skin: Monochrome
Windows Version: XP SP3
CPU...
Install Haali Audio Splitter (also know as Matroska Splitter).
-> Be sure to check .AVI support while installing this filter. By default, .AVI support is unselected! <-
Once installed, you can switch between mutiple audio tracks pressing the green button on mce remote or the A key on your keyboard (which could me mapped to any...
Install Haali Audio Splitter (also know as Matroska Splitter).
-> Be sure to check .AVI support while installing this filter. By...
I have some .AVi files with two audio tracks (AC3 and DTS). MP uses the AC3 sound, but i am not able to change to the DTS track. In...
hi everybody,
i've been using vista media center for some time and recently switched to mediaportal. but until now vmc was the only piece of software that could provide stutterfree playback of divx/xvid content on my tv but only when used in fullscreenmode. when vmc was started it somehow changed the refreshrate of my tv and gave...
hi everybody,
i've been using vista media center for some time and recently switched to mediaportal. but until now vmc was the...
hi everybody,
i've been using vista media center for some time and recently switched to mediaportal. but until now vmc was the...
I have a recording that plays with audio in MP but in WMP there is no sound. I have tried different codecs but can't get the sound to work. Any ideas?
I have a recording that plays with audio in MP but in WMP there is no sound. I have tried different codecs but can't get the sound...
I have a recording that plays with audio in MP but in WMP there is no sound. I have tried different codecs but can't get the sound...
Ok, I'll explain this problem as best I can. I have an external amplifier (Sony 3200) which is fed via digital co-ax output from my HTPC. If I play something with either Dolby Digital or DTS sound, everything is just fine. No problems at all. However, if I play something with ANALOGUE sound (a TV programme or audio) the amp...
Ok, I'll explain this problem as best I can. I have an external amplifier (Sony 3200) which is fed via digital co-ax output from...
Ok, I'll explain this problem as best I can. I have an external amplifier (Sony 3200) which is fed via digital co-ax output from...
TV-Server Version: 1.0.0.0 RC2
MediaPortal Version: 1.0.0.0 RC2
MediaPortal Skin: XFace
Windows Version: Windows XP (SP3)
CPU Type: Intel Pentium 4 - 2.80GHz
HDD: Samsung 250GB (+1.5TB storage)
Memory: 2GB
Motherboard: MS-6743 (MICRO-STAR INTL, CO.,LTD.)
Video Card: XFX Nvidia 7600GT (256 MB)
Video Card Driver: 91.21
Sound...
TV-Server Version: 1.0.0.0 RC2
MediaPortal Version: 1.0.0.0 RC2
MediaPortal Skin: XFace
Windows Version: Windows XP (SP3)
CPU...
TV-Server Version: 1.0.0.0 RC2
MediaPortal Version: 1.0.0.0 RC2
MediaPortal Skin: XFace
Windows Version: Windows XP (SP3)
CPU...
sorry all, figured it out... i disabled my other soundcard in system - device manager... all is good now :)
cheers
sorry all, figured it out... i disabled my other soundcard in system - device manager... all is good now :)
cheers
Hey all, I'm having issues playing sound in videos using HDMI audio, the HDMI audio works outside of media portal with VLC...
Found it. Seems exclusive directx is breaking the fullscreen playback of those x264 files.
Works without, and works with EVR (XP + .net3.5), but in both cases with massive tearing, even when vsync is allway on in the ati cc.
Found it. Seems exclusive directx is breaking the fullscreen playback of those x264 files.
Works without, and works with EVR (XP +...
Hi,
i just encoded a .ts recording to x264 in a mkv container with staxrip. It plays fine in WMP and graphedit. Also in MP when...
If its the motherboard you quoted with a 7100 gpu, it will struggle graphically, make sure in Bios, video memory is not set to auto, change to 128 or 256mb.
To be sure you have the best chance of everything working together, get SP3, make sure WMP11 is installed (certain updates only come with this installed), latest drivers for...
If its the motherboard you quoted with a 7100 gpu, it will struggle graphically, make sure in Bios, video memory is not set to...
Hi there. I am very new to MP. I have installed ffdshow and am able to watch HD movies (.mkv) without any problems. I have noticed...
Yes they are. Stuttering TV / video is handled by many threads here. I am pretty sure a search will find you some very good hints to solve your issue.
Yes they are. Stuttering TV / video is handled by many threads here. I am pretty sure a search will find you some very good hints...
When ffdshow is in the graph, it has the ability to right click the tray icon and select the various filters in the graph and view...
It doesn't work with m2ts containers containing LPCM streams.
I know the nero splitter works but Media Portal won't allow you to change streams with it.
What else is out there?
It doesn't work with m2ts containers containing LPCM streams.
I know the nero splitter works but Media Portal won't allow you to...
It doesn't work with m2ts containers containing LPCM streams.
I know the nero splitter works but Media Portal won't allow you to...
Well that does make sense, guess its never been a problem upto now. Pity there is no way just to take the few files that are involved with decoding and avoid installing the rest of Powercinema.
Thanks for the answer
:thx:
Well that does make sense, guess its never been a problem upto now. Pity there is no way just to take the few files that are...
TV-Server Version: 1.0 RC3
MediaPortal Version: 1.0 RC3
MediaPortal Skin: Blue2 Wide
Windows Version: Win XP SP3
CPU Type: AMD...
Hello, I want to play my mkv files with mpc-hc, but I don't know how launch mpc-hc in mediaportal. I want to press play in a film and automatically start the film with mpc-hc. It's possible?
Thanks.
Hello, I want to play my mkv files with mpc-hc, but I don't know how launch mpc-hc in mediaportal. I want to press play in a film...
Hello, I want to play my mkv files with mpc-hc, but I don't know how launch mpc-hc in mediaportal. I want to press play in a film...
The deinterlace (blend) shader is on the context menu under Shaders. You have to be in VMR renderless mode and your graphics hardware must support at least PS 2.0
In your case, the VMR Mixer was unable to perform hardware accelerated deinterlacing (gives you better quality for interlaced video). By choosing YUV Mixing mode...
The deinterlace (blend) shader is on the context menu under Shaders. You have to be in VMR renderless mode and your graphics...
TV-Server Version: 1.0 RC2
MediaPortal Version: 1.0 RC2
MediaPortal Skin: standard
Windows Version: XP Home SP3
CPU Type: AMD...