Post problems you have when using MediaPortal,
or pre installation questions in here.
Firewall is disabled
I live in Denmark Haslev.
cable provider is yousee
Frekvens 143000 kHz
Symbolrate 6875
Modulation 64
MP find nothing when doing manuel tuning with the "settings" aboveJust for fun I installed nextPVR and did a scan for tv channels here is what I got ( see attachment )
Do I need to create a new xml for...
Firewall is disabled
I live in Denmark Haslev.
cable provider is yousee
Frekvens 143000 kHz
Symbolrate 6875
Modulation 64...
Hello I 'm having an issue tuning tv channels with my HDhomeRun (HDHR) dvb-c tuner.
The HDHR can find all my channels, but I'm not...
Write only user. :(
Write only user. :(
i have my movies on an external drive connected to my htpc via esata. All works ok when this drive is on. However, when the...
Sorry for the double post, but it appeard that the post did not go through.
Sorry for the double post, but it appeard that the post did not go through.
I have a Leadtek Winfast DVT 2000 DS twin tuner, will this work with Media Portal, I have looked in the unsupported tuner list and...
I think it should be enough :)
I don't remember exact change needed, for sure TVE35 master branch is really old lol
I think it should be enough :)
I don't remember exact change needed, for sure TVE35 master branch is really old lol
Hi there :-)
Last weekend I tried to find a proper branch from git to build TVE3.5 for MP1 1.10,or 1.11, but I could not find one...
I do close MP and switch to PowerDVD, you need to get off your coach anyway to put the disk in the slot so you can also grab a keyboard and launch an app in the process if need be. I thought my PowerDVD did default to full screen mode nicely though. Been a while since I used it. I usually rip and watch through MP TBH. Though...
I do close MP and switch to PowerDVD, you need to get off your coach anyway to put the disk in the slot so you can also grab a...
Hi.
I recently got my hands on a Blu-Ray drive for the HTPC. And Its installed in the system fine.
If I insert a Blu-Ray disc into...
Just as a follow up.
My PC did not fully waken from deep sleep this morning.
Power light came on but no Hard drive activity and no signal through HDMI to TV.
Unable to waken it through remote, keyboard or mouse.
I will check Powercfg setting to see if everything is ok. Might be able to disable deep sleep.
I also want to test to see...
Just as a follow up.
My PC did not fully waken from deep sleep this morning.
Power light came on but no Hard drive activity and no...
I've completely rebuilt my HTPC as i couldn't get rid of the some MP errors.
I've now made a full system backup of it prior to any...
Thanks JCMP, working with your information.
I see what you mean about the Tag switch.
Going to try MayaHD skin tonight.
Thanks again for your advice, it's much appreciated.
Thanks JCMP, working with your information.
I see what you mean about the Tag switch.
Going to try MayaHD skin tonight.
Thanks...
Hi Folks, I have great succes getting rid of MS Media Center by using MP1 V1.11. Everyting is basically working OK and I want to...
jep youre 100% right, it was on 0 forgot :(... so easy ... :( to fast with setting up the new server i guess!
thanks
jep youre 100% right, it was on 0 forgot :(... so easy ... :( to fast with setting up the new server i guess!
thanks
I cant see it in the logs what is wrong.
But if i select 3 recordings at the same time (primetime shows).
only the show started...
wow.. thank you for your typingwork , that took a while , appreciated!
Timebased is not usefull, when a user selects a show, and sees an option to record the show on weekdays, you expect it to be based on the show , not on time. thats where the confusion starts in my view.
Nevertheless, your story makes it crystal clear what should...
wow.. thank you for your typingwork , that took a while , appreciated!
Timebased is not usefull, when a user selects a show, and...
When you select a tv show to record in a few days , and meanwhile the EPG gets an update with a different start/end time of the...
Thanks, this looks exactly what I need! :)
Yes, I know about the "start tv playback when entering tv section" but I want to even bypass that and have TV start when MP is launched. The plugin to suggested should do this. I'll give it a try. Thanks again! :)
Thanks, this looks exactly what I need! :)
Yes, I know about the "start tv playback when entering tv section" but I want to even...
Is there any way to have MP start playing Live TV as soon as it's launched?
I had a look at the Wiki for command line options, but...
Added to suggestion area in dev. Figured that was a better spot for this.
../threads/fix-recordings-to-respect-recording-limit.131110/
If it try to add the whole link though I get an error...
Thanks!
Added to suggestion area in dev. Figured that was a better spot for this...
Is there anyway to stop recording new episodes when the limit is reached.
Ex:
I have a schedule that is set to Every time for a...
...but look at the signal quality and discontinuities. If you were actually viewing TV, you'd be seeing pixellation, stuttering etc. I think your signal strength/quality is marginal.
...but look at the signal quality and discontinuities. If you were actually viewing TV, you'd be seeing pixellation, stuttering...
all of a sudden my setup has sopped receiving any channel 9 based channel. there should be various attempts in the log file. I...
Having a bit of trouble with the server file
Having a bit of trouble with the server file
Hiya,
I am new to MediaPortal and am hoping to migrate the household from WMC. I have installed and set up a quad tuner DVB-T2...
Actually, it records all showings on the specified day of the week. :D
In many cases this is not a problem, because the repeat is later in the week. But there is one radio programme that I record ("Inside Science") that is first broadcast at 16:30, and repeated on the same day at 21:30. Using "weekly on this channel" results in...
Actually, it records all showings on the specified day of the week. :D
In many cases this is not a problem, because the repeat is...
Just trying to understand functionality of the product..... Regarding the following recording option:
Record every time on this...
Hi and welcome...
This is up to you. If you decide to install MP now, you can save your MP configuration for later use if you want to do a clean install of Win 10. If you plan to do an upgrade without new installation of Windows (aka "Format C:") the MP installation should be kept.And by the way, MP will definitely be Win10...
Hi and welcome...
This is up to you. If you decide to install MP now, you can save your MP configuration for later use if you want...
Hi, I've been a happy user of WMC on Windows 7. I have 2 x HDHomeRun DVB-T dual tuners (model: HDHR3-DT) which connect to my LAN...
No idea, maybe post some logs? ;)
And please fill in your system specs.
No idea, maybe post some logs? ;)
And please fill in your system specs.
Hi guys,
What is the easiest method to allow the BluRays I have purchased to work in MediaPortal?
I was under the impression that...
Hi and welcome foxint ;)
Some additional information about the native blu-ray (and all other options) can be found in our Wiki:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/0_What's_New/1.3.x/Native_Blu-ray_Support
For the BDJ discs you can install the Blu-ray Handler plugin, which does not show the menus, but gives select from...
Hi and welcome foxint ;)
Some additional information about the native blu-ray (and all other options) can be found in our Wiki...
Hi
I am new and this whole programme is so complex. I tried to follow the installation. Then there were the options....I have no...
Ahh! Just noticed the actual message "The device is not ready" so checked all of my drives accessed by the scanner on my server and found a drive that was dead. De-selected it and the scan worked as normal. Apologies for the diversion.
Now to see what's wrong with the effected drive...
Ahh! Just noticed the actual message "The device is not ready" so checked all of my drives accessed by the scanner on my server and...
Since a recent MP application upgrade (think it was related to Trakt) I've been getting an Unhandled exception error when...
For external players you can use Eventghost.
For external players you can use Eventghost.
Guys,
A long time ago, I bought the HD-DVD Add-On Drive for my XBOX 360. It came with an XBOX 360 Universal Media Remote...
Hello and welcome :)
Yes, digital TV should be no problem.
For this to work you'll need to install software encoders:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/02_TV_Servers/7_Scan_Analog/Software_Encoding_Card_Setup...
Hello and welcome :)
Yes, digital TV should be no problem.
For this to work you'll need to install software encoders...
I currently run Windows 7 using WMC to control my TV Tuner = a Black Gold BG3620.
WMC is not to be available on Windows 10 and...
Hi.
The days I was using MP1 TV server I also had this issue real often. At boot time the TV server did not start as it lasts a while between mysqld actually is running and the MP database being accessible. This depends on many things and is not 100% reproducible. But in most cases the TV server did not start properly here after a...
Hi.
The days I was using MP1 TV server I also had this issue real often. At boot time the TV server did not start as it lasts a...
this morning I turned on my TV and this is what I got:
tried to start live TV (from the EPG page) and MP locked up, so I killed it...
Hi,
I am running the latest V1.11.0 Mediaportal. I have noticed in this version the lip sync is out by a second or so. If I play a movie in Power DVD or other apps the sync is fine so it is just with recorded TV.
Do you know how I can fix this?
Thanks in advance!
Hi,
I am running the latest V1.11.0 Mediaportal. I have noticed in this version the lip sync is out by a second or so. If I play a...
Hi,
I am running the latest V1.11.0 Mediaportal. I have noticed in this version the lip sync is out by a second or so. If I play a...
That's all up to the developer. As @Sebastiii said, it's working pretty fine for most discs, but still a few issues left. No ETA.
That's all up to the developer. As @Sebastiii said, it's working pretty fine for most discs, but still a few issues left. No ETA.
is there going to be some proper blue ray support at some stage, with proper menus? Its a major shortfall of media portal, the...
Great! :)
Thanks for reporting back. It's always nice to hear of problems solved successfully.
Great! :)
Thanks for reporting back. It's always nice to hear of problems solved successfully.
A couple days ago, I noticed that TV recordings that should have been in the recorded list were not there. I tried doing some quick...
I understand the concept of a .ts just being a container. I guess I should have given a better explanation to the fact that MP is a great TV recorder, like many recorders it is great at sacrificing size for the sake of being able to record live television on the fly. All recorders have to sacrifice something, whether it is speed...
I understand the concept of a .ts just being a container. I guess I should have given a better explanation to the fact that MP is a...
I recently installed MP 1.11. The main reason that I installed it is because I have considered upgrading to Win10 but I use...
I think this (the original volume issue) is a known bug, it was closed 5 years ago (but not actually fixed), I posted earlier before I found this thread https://forum.team-mediaportal.com/threads/volume-bug-again.130982/#post-1139257
I think this (the original volume issue) is a known bug, it was closed 5 years ago (but not actually fixed), I posted earlier...
Hello,
I got a strange issue on MP1.9.6. When I wake up MP over WOL, sometime I can't control the volume anymore, and I need to...
Well, mm1352000 IS the developer of TVE3.5, you couldn't be any closer to the source :cool:
Well, mm1352000 IS the developer of TVE3.5, you couldn't be any closer to the source :cool:
A question if I may for those folks with a deeper understanding of how TV Server works when picking tuners for recording.
If I...
Your MePo version is outdated. Install a more recent one and things should be OK again. I had no issue on 1.11 and can confirm that it works on 1.12pre also.
Your MePo version is outdated. Install a more recent one and things should be OK again. I had no issue on 1.11 and can confirm that...
Hello all,
Unfortunately the AutoDJ will not work for me. LastFM Plugin is installed and enabled. In the past in an old setup, it...
Thanks, that's perfect (y)
I think the log files are showing that the reason for the lockups is that MediaPortal is failing to connect to your TV Server's database.
Configuration is pointing towards an SQL Server database that should be available from a server called "COOTDOG-PC".
Can you please confirm that the client has access to...
Thanks, that's perfect (y)
I think the log files are showing that the reason for the lockups is that MediaPortal is failing to...
I have just setup my first MediaPortal server and client. No doubt have missed something here.
On the server I have a dual tuner...
Welcome back! :)
Yes and yes.
If you're going to try this I recommend you take a look at this:
https://forum.team-mediaportal.com/threads/cablecard-tuner-support-for-mediaportal-1.112585/
Welcome back! :)
Yes and yes.
If you're going to try this I recommend you take a look at this...
A few years ago I was using MediaPortal, until Comcast required the use of a cable card. I switched to a Ceton 4 card, and at the...