Post problems you have when using MediaPortal,
or pre installation questions in here.
SLI can give issues for certain games at least but yeah it would have been consistent as its always card #1 or #2 where #1 has the HDMI connection in this case (both identical GTX970s), not sure why its random but it did return after enabling SLI again however after restarting Mediaportal a few times for testing today it remained...
SLI can give issues for certain games at least but yeah it would have been consistent as its always card #1 or #2 where #1 has the...
Just started playing around with Windows 10 (RTM) and Mediaportal runs great on it, only noticed that on rare occasions when I...
Note, I have now updated the wiki to clarify:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/13_Plugins/XmlTv
Hopefully that was the page you were looking at (you didn't specify!), and the clarification meets your approval. :)
Note, I have now updated the wiki to clarify...
For the life of me....can't work out how to get this file.:cry:
MP Wiki says...
"A xmltv.dtd from the official xmltv association...
After remuxing hundreds of bluray movies and TV-series, last week I prepared the series "The Americans" for viewing in Mediaportal through the TV-series plug-in. Remux went smoothly and I got 12 episodes to watch. When starting the first, the Dutch subtitles looked weird: they had white outlines and black fills instead of the other...
After remuxing hundreds of bluray movies and TV-series, last week I prepared the series "The Americans" for viewing in Mediaportal...
After remuxing hundreds of bluray movies and TV-series, last week I prepared the series "The Americans" for viewing in Mediaportal...
I was using Media browser - then started using Emby - but Emby dropped support of DVD and blue ray play back.
so my movies being TS folders direct 1 to 1 copys of dvds i own no longer work. - so I decide to go to media portal - so far I like it - the load times seem little slower across the network I use a NAS device to store my...
I was using Media browser - then started using Emby - but Emby dropped support of DVD and blue ray play back.
so my movies being...
I was using Media browser - then started using Emby - but Emby dropped support of DVD and blue ray play back.
so my movies being...
Using awake mode does prevent the problem.
I actually tried a clean install of Windows 10, without any success fixing it that way. And I also briefly tried the JR Rivers trial version of their software and got similar messages.
And today I discovered some old postings from 2012 on the web from other people having this problem with...
Using awake mode does prevent the problem.
I actually tried a clean install of Windows 10, without any success fixing it that way...
I just upgraded to Windows 10 (64 bit), and have been trying to get Media Portal working so I can continue using my Ceton Infinitv...
I unchecked preventing duplicate recordings and the show recorded last night. Success! Thanks again for your help.
I unchecked preventing duplicate recordings and the show recorded last night. Success! Thanks again for your help.
I am new to MePo. I have almost everything working great. I love to tinker and have found an answer to most of my questions, which...
Maybe this is a bug?
I have set the value for vertical scrolling in configuration to "1"
But most of the time the textboxes run too fast (Value 3?)
I created logs and this is what I did:
vertical scrollspeed in config is set to value 1
Start MP
--> EPG (Description1 textbox: Speed 1 = OK)
--> Play some music files and went to...
Maybe this is a bug?
I have set the value for vertical scrolling in configuration to "1"
But most of the time the textboxes run...
Maybe this is a bug?
I have set the value for vertical scrolling in configuration to "1"
But most of the time the textboxes run...
Very true.
But I've got this working in MediaPortal.
Tony
Very true.
But I've got this working in MediaPortal.
Tony
Hello
It seems that a program's episode name is not being collected and placed in the episode name field of the .vs file of a...
I think the UNC is better but you need the share the timeshift folder manually.
There is a profile which does not required transcoding.
I think the UNC is better but you need the share the timeshift folder manually.
There is a profile which does not required...
Hello,
I would like to ask you for your opinion about suitable CPU for TV Server and MP client.
Some data as input would be as...
Looks like TeamViewer have fixed the problem in the latest release.
Looks like TeamViewer have fixed the problem in the latest release.
I've got a freaky problem with my HTPC. For the last few days it's been turning itself on every half hour, whether anything is...
I tried sifting through the wiki it seemed to be a bit overwhelming? or maybe just not intuitive enough for me to actually find the information i was looking for. I apologize for this.
I never "added" channels i just did the whole scan on the tuners then got the sd plugin ill have to sift through the features and see what does what...
I tried sifting through the wiki it seemed to be a bit overwhelming? or maybe just not intuitive enough for me to actually find the...
I dont know if this is in the proper section. I am new to MediaPortal. I have 6 tuners SiliconDust HDHomerun Prime (2). I have...
Always on top doesn't work correctly in my windows 10.
In normal mode it stays on top, but it doesn't let me interact with other windows (it is not only on top but also in focus and I can't change it). So I can't work on other open windows.
If I switch to mini TV mode it does work correctly, but when I enter fullscreen and exit or...
Always on top doesn't work correctly in my windows 10.
In normal mode it stays on top, but it doesn't let me interact with other...
Always on top doesn't work correctly in my windows 10.
In normal mode it stays on top, but it doesn't let me interact with other...
As you are using a Harmony One, I can assure you that this remote works 100% in combination with MediaPortal.
Notwithstanding you need to select the correct hardware profile in the Logitech setting (it needs to be set up as MCE). There are many people arounf here who are using the same remote, some of which have posted details on how...
As you are using a Harmony One, I can assure you that this remote works 100% in combination with MediaPortal.
Notwithstanding you...
so the screen started to go blank whenever i stop watching tv or its just left on as soon as i press a button on the remote the...
TV-Server Version: 1.12
MediaPortal Version: 1.12
MediaPortal Skin: Titan
Windows Version: 7
1. TV Card: Hauppauge Colussus - Controls Cable Set-top-box
2. TV Card: Hauppauge HVR-1600 - QAM
3. TV Card: Hauppauge HVR-2255- QAM/Analog
4. Network Tuner: HDHomeRun PRIME CableCard
Satelite/CableTV Provider: U.S. Cox Cable Digital
Remote...
TV-Server Version: 1.12
MediaPortal Version: 1.12
MediaPortal Skin: Titan
Windows Version: 7
1. TV Card: Hauppauge Colussus -...
TV-Server Version: 1.12
MediaPortal Version: 1.12
MediaPortal Skin: Titan
Windows Version: 7
1. TV Card: Hauppauge Colussus -...
Hello and welcome :)
Are you attempting to install MediaPortal 1 or MediaPortal 2?
I'm asking you this because this section of the forum is for MediaPortal 1 questions/support, but from the nature of the question I suspect you may be attempting to install MediaPortal 2.
Regards,
mm
Hello and welcome :)
Are you attempting to install MediaPortal 1 or MediaPortal 2?
I'm asking you this because this section of the...
After beginning the install .exe, I get a pop up warning that the program cannot be installed without DirectX 9c, then the...
ok so over the last day ive had a nightmare with media portal first the tv tuners decide to un map them selfs then when there re mapped it recorded to c drive filling it up causing more problems. after re mapping the recorded tv to the right drives media portal wouldnt see the tv server and i had to replace the gentle config to get it...
ok so over the last day ive had a nightmare with media portal first the tv tuners decide to un map them selfs then when there re...
ok so over the last day ive had a nightmare with media portal first the tv tuners decide to un map them selfs then when there re...
Fantastic... Thnx a lot for your help :-)
Fantastic... Thnx a lot for your help :-)
Hello Everyone
After updating I can not shutdown Windows via my remote (Skin shutdown menu). It seems to me to be related to some...
Hi
OK. That is in your case the best solution.
I do not know of a way to disable the scrolling. Check the settings for the home plugin if this is possible.
//EDIT
You see TV twice because the skinner has reserved space for five entries and since you have only four enabled plugins, the home plugin will fill the available space...
Hi
OK. That is in your case the best solution.
I do not know of a way to disable the scrolling. Check the settings for the home...
Hello.
I'm loving MediaPortal. It's elegant and seems to work very well for my OTA needs.
I have DefaultWide skin loaded with only...
When I restart the service I am able to start and stop the timeshift without problem, but it eventually locks up again.
When it locks up, I am unable to stop the stream from the manual control page.
I don't seem to have any problem replicating the problem from the manual control page.
When I restart the service I am able to start and stop the timeshift without problem, but it eventually locks up again.
When it...
Hi,
I recently installed MP1.12 onto my Windows 7 pc after finally giving up on WMC.
I have a twin TBS6982 dbv-s2 tuner.
The...
UK Freeview (terrestial TV) provides a 7-day EPG.
If you need more sophisticated/automated record scheduling than the base MP provides, look at plug-ins like TvWishList - https://forum.team-mediaportal.com/threads/tv-server-plugin-tvwishlist.76506/
UK Freeview (terrestial TV) provides a 7-day EPG.
If you need more sophisticated/automated record scheduling than the base MP...
I have a couple of PCs, with Hauppauge tuners, which I've used as Media Center PCs for about 10 years. As a trial, I've upgraded...
MP1
MP2
[solved]
MP1 TV-Service.exe crashes Win8.1 and Win10 on Asus Z170M-Plus, LGA 1151, Skylake i5
DE
There is. You should see a "thread options" with a drop down menu at the top of the screen. There is an option to modify the thread title where you can also change the prefix.
Set to "solved" as per your request.
There is. You should see a "thread options" with a drop down menu at the top of the screen. There is an option to modify the thread...
Hi.
Been using MP several years with great joy.
Updated my system to new cpu: Intel Skylake i5-6600K, MB: Asus Z170M-plus Micro...
In my upgraded Windows 10 system where I installed new MP 1.12.0 I succesfully configured MP TV series with all series listed in the configuration.
However inside MediaPortal entering My TV Series for example Once Upon A Time is not listed. The extension (mkv) is added in the Video extensions list and same extensions TV series are...
In my upgraded Windows 10 system where I installed new MP 1.12.0 I succesfully configured MP TV series with all series listed in...
In my upgraded Windows 10 system where I installed new MP 1.12.0 I succesfully configured MP TV series with all series listed in...
That's it caught plug-in rather than reduce cpu. - knew it had to be something simple
That's it caught plug-in rather than reduce cpu. - knew it had to be something simple
I'm getting a random "Please Insert Disc" messages poping up - when I'm not doing anything. When I say not doing anything I mean...
No need to put the .patch somewhere :) (it's for dev to look @ the change) but you have to put files there :
C:\Program Files (x86)\Team MediaPortal\MediaPortal
Good luck :)
No need to put the .patch somewhere :) (it's for dev to look @ the change) but you have to put files there :
C:\Program Files...
Hello everyone,
I just up graded my MB and CPU for an intel i5 and ASUS Micro ATX DDR3 2600 LGA 1150 Motherboards H97M-PLUS...
Hello again
Working like a charm with LAV but because of my DTS problem I install AC3filter and now I have the DTS sond propelly sent to my amplifier without crash.
Many thanks for your help mm1352000.
Best regards
Hello again
Working like a charm with LAV but because of my DTS problem I install AC3filter and now I have the DTS sond propelly...
Hello
my htpc crash when i watch a tvserie, can be a xvid or mkv. If i restart mediaportal I can watch the file but when I try to...
Those 22 pages were very interesting as it happens!
Although most of the discussion was about quality on audio and video chipsets there is a lot of good information and a couple of tweeks I have made notes to try later.
I do not notice problems with MediaPortal Audio on the Video setup and my TV is set for Direct Sound.
I am going to...
Those 22 pages were very interesting as it happens!
Although most of the discussion was about quality on audio and video chipsets...
Hi, Strange effect on my single seat MP1 setup.
I use a BlackGold TV Card that has 2 x DVB-S and 2 x DVB-T in the UK.
Most of my...
I kind of agree, but once you understand it's not a big deal. It actually makes sense as far as how the deletions are structured in all other cases. Maybe the warning could explain more clearly and it wouldn't seem so ominous. With the changes added to the wiki, maybe it will be a little easier in the future. So long as people...
I kind of agree, but once you understand it's not a big deal. It actually makes sense as far as how the deletions are structured in...
Hi guys
I tried to delete some TV shows I didn't want and it keeps coming up with an error saying it can't delete!
I have tried...
Tinkerer, this thread is more than 3 years old. It's... dead. ;)
Could you please try what I asked you to try in your original thread:
https://forum.team-mediaportal.com/threads/switching-from-wmc-with-hauppauge-pvr-2250-to-mp2.131490/page-4#post-1147281
Tinkerer, this thread is more than 3 years old. It's... dead. ;)
Could you please try what I asked you to try in your original...
Okey, I give up after browsing and searching this forum for hours, without any luck..
I have just returned to MP and I feel like...
:eek:
:LOL:
/mrj
:eek:
:LOL:
/mrj
My normally reliable MP1.2 has stopped playing live TV following soon after changing my TV tuner card. XP SP3 with .dotnet up to...
Thanks for your reply.
None of the above mentioned PCs is the Server. The System specs of the Server can be find in the system specs. The IP 192.168.1.55 indead belongs to the server.
BUT:
I "solved" the problem. Sad is: i don't know how. What i did is i changed the Codec for TV from the Microsoft Codec to LAV but i can't imagine...
Thanks for your reply.
None of the above mentioned PCs is the Server. The System specs of the Server can be find in the system...
I'm running a multi-seat MP installation with a HTPC Server which is accessed by the following devices:
Android Phones via MP-App...