Post problems you have when using MediaPortal,
or pre installation questions in here.
Yes but only under conditions:
I have it working:
1: I have installed the latest SVN, 0.2.2.0 I dont know
2: remove all codecs
3: install Haali filter
4: install ffdshow
5: install AC3 filter
6: install VOBSub
7 in MP config.exe at the video part select VObsub autoload and make MP load the autoload Vobsub
8: play...
Yes but only under conditions:
I have it working:
1: I have installed the latest SVN, 0.2.2.0 I dont know
2: remove all...
is there a way to change audio streams in mp
im able to change audio streams in my external player (mplayer)
but when i try to...
Hi everybody.
My Medion 7134 card cannot scan for CableTV only for sattelite and Terrestrial - why??.
When i use the same card in with Powercinema i can choose if i want to scan for CableTV or Terrestrial TV.
I have tried different driver versions but with no luck. Everything else works fine. :)
Hi everybody.
My Medion 7134 card cannot scan for CableTV only for sattelite and Terrestrial - why??.
When i use the same...
Hi everybody.
My Medion 7134 card cannot scan for CableTV only for sattelite and Terrestrial - why??.
When i use the same...
I was translating for chinese mediaportal. I read the code. To be found Laws fonts.xml and strings.xml. I discovered that As graphic memory poor performance. GUIFont.cs execution of the "_textureWidth > d3dCaps.MaxTextureWidth " time, the document will be narrowed into dds document font size. This shows that the Chinese characters on...
I was translating for chinese mediaportal. I read the code. To be found Laws fonts.xml and strings.xml. I discovered that As...
I was translating for chinese mediaportal. I read the code. To be found Laws fonts.xml and strings.xml. I discovered that As...
Just installed MP for the first time on my Win. MCE 2002 with all updates and service packs. When i installed it, it detected my Kworld USB tuner and scanned and found channels. But not when I open the program and try to set up the TV, it crashes. I didn't install any drivers or anything as it seemed to detect everything OK. All I did...
Just installed MP for the first time on my Win. MCE 2002 with all updates and service packs. When i installed it, it detected my...
Just installed MP for the first time on my Win. MCE 2002 with all updates and service packs. When i installed it, it detected my...
It may be that there was a momentary power interruption. You can set most computers to re-start after a power interruption. This is done in the BIOS. Yours may be set to do this.
It may be that there was a momentary power interruption. You can set most computers to re-start after a power interruption. This is...
I was sitting on my laptop talking on msn, as you do lol. When all of a sudden my Home Theatre PC switched on by itself, from power...
Yeah I tried to email them recently but haven't heard back. Hopefully this thread will show them the interest!:D
Yeah I tried to email them recently but haven't heard back. Hopefully this thread will show them the interest!:D
Does anyone know if it is possible to gain support for this tv tuning usb adapter? I tried to go through the steps to add a card...
Come on :) .. yes.
Now maybe I'm using the wrong install? When it says to get the newest version of MediaPortal WebGuide I just went to the asciiexpress webpage and downloaded the newest version.
Come on :) .. yes.
Now maybe I'm using the wrong install? When it says to get the newest version of MediaPortal WebGuide I just...
I've got my TV Server working and want to add the web interface (webguide). I went over all the install guides and I'm able to...
no problems here with the same and higher resolution.
please attach your logfiles to the fist post-
no problems here with the same and higher resolution.
please attach your logfiles to the fist post-
Hi,
I have been using MP for a few weeks without any issues but now have a problem since upgrading my LCD screen to a larger...
Try running the MCE standby tool, there is a setting to re-enable the ehome receiver after standby.
Yes it works with XP, and good for making sure your system will do what it's supposed to regarding standby\hibernate.
Try running the MCE standby tool, there is a setting to re-enable the ehome receiver after standby.
Yes it works with XP, and...
MediaPortal Version: 0.2.2 SVN
MediaPortal Skin: Spinsafe
Windows Version: XP MCE SP2
CPU Type: AMD Athlon64 3200+
HDD: Samsung...
I have the same "problem". "Smart" gives the best deinterlaced picture for me, but a little blurry. "Film" gives very clear picture, but interlace-artifacts in movements. Are there any TV-cards that have line doubler? Maybe thats whats needed?
I have the same "problem". "Smart" gives the best deinterlaced picture for me, but a little blurry. "Film" gives very clear...
Hi!
A question regarding TV picture quality. Not an expert in this at all but i guess it has to do with interlacing or the like...
According to someething i read a couple of days ago, Automatic is now the best choice - it used to be Smart, but they changed a few things in the latest drivers.
"when using the ForceWare 91.47 and newer along with the latest PureVideo decoder builds Automatic is now the best setting. With the new drivers and the Automatic setting a...
According to someething i read a couple of days ago, Automatic is now the best choice - it used to be Smart, but they changed a few...
MediaPortal Version: Version 0.2.2.0
MediaPortal Skin: Blue Two Wide
Windows Version: Windows XP sp2
CPU Type: Intel Pentium D...
MediaPortal Version: 0.2.2
MediaPortal Skin: bluetwo
Windows Version: xp
i just installed mp =]
and we have an extra remote from our HP media center PC
i checked off used MCE remote and i downloaded teh drivers for the remote, just nothing is working no buttons on the remote. the reciver does receive the signal tho =]...
MediaPortal Version: 0.2.2
MediaPortal Skin: bluetwo
Windows Version: xp
i just installed mp =]
and we have an extra remote...
MediaPortal Version: 0.2.2
MediaPortal Skin: bluetwo
Windows Version: xp
i just installed mp =]
and we have an extra remote...
Solution
Thanks for the reply. I checked to make sure the TV was the primary display and it was. It was the only display I was using. Another problem I was having was the OS kept popping up an error message that I could not get rid of. Every time the message popped up it would prevent the TV signal from being displayed. To fix that...
Solution
Thanks for the reply. I checked to make sure the TV was the primary display and it was. It was the only display I was...
SOLVED!!!
MediaPortal Version: 0.2.2.0
MediaPortal Skin: BlueTwo
Windows Version: Windows MCE
CPU Type: Intel 2.4 GHz
HDD: 40 GB...
Still asking the same..?!?
Still asking the same..?!?
Hello..!
I'm totally new to MP..installed yesterday and so far it works good..except for DiSEcQ-switching...
I have a...
i thought it might be that but i get rss feeds to my google toolbar in IE and infact one of them is from that exact same weather site. thanks for your help and ill keep trying.
i thought it might be that but i get rss feeds to my google toolbar in IE and infact one of them is from that exact same weather...
My media Portal Doesnt seem to be able to connect to the internet to search for weather or rss feeds. i'm connected through a...
Tried removing all the channels and reimporting them from my original backup of the channels and it didnt work, so I used the new backup and it didnt work.
renamed the tvdatabase and created a new one, didn't work.
Set all the tv cards so that they were disabled for viewing or recording and then went into MyTV and to my suprise I...
Tried removing all the channels and reimporting them from my original backup of the channels and it didnt work, so I used the new...
Right, whole collection of problems which are all related but I cannot work out what caused it or how to fix it.
I was using an...
Then this should be marked as a bug?
Then this should be marked as a bug?
For some reason, and most likely other users can reproduce this issue, when I select to use NTSC format on my capture card, when I...
@ Taipan... I'm sorry to hear that you've started getting this problem :( but (you'll hate this) I'm happy that i'm not the only one experiencing this issue :) - I was worried it might be some major problem with my system.
Contrary to my earlier post, I am now able to reproduce this error just about every time I manually stop a...
@ Taipan... I'm sorry to hear that you've started getting this problem :( but (you'll hate this) I'm happy that i'm not the only...
MediaPortal Version: 0.2.2.0
MediaPortal Skin: B2 Wide
Windows Version: WinXP SP2
CPU Type: AMD Opteron 165
HDD: Samsung 200GB...
[Is it absolutely neceassary to install the elements of MP in the order shown in the videos?
1. SLQ
2. TV engine (msi)
3. Media Portal
4. SVN
5. TV engine client
Are there any changes as far as the order of installation is concerned possible/recommendable?
Which is the major source of errors?
I did everthing according to...
[Is it absolutely neceassary to install the elements of MP in the order shown in the videos?
1. SLQ
2. TV engine (msi)
3. Media...
[Is it absolutely neceassary to install the elements of MP in the order shown in the videos?
1. SLQ
2. TV engine (msi)
3. Media...
That sounds easy enough. Thanks for the info.
That sounds easy enough. Thanks for the info.
I did a search on the forum, but didn't find anything. Maybe I'm just searching for the wrong thing. Anyway how can I get a...
Any solution to this topic?
I've tried to set the brightness via the tweak tool, but it won't affect the picture recorded by my pvr-250.
/Bosso
Any solution to this topic?
I've tried to set the brightness via the tweak tool, but it won't affect the picture recorded by my...
In the Hauppuage settings you can play with brightness, contrast, saturation, and so forth. These no longer appear in the MP...
lol oh okay, just pull up with it for a bit then on the 5th time of starting MP i can get rid of it. Thanks :D
lol oh okay, just pull up with it for a bit then on the 5th time of starting MP i can get rid of it. Thanks :D
I'm using the latest release of Media Portal, 0.2.2 i beleive, i downloaded the Spinsafe skin and when MediaPortal starts a red...
please
please
MediaPortal Version: Latest
MediaPortal Skin: Standard Blue Skin
Windows Version: xp pro
CPU Type: p4 1.8ghz
HDD: 400gb ide...
I have the same card, and the same problem. Have installed WinDVR3 and now I don't get any error message anymore but still got a black screen when I want to watch tv. But when I start media portal and switch on the tv and also start another program for watching tv, and I switch from post, then is also switched on the other program...
I have the same card, and the same problem. Have installed WinDVR3 and now I don't get any error message anymore but still got a...
`hello,
i have a medion 7134 tv card ( philips ) and when i want to watch tv it says cant greate graph?
who knows a solution...
Hi,
I have exactly the same Problem.
There are certain steps where the scanning stops an all I can do is reboot.
Please tell me if you get this problem fixed.
Hi,
I have exactly the same Problem.
There are certain steps where the scanning stops an all I can do is reboot.
Please tell...
MediaPortal Version: 2.2.0.0
MediaPortal Skin: MCE Blue
Windows Version: XP Pro
CPU Type: FX60
HDD: 1TB
Memory: Corsair...
Does anyone have some quick instructions for me to configure mediaportal to allow my streamzap remote to turn subtitles on or off please?
Does anyone have some quick instructions for me to configure mediaportal to allow my streamzap remote to turn subtitles on or off...
Does anyone have some quick instructions for me to configure mediaportal to allow my streamzap remote to turn subtitles on or off...
I finally found the information I was looking for on the current status of the Weather Overlay plugin, and it looks like "mofux" (the author of this plugin) is in the process of re-writing the plugin to provide better functionality .... :)
I finally found the information I was looking for on the current status of the Weather Overlay plugin, and it looks like "mofux"...
The version of the WeatherOverlay.dll that I have is dated 03-03-2006 and doesn't appear to work with the latest SVNs of...
MediaPortal Version: 0.2.2
MediaPortal Skin: BlueTwo
Windows Version: Xp Pro + SP2
CPU Type: AMD Athlon 64 X2 Dual 3800+
HDD: 250 GB
Memory: 1024 mb
Motherboard: Gigabyte SSeries: GA-M61PM-S2
Motherboard Chipset:nForce 430
Motherboard Bios:
Video Card: Nvidia Geforce 7300 GS
Video Card Driver: 93.81
Sound Card: Onboard...
MediaPortal Version: 0.2.2
MediaPortal Skin: BlueTwo
Windows Version: Xp Pro + SP2
CPU Type: AMD Athlon 64 X2 Dual 3800+
HDD...
MediaPortal Version: 0.2.2
MediaPortal Skin: BlueTwo
Windows Version: Xp Pro + SP2
CPU Type: AMD Athlon 64 X2 Dual 3800+
HDD...
Thanks! That worked!
/Salmoneus
Thanks! That worked!
/Salmoneus
I try to configure dvd playback to use reclock as audio renderer, but that produces an error when i play a dvd. It says my graphics...
Hi,
how do I rate videos?
thx stax
Hi,
how do I rate videos?
thx stax
Hi,
how do I rate videos?
thx stax