Post problems you have when using MediaPortal,
or pre installation questions in here.
Thanks, I disabled the plugin and so far I havent noticed the same problem. Cheers :)
Thanks, I disabled the plugin and so far I havent noticed the same problem. Cheers :)
Hi,
I've got a strange problem where I watch a TV program and then after a second or so, it zooms in slightly.
Sometimes this...
Hab das Problem selbst lösen können. Einfach MediaPortal drüber installieren und die Skin Einstellungen neu machen und fertig.
Hab das Problem selbst lösen können. Einfach MediaPortal drüber installieren und die Skin Einstellungen neu machen und fertig.
Hallo Leute,
ich habe einen neuen PC zusammen gebaut und nachträglich das VFD-Display angeschlossen.
Seit dem habe ich wie in den...
Glad you are up/running, was curious about your results. I don't have USB tuners, just HDHR ATSC ethernet connected tuners. Used a test system, Dell Inspiron "everyday" laptop, Win8.1, Ivybridge i3-3227U 2-core 4-thread, 1.9 GHz. For testing 5 HDHR tuners 100 mbs Ethernet, with 3 MePo Clients, local, 2 remote. Used Win8.1 Task Manager...
Glad you are up/running, was curious about your results. I don't have USB tuners, just HDHR ATSC ethernet connected tuners. Used a...
I have the following two USB tuners connected to my Mac Mini:
Cinergy T Stick DUAL RC (2xDVB-T)
Terratec H7 (1xDVB-C, recently...
Hello and welcome John :)
I suggest you follow the instructions in the CableCARD thread:
https://forum.team-mediaportal.com/threads/cablecard-tuner-support-for-mediaportal-1.112585/
Particularly:
1. Install the UPnP patch.
That should at least fix this:
2. Post log files with channel names, dates/times etc.
As it says in the...
Hello and welcome John :)
I suggest you follow the instructions in the CableCARD thread...
Primary Issue: Unknown Error
I receive the same unknown error in my tv and channel preview. See thread below...
Just to update this for anyone who stumbles across this old thread: Updating to a Haswell Intel NUC and Windows 8.1 has done nothing to solve the crashing problem. In fact the NUC has no optical out so now I must buy a Dr HDMI again!
Just to update this for anyone who stumbles across this old thread: Updating to a Haswell Intel NUC and Windows 8.1 has done...
Steps to Reproduce:
1. Use MP in any way.
2. Turn off TV.
3. Turn TV back on.
4. Windows error appears.
Using Windows 7, MP...
My HTPC running MP 1.9 is always on. The only that I do is switch off my TV and Receiver (or sometimes change input).
9 our of 10 times MP crashes -not immediately- but after a few seconds and sometimes minutes when I switch 'back' to MP input.
I'm assuming that it has a relation to switching inputs (HDMI) but not sure.
I always...
My HTPC running MP 1.9 is always on. The only that I do is switch off my TV and Receiver (or sometimes change input).
9 our of 10...
My HTPC running MP 1.9 is always on. The only that I do is switch off my TV and Receiver (or sometimes change input).
9 our of 10...
Your system is quite common and not unusual.
However, the description above contains no useful information other that you have sound problem and display issues.
As a personal comment: you complained about lack of response elsewhere. What do yo expect if you do not even bother to post logs?
So first thing to do is to download and...
Your system is quite common and not unusual.
However, the description above contains no useful information other that you have...
Hi all,
I had this combo (details in systems specs) working well but I made a mistake with the installation of W7 and started over...
It happen also on my side when the screen goes OFF (HDMI is removed and audio that comes with it).
It happen for me when mp is windowed and even when playing video (from MP in fullscreen, screen not goes to off and then audio is not removed).
But for music, it's different screen can goes off to avoid to burn plasma screen etc. and...
It happen also on my side when the screen goes OFF (HDMI is removed and audio that comes with it).
It happen for me when mp is...
Hi,
With my new installation of a client pc, the video and TV stops playing after a few seconds or minutes..
MP doesn't hang, it...
Uninstalling MySQL does not delete the database.
Yes, that would work. :)
For those that prefer a GUI:
https://forum.team-mediaportal.com/threads/media-portal-has-suddenly-gone-fubar.128259/page-2#post-1108428
Uninstalling MySQL does not delete the database.
Yes, that would work. :)
For those that prefer a GUI...
Seemed to get MP1 (1.8.0) installed, restored backup, configured TV card (Nova 500), then noticed computername was inconsistent and...
Hi,
Can you try upgrade to 1.10 Pre Release? I have added a database integrity check to see if there is a db corruption.
Hi,
Can you try upgrade to 1.10 Pre Release? I have added a database integrity check to see if there is a db corruption.
Hello,
I was watching a video file and the computer locked up and needed a hard reboot. Now Mediaportal no longer starts and comes...
I see. Thanks for the help. I am not sure that I will be able to get to this soon, but if this isn't marked solved, I'll try to test a new bin.
I might be able to test over the next month.
-S
I see. Thanks for the help. I am not sure that I will be able to get to this soon, but if this isn't marked solved, I'll try to...
Hello everyone,
I have MePo 1.9 installed and some times when I resume from a sleep state, MEPo crashes. I have attached my logs...
Like I said, I haven't got a working MP + TV Server, so I can't even try to reproduce.
Like I said, I haven't got a working MP + TV Server, so I can't even try to reproduce.
I've seen this problem from time to time, tonight it happens consistently. MePo 1.9.0 using DefaultWide, Win8.1, on some occasions...
Nach längerer Zeit (u.a. Urlaub) finde ich die Muße, das (Zwischen-)Ergebnis zu präsentieren:
Habe MySQL separat neu in der Version 5.6 neu installiert. Die Datenbank hatte ich zuvor gesichert.
Die Server-Config von MediaPortal konnte ich noch starten und einen Export machen. Danach MediaPortal Client und Server in der vom...
Nach längerer Zeit (u.a. Urlaub) finde ich die Muße, das (Zwischen-)Ergebnis zu präsentieren:
Habe MySQL separat neu in der...
Hallo!
Ich habe MediaPortal 1.9 auf eine bestehende 1.8 installiert. Dabei habe ich die Option des Upgrades von MySQL von 5.1 auf...
I have been using MP only for two months, but I encountered this effect recently. I first noticed it with a high-definition TV programme broadcast on DVB-T2 in the UK, and then I noticed it with a DVD box set.
In my case this effect is caused by the programme source having a multi-channel soundtrack, but the HTPC having only stereo...
I have been using MP only for two months, but I encountered this effect recently. I first noticed it with a high-definition TV...
IS there some magic way of cranking up the volume on videos. It seems every vid I play is always quiet and i need to crank up the...
No problem. :)
The program.ibd gets created (even with the row_format part) but it is missing the .frm file. And I cant see the table in the MySQL workbench. I think I will give up for today. ;)
No problem. :)
The program.ibd gets created (even with the row_format part) but it is missing the .frm file. And I cant see the...
Hello!
I 'accidently' deleted a table from mptvdb (MySQL). Is it possible to restore it (without content) or does there only help a...
It does. ;)
Move your mouse over the bottom area of my post and you should see the icons. The medal one is the thanks one.
It does. ;)
Move your mouse over the bottom area of my post and you should see the icons. The medal one is the thanks one.
Unfortunately, everything doesn't start.
If i try the MP configuration APP, it just don't start too
I have the StreamedMP skin...
I had that issue again this morning. My PC badly crashed last night, I'm thinking my ASUS motherboard is acting up.
I flashed the latest firmware on my Unicam Deltacam Twin and run DVBCineConfig to fix it.
Now it's all working fine again. Let's see how long it lasts.
I had that issue again this morning. My PC badly crashed last night, I'm thinking my ASUS motherboard is acting up.
I flashed the...
TV just stopped working.
I was getting some error message which could have been something like:
"Unable to find program or channel"...
I tried re-importing my settings but that did not work.
Though I can see the entries in my XML.
I tried re-importing my settings but that did not work.
Though I can see the entries in my XML.
Where is that EPG genre map being stored? Is it in some XML file? I'd like to restore following a new install without doing all the...
Hi folks,
I configured MediaPortal to access a FTP Server, but it fails to get a directory listing.
The problem can be reproduced in my network by accessing the FTP Server via a CLI. (note: the FTP Server is INSIDE my network and no Firewall that I am aware of is in between)
Example:
ftp -d [server]
Connected to [server].
220...
Hi folks,
I configured MediaPortal to access a FTP Server, but it fails to get a directory listing.
The problem can be reproduced...
Hi folks,
I configured MediaPortal to access a FTP Server, but it fails to get a directory listing.
The problem can be reproduced...
All seems well although only 20% of my shows matched tvdb entries after I checked that box - I was able to fix this by adding series name mappings for those series that didn't work. So, all is well and seems to be working very well now. Thanks!
All seems well although only 20% of my shows matched tvdb entries after I checked that box - I was able to fix this by adding...
I am not quite sure why my tv shows are naming the way they are. In my setting, I have them as shown in the screen shot - I would...
I'll see what I can do. It does not happen every time, so it is one of those hard to find bugs.
I have not looked at the log file myself, but maybe it is the last plug-in to load? Or perhaps what I think is a freeze is just that it is taking a really long time to load?
I'll see what I can do. It does not happen every time, so it is one of those hard to find bugs.
I have not looked at the log file...
Every once in a while, MePo freezes on startup requiring me to kill it using Task Manager. It just happened to me. Attached are...
Yes this fix works okay.
Yes this fix works okay.
Hello,
I am currently using Mediaportal 1.3.0 using it as a single seat (where I am using the PC as a TV Server and watch TV)...
Do I even need this? just reading up it looks like it's an apple service, I don't have any apple devices. Can I just delete the plugin or does MPExtended need it?
Do I even need this? just reading up it looks like it's an apple service, I don't have any apple devices. Can I just delete the...
I'm having an issue where Mediaportal will crash at the end of a track, I can play one, entire mp3 before this occurs. I can then...
That fixed it, thanks.
That fixed it, thanks.
I'm guessing this started when I upgraded to 1.8.0 yesterday, or perhaps 1.7.1 a month ago. I didn't get a conflict warning when...
i´ve made that Mediaportal Display 1.8 patch and now it works!
Thank you (y)
i´ve made that Mediaportal Display 1.8 patch and now it works!
Thank you (y)
Hello, after updating from Windows 7 Mediaportal 1.6 to 1.8 or 10.9 i disscovered a problem with playing music. Every time i start...
Yep, solved it... Thx
Yep, solved it... Thx
Hey guys,
I update my MediaPortal from 1.8 to 1.9 last week.
Yesterday I got a bluescreen while watching a movie and since then...
Thanks.
Thanks.
Where might I find a list of the default plug-ins? I have posted two threads regarding playback of specific Blu-ray disks that only...
Disable hardware acceleration:
- Open web browser
- Go to youtube
- Click on any video
- When the video plays, quick as you can right-click anywhere in the video, select Settings
- Uncheck "Enable hardware acceleration"
or use that brand-new tool which is able to disable/enable HA from your browsers:
- Original Post
- direct link to...
Disable hardware acceleration:
- Open web browser
- Go to youtube
- Click on any video
- When the video plays, quick as you can...
Hi professionals and expectant professionals,
Excuse me for the theme that has nothing to do with MediaPortal. But I'm with my...
HDD loading wont be affected at all, it will still be happening as much as before (EPG grabbing results are saved to DB).
What is different is that MP UI thread is not blocked by the long lasting SQL insert (10 seconds in my case) as the DB isolation behavior is changed:
http://msdn.microsoft.com/en-us/library/tcbchxcb(v=vs.110).aspx
HDD loading wont be affected at all, it will still be happening as much as before (EPG grabbing results are saved to DB).
What is...
Hello everyone,
I've recently updated to MP 1.6 Final + MySQL 5.6 and have sort of problem (as title says), my HTPC HDD is loading...
How can I forward and windowsmessage , or otherwise make MP start to play a specific file/channel ?
I can program another application to do that, or close MP, then launch with command line options (if some will do that)
the mision is simple: early in the morning, when my son wakes up, start one of his favorite movies or disnay...
How can I forward and windowsmessage , or otherwise make MP start to play a specific file/channel ?
I can program another...
How can I forward and windowsmessage , or otherwise make MP start to play a specific file/channel ?
I can program another...