hm strange.. maybe vista is the problem i have no experience with that or the coreavc
place the files in the VIDEO_TS folder because it gives problems when you do not do that with some movies
can you give your ffdshow settings and your computer setup so whe can compare the settings?
hm strange.. maybe vista is the problem i have no experience with that or the coreavc
place the files in the VIDEO_TS folder...
Hi there folks,
I realise this topic has been brought up in the past, but (unless I'm blind, hehe) I have not seen any concrete...
I don't see a volume OSD when lowering or raising the volume.
Any idea why?
TV-Server Version:
MediaPortal Version: Last
MediaPortal Skin: Monochrome
Windows Version: Vista & 7
CPU Type:
HDD:
Memory:
Motherboard:
Video Card:
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card:
1...
I don't see a volume OSD when lowering or raising the volume.
Any idea why?
TV-Server Version:
MediaPortal Version: Last...
I don't see a volume OSD when lowering or raising the volume.
Any idea why?
TV-Server Version:
MediaPortal Version: Last...
Sure, I could. I've already done that, but the nothing even showed up on the log files. I'll do it again though. Thanks. I tried turning on and off Windows IMAPI CD-Burning Service... just in case. But it didn't do anything. I get the same exact thing on the Vista setup. I'll post the log as soon as I get home. Thanks.
Sure, I could. I've already done that, but the nothing even showed up on the log files. I'll do it again though. Thanks. I...
Hello Everyone,
I started using MediaPortal just recently and have only seen version 1.0.2.
My Burner. Does it still work with...
OK, I generated some logs and had a little look and I could see a couple of plugins load - iplayer and VideoLan
I disabled them and it all worked
A little more work and it is the VLC plugin causing a problem, so for no I have disabled it
Interestingly, during the "test" it plays the file fine, as it does outside of MP too.
OK, I generated some logs and had a little look and I could see a couple of plugins load - iplayer and VideoLan
I disabled them...
TV-Server Version: 1.0.2.0
MediaPortal Version: ashraf
MediaPortal Skin: xface, but tried others
Windows Version: xp sp3
CPU...
I think we need to catch up here.
I did a clean install of 1.0.2. now and added a new , more powerful gfx card (Radeon HD 4550). But the plroblem is still there. when switching from a SD channel to a HD Channel MP freezes.
When pressing "Stop" and confirm with "stop" right after that I can see HD channel.
Does anybody has...
I think we need to catch up here.
I did a clean install of 1.0.2. now and added a new , more powerful gfx card (Radeon HD 4550)...
TV-Server Version: 1.0.2.
MediaPortal Version: 1.0.2.
MediaPortal Skin: Blue wide 3
Windows Version: Vista Home Premium 64bit...
That's because in Shares, it does not look at the tags. It looks at what you physically have on that harddrive folder. So since you have two different folders, it sees two different folders. Get it?
In the other modes all look at your tags. So it doesn't really care how you have the folders set up, it just reads the tags.
If you...
That's because in Shares, it does not look at the tags. It looks at what you physically have on that harddrive folder. So since...
TV-Server Version:
MediaPortal Version: 1.0.2
MediaPortal Skin: black & white 1080
Windows Version: XP sp3
CPU Type: c2d e6400...
Howdy,
Just installed mediportal 1.0.2 with a Hauppage wintv pvr 150 card.
TV works great but when i click to record something and then try to go back out of the record screen the record window stays on the screen all in black and i cant get rid of it. I have to shut down mediaportal and start again.
The same thing happens when...
Howdy,
Just installed mediportal 1.0.2 with a Hauppage wintv pvr 150 card.
TV works great but when i click to record something...
Howdy,
Just installed mediportal 1.0.2 with a Hauppage wintv pvr 150 card.
TV works great but when i click to record something...
There's also a tick box somewhere in configuration which enables MP to open where it was last time (rather than always opening at the home screen).
A mouse - you mean you haven't got IR remote control working ? - that'll cost you a few WAF points ;)
Tony
There's also a tick box somewhere in configuration which enables MP to open where it was last time (rather than always opening at...
Hello,
Is there any way Media Portal can provide ONLY the video features, i.e. go straight to that section?
Reason being, I...
I'd check the networking stuff - the other week I was watching TV and it suddenly became very stuttery - I eventually discovered that the wi-fi connection had stopped working (hung/crashed, basically) and this was upsetting all of the network related activities, including the MP <-> TV-server connection (which is set up to use the 'MS...
I'd check the networking stuff - the other week I was watching TV and it suddenly became very stuttery - I eventually discovered...
MediaPortal Version: 1.0.2
TV Server Version: 1.0.2
MediaPortal Skin: Monochrome Black
Windows Version: XP Home (SP3)
CPU Type...
When I play a videofile in MP 1.02 it will stutter like crazy and the CPU usage is very high. The strange thing is that when I open windows taskmanager too see how much cpu MP is using, and I click on it so it will become in focus instead of MP the video in MP is playing fine and the CPU usage goes down to around 10%
So in short. MP...
When I play a videofile in MP 1.02 it will stutter like crazy and the CPU usage is very high. The strange thing is that when I open...
When I play a videofile in MP 1.02 it will stutter like crazy and the CPU usage is very high. The strange thing is that when I open...
I recently updated from MP 1.0.0 to 1.0.2. The update itself went without any trouble but more than a week later I seem to have big problems when resuming from standby. When I put the pc into standby (or hibernate) and I come back a few hours later to resume MP crashes after resuming. I tried to find out what causes it but the...
I recently updated from MP 1.0.0 to 1.0.2. The update itself went without any trouble but more than a week later I seem to have...
I recently updated from MP 1.0.0 to 1.0.2. The update itself went without any trouble but more than a week later I seem to have...
directx it was
SO it looks like you all where right as always as i was missing all the directx i ran dxwebsetup.exedownloaded from micro's website and it told me i was missing some addons i downloaded them and now media portal worksso it looks like we got it working now thank you
i also attached the installer for any one else...
directx it was
SO it looks like you all where right as always as i was missing all the directx i ran dxwebsetup.exedownloaded...
hey all i am looking for some help i just upgraded to media portal 1.0.2 from 1.0.0 and now i can not open the main program i will...
Well, as a thumb of rule you should have all info in "My system" filled in and updated. (Although I think you got the important parts in your post - was mostly referring to mattfm).
See:
How to show System Specs
Well, as a thumb of rule you should have all info in "My system" filled in and updated. (Although I think you got the important...
TV-Server Version: 1.0.2
MediaPortal Version: 1.0.2
MediaPortal Skin: Blue
Windows Version: Vista Home Premium 32Bit
CPU Type: AMD...
No problem, at least i know it's not planned at the moment. I have full respect that you have other things in your life, that's a must to have:)
There should hopefully be someone with programming skills that have the same problem as me that could take care of this.
No problem, at least i know it's not planned at the moment. I have full respect that you have other things in your life, that's a...
Hi,
MediaPortal is GREAT!
But I have a problem, I want to disable DVB subtitles for a singel tv channel, is this possible...
Can't be the network/ip issue as it does it both when its on the network and when it isn't (hasn't been networked for a few months now, has no need to be).
Doesn't have a screensaver (just kills the video output after a certain amount of time) so I dont think its that, but i'll keep an eye out anyway.
Can't be the network/ip issue as it does it both when its on the network and when it isn't (hasn't been networked for a few months...
TV-Server Version: (Whichever version comes with MP 1.0.1)
MediaPortal Version: 1.0.1
MediaPortal Skin: StreamedMP
Windows...
Not quite sure what you're after, take a look in Application data or Program Data folder then Team MediaPortal\MediaPortal\thumbs\*
and in Team MediaPortal\MediaPortal check thru the *.xml files
Not quite sure what you're after, take a look in Application data or Program Data folder then Team MediaPortal\MediaPortal\thumbs\*...
Can anyone tell me how to retreive my IMDB data, everytime I upgrade MP I seem to loose
all my album art, etc. any ideas would be...
similar here, but on HD 1080i channels ( Sky Discovery HD, Sky Sport HD, Sky Cinema HD and Anixe HD). really, it looks like stop-motion movie . recordings from these channels show the same behaviour.
just my 2 cents...wish the devs would rollback.
similar here, but on HD 1080i channels ( Sky Discovery HD, Sky Sport HD, Sky Cinema HD and Anixe HD). really, it looks like...
TV-Server Version: TVE3
MediaPortal Version: Mediaportal 1.0.2
MediaPortal Skin: Blue wide 3
Windows Version: XP professional...