Post problems you have when using MediaPortal,
or pre installation questions in here.
Thank you everyone. Finally I reinstalled MP
Thank you everyone. Finally I reinstalled MP
Hi.
After my computer crashed yesterday, I´m not able to execute MP (w7 system). I´m getting this error window:
Translated...
I also missed this sometimes. Would be a really nice feature. :)
I also missed this sometimes. Would be a really nice feature. :)
Hi. I Start watch TV (with a big timeshift buffer on the harddisk.)
After 10 minutes I can go back to the beginning of the movie...
Aha - thanks.
Aha - thanks.
To ease the transition from a $ky box to MP it would be helpfup if all my channels were numbered the same as they are on that box...
i deleted the tvmp series db and uninstalled, reinstalled, all is working again.
I appreciate the help.
now i need to get my other client working, loses the tv server when trying to watch tv, add moving pictures and mptv series.
would like to automate filebot and not record shows already recorded, and name shows correctly so...
i deleted the tvmp series db and uninstalled, reinstalled, all is working again.
I appreciate the help.
now i need to get my...
so i go to bed so happy last night that I finally had mp setup and working. tv, 5.1, moving picutres, and mp tv series, all worked...
HI Owlsroost.
Last night i installed winTV and for some reason, even after stopping the Mediaportal TVservice - alli could see was a blank screen. All channels were detected in wintv but it wouldnt show anythign. Anyway i completley uninstalled my TV card from device manager, rebooted, re installed, rebooted and re mapped channels...
HI Owlsroost.
Last night i installed winTV and for some reason, even after stopping the Mediaportal TVservice - alli could see was...
I have just done a fresh install of media portal 1.2.2 with streamdmp and SAF6. im having issues with playing dvb-t tv. TV seems to...
I have been struggling for hours with this problem...can't find any info at all except a pointer to this software. Please forgive any errors re correct forum etc.
I have an HP Pavilion Elite E-570f desktop. Win7 64 bit installed.
Installed TV tuner (not sure of spelling but "Hauppage" seems to be the maker)
There is no...
I have been struggling for hours with this problem...can't find any info at all except a pointer to this software. Please forgive...
I have been struggling for hours with this problem...can't find any info at all except a pointer to this software. Please forgive...
Thanks for the response. Stupid me when setup I clicked the wrong setting did as you said and clicked SingleSeat Setup and all working now. Now onto EPG to get that working and I'll be happy.. thanks again!!
Thanks for the response. Stupid me when setup I clicked the wrong setting did as you said and clicked SingleSeat Setup and all...
Hi there I'm completely new to this so please bare with me.
I have installed Media Portal and configured the TV-Server Config. I...
Hello Forum,
I just removed my old Digital Everywhere S2 tuners and moved to DD. I am using the following tuner setup:
Digital Devices Cine S2 V6
Two single slot CI modules attached to the Cine CT, each to one port on the Cine CT -> it is NOT the new dual CI card
In DVBCineConfig tool I have assigned the CAM module in slot 1 to...
Hello Forum,
I just removed my old Digital Everywhere S2 tuners and moved to DD. I am using the following tuner setup:
Digital...
Hello Forum,
I just removed my old Digital Everywhere S2 tuners and moved to DD. I am using the following tuner setup:
Digital...
Hi
I have a setup running two Duoflex CT's and two cam modules, one for each DuoFlex. I have only enabled one tuner on each Duoflex since this is the only option that will update the TV-card. When watching TV there are no problems, everything is working as it should. But if I start recording a channel I get "Video Continuity error"...
Hi
I have a setup running two Duoflex CT's and two cam modules, one for each DuoFlex. I have only enabled one tuner on each...
Hi
I have a setup running two Duoflex CT's and two cam modules, one for each DuoFlex. I have only enabled one tuner on each...
push :(
push :(
Hi,
for details about my system look in my "System Specs" plz.
So i have a separate Server which runs 24/7. In this server is a...
This sounds ike a problem I had when I first installed my eyetv.
If you haven't already stumbled upon this solution, try removing the elgato drivers and reinstall using Teratec S7 drivers (a google search should find them - v1.0.7.601) - it's basically the same rebranded hardware, and these drivers work fine for me.
This sounds ike a problem I had when I first installed my eyetv.
If you haven't already stumbled upon this solution, try removing...
Hi All
Can anyone help me out please or point me in the right direction to my issue.
I have a eyetv sat free (external dvb-s2...
I think it's easier just to untick the formats in LAV audio so that ffdshow handles everything. I guess if I wanted LAV to handle a certain audio format for TV or Video but when playing Music in that format have it handled by ffdshow, I'd have to set it to LAV in MP config and then set FFDShow's merit higher than LAV for Music, but I...
I think it's easier just to untick the formats in LAV audio so that ffdshow handles everything. I guess if I wanted LAV to handle a...
With DVB-T radio I can use ffdshow to expand the stereo to extra speakers but with RadioTime it doesn't use ffdshow (I'm not sure...
I figured the correct settings out. There are a few frequencies that seem dead. I don't know if it's safe to remove them so I left them in.
Hope this helps someone :)
I figured the correct settings out. There are a few frequencies that seem dead. I don't know if it's safe to remove them so I left...
Since the switchover a scan of the DVB-T UK/Brighton Whtehawk Hill only gives me 16 channels. I've had a look at the frquency...
Well, the problem seems to be fixed :)
I have done a clean install of Windows 7, and at the same time installed a new release of the ATI drivers (12.3).
MediaPortal's auto refresh rate changer now works first time, without me having to set presets in ATI CCC. And, the renderer stats (shift+1) are automatically detecting the...
Well, the problem seems to be fixed :)
I have done a clean install of Windows 7, and at the same time installed a new release of...
My main monitor is a Sony 40EX503 LCD TV, this is connected via HDMI to my Yamaha RX-A810 amp, which in turn is connected via HDMI...
The function always on top is only in window mode interesting for me.
I do some other stuff on PC and watch TV in window mode. The TV should be always on top. If the other program needs more screen space I want to temporary deactivate the always on top function. I don't want to minimize MP because not all other programs I use, need...
The function always on top is only in window mode interesting for me.
I do some other stuff on PC and watch TV in window mode. The...
How can I define a shotcut to aktivate and deaktive the allways on Top option of the MP Window.
Or is there a key allready defined...
Yes "Paranoid Delusion" posts the limitation: It is necessary to shut down the video playback at this condition, so that Mediaportal doesn't crash.
Once again I hope with better words.
If I switch the mode. (ALT+ENTER) MP must shut down the video. After this I manually must start the TV again. Why?
MP has a start option if I...
Yes "Paranoid Delusion" posts the limitation: It is necessary to shut down the video playback at this condition, so that...
Hi. Wenn I watch TV.
If I switch from Fullscreen to MiniTv Mode or from MiniTv Mode to Fullscreen the Gui lost the TV.
1. Each time...
Same here
TV Service prevented my htpc from going into standby. Proof: after turning tvservice off manually it works, if tvservice runs, it does not work
Installing powerscheduler++ solved the problem promptly.
Same here
TV Service prevented my htpc from going into standby. Proof: after turning tvservice off manually it works, if tvservice...
A while ago I updated from 1.1 to 1.2.1 (fresh install). Since this update I have had a strange issue when going into standby. I...
Hey guys, I am not sure if this is the right place to post this, but I need some help.
I recently bought the Haupphauge HD PVR Gaming Edition. Everything works great but there is one problem.
Whenever I record, on the right side of the screen (recording), about one inch is just black. It is like the screen is pushed over to the...
Hey guys, I am not sure if this is the right place to post this, but I need some help.
I recently bought the Haupphauge HD PVR...
Hey guys, I am not sure if this is the right place to post this, but I need some help.
I recently bought the Haupphauge HD PVR...
It should back up plugins (though I never tested this). As to backing up movies, I do not think this plugin requires this/is intended for this. Instead the plugin should just restore MP's settings/databases/etc. and MP will expect your movies where they initially were located. So you better transfer movies separately.
It should back up plugins (though I never tested this). As to backing up movies, I do not think this plugin requires this/is...
Hi, First of all, I love this program and I've spent quite a bit of time configuring and customizing MP and finally have things...
Hi,
On the supported site, it now lists the 1500 in the DVB section, I have been using it, but diseqc hasnt worked on it, in media portal, does it now work?
As i have been looking into getting another card that is supported, such as the TerraTec Cinergy S2, if it now works, I will not need to, last time i tried (the current version)...
Hi,
On the supported site, it now lists the 1500 in the DVB section, I have been using it, but diseqc hasnt worked on it, in...
Hi,
On the supported site, it now lists the 1500 in the DVB section, I have been using it, but diseqc hasnt worked on it, in...
thanks for the reply rkhsaw. i ended up getting it going in the end. that script didn't work for me so i puzzled over it for a while and got it to work. i had to remove all the top code from it above var=%1% to get it to work. glad they're implementing this in the next release though thanks for the heads up deda (y)
thanks for the reply rkhsaw. i ended up getting it going in the end. that script didn't work for me so i puzzled over it for a...
MediaPortal Version: RC1
MediaPortal Skin: PurevisionHD
Windows Version: XP sp3
CPU Type: AMD x2 2.3
HDD: 1To
Memory: 2G...
Something similar happened to me recently. I was getting long pauses at "Loading Window Plugins". I would see the memory usage go up really high (memory leak?) and CPU usage get pegged at near 100%. By process of elimination, it turned out to be MP-TVSeries as well for me. I uninstalled MP-TVSeries and re-installed it and the problem...
Something similar happened to me recently. I was getting long pauses at "Loading Window Plugins". I would see the memory usage go...
MediaPortal Version: latest SVN (31-1)
MediaPortal Skin: StreamedMP
Windows Version: Windows XP Professional SP3
CPU Type: Intel...
Sdf, thanks for your answer.
Now, I would like to try to use a SQL statement in oder to schedule a radio recording.
There are any data model of the MP database?
I would like to now the table an its fields where the radio recordings are stored.
Bye,
tomtel289
Sdf, thanks for your answer.
Now, I would like to try to use a SQL statement in oder to schedule a radio recording.
There are...
Hi,
I would like to record the the evening news of my favorite radio station every day. I searched for a possibility within MP to...
Hi,
actually it was the DB which coursed the issue. In my case the best thing was to biuld up a totally new MySQL Database. But you can also try to repair it - do you use the mysql data base? if so then you can try:
create a Batch file-> open a textfile and save it as namexyzwhatever.bat
and include the following:
cd...
Hi,
actually it was the DB which coursed the issue. In my case the best thing was to biuld up a totally new MySQL Database. But...
Hi community,
since 2 days i have a major issue with the tv server appication. When i try to watch TV it says eg "no tv card is...
I reposted this in another forum here
https://forum.team-mediaportal.com/threads/trying-to-get-asus-combo-210x-aka-vixs-48b8-aka-vistaview-da-1n1-e-tuner-working.106934/
I reposted this in another forum here...
I reposted this in another forum here...
Hi there,
Without me tawling through your files - can you confirm a few things....
Is it just MePo that has no sound when the problem happens??
Is it everything in MePo that has no audio, or a specific type of content (TV, Movies, Music, etc)?
Can you check the OS/HTPC is not muted when you have the issue?
J.
Hi there,
Without me tawling through your files - can you confirm a few things....
Is it just MePo that has no sound when the...
I'm having a problem with the sound. If I reboot my pc and start MP the sound will work. If I close MP and restart it later I...
Currently the auto thumb generator does what it does ;)
Thumb handling in general needs sorting out and there is a mantis entry for this. Sorting out auto thumb generation however is not high on my list :(
Currently the auto thumb generator does what it does ;)
Thumb handling in general needs sorting out and there is a mantis entry for...
Hi!
I have a problem with creation of folder thumb in "Album Artist" view when dealing with compilations.
Here it is:
You...
I've tried:
- disabled the Aero desktop in windows, and changed settings to maximize performance, w/ no significant change.
- changed the timeshift directory to a dedicated esata disk w/ the vague idea there could be an issue writing the timeshift files to my system disk.
- changed to different codecs. Not sure which applies, but I...
I've tried:
- disabled the Aero desktop in windows, and changed settings to maximize performance, w/ no significant change.
-...
I've been using MP for just a few days. I'm having a problem w/ moderate to severe stuttering when playing live broadcast TV...
ok, thanks - it's really strange, I've added it manually now.
ok, thanks - it's really strange, I've added it manually now.
I re-downloaded transponder info, and rescanned Thor 0.8 multiple times.
Unable to find channel "VOX".
Does anyone know how-to...
Hi, I commented my configuration, and a problem I have.
3.06 Pentium Dual Core
ATI Radeon 5450 HD
4 Gb of RAM
OF 1 TB HD
Hauppauge WinTV-HRV 3000
Hauppauge WinTV-HVR 930 C
Hauppauge WinTV-HVR 5500
Engine Sat-3
100. Of Antema
I am a user of a cable television locally, as I said in my presentation I'm from Yecla (Murcia), and my TV...
Hi, I commented my configuration, and a problem I have.
3.06 Pentium Dual Core
ATI Radeon 5450 HD
4 Gb of RAM
OF 1 TB HD
Hauppauge...
Hi, I commented my configuration, and a problem I have.
3.06 Pentium Dual Core
ATI Radeon 5450 HD
4 Gb of RAM
OF 1 TB HD
Hauppauge...