Television (MyTV frontend and TV-Server) (307 Viewers)

Problems with the TV-Server or MyTV frontend? Post them in here.
MP1 MP2 Clear QAM Channel Scan (1 Viewer) DE
Here is how i understand your question: When you scan for channels you get a lot of channels. Some of them are FTA and others are protected. The option you chose (remove scrambled) removed all channels that have protection. That means it does not check if you can view it, i only looks at the flag. If you for instance have a smartcard...
Here is how i understand your question: When you scan for channels you get a lot of channels. Some of them are FTA and others are...
MediaPortal Version: 1.1 RC6 MediaPortal Skin: Blue Wide Windows Version: 7 x64 CPU Type: Phenom II X3 710 HDD: 2 TB Memory: 4...
Replies
1
Views
3K
MP1 MP2 No TV after Standby DE
i didnt had the exactly same prob: i could start a timeshift or recording via tvserver, but couldnt start preview or tv inside mp. if you get the recording in tvserver to start (check the recordings folder) than it could be an ati-driver prob. (but i am really not sure, because people say that this prob was solved from ati...
i didnt had the exactly same prob: i could start a timeshift or recording via tvserver, but couldnt start preview or tv inside mp...
MediaPortal Version: Mediaportal 1.1 RC3 MediaPortal Skin: StreamedMP Windows Version: Windows 7 64-Bit CPU Type: AMD 2x3000Mhz...
Replies
16
Views
4K
Hi Devs, hi community! How is it possible to switch between Audio Streams in DVB/S radio? Best regards Helios
Hi Devs, hi community! How is it possible to switch between Audio Streams in DVB/S radio? Best regards Helios
Hi Devs, hi community! How is it possible to switch between Audio Streams in DVB/S radio? Best regards Helios
Replies
0
Views
967
AW: Crash of TVservice in DVB-EPG Hello Alfred, i just found your thread while searching for tvserver crashes due to bad epg data. thats what i am bothering about. probably your problem is also related. try to disable epg grapping at all (uncheck epg grabbing while idle/ts) to narrow down the problem. cheers
AW: Crash of TVservice in DVB-EPG Hello Alfred, i just found your thread while searching for tvserver crashes due to bad epg...
MediaPortal Version: 1.1.0 RC5 MediaPortal Skin: Blue 3 4:3 Windows Version: XP Pro SP3 CPU Type: Intel Core Duo 6600, 2.4GHz...
Replies
1
Views
2K
Any news on this? I have the same prob (2003, ATI, good signal strength, mostly on HD channels)
Any news on this? I have the same prob (2003, ATI, good signal strength, mostly on HD channels)
Hello there... I don't know how to explain the problem exactly. This is why I added a sample-video. When I'm playing HDTV then...
Replies
13
Views
3K
MP1 MP2 Radio = No Sound??? DE
Cheers, I'll stick with ffdshow for now then. I haven't messed about with different codecs up to now, but now that I'm a bit more familiar with MP, I might play about with them.
Cheers, I'll stick with ffdshow for now then. I haven't messed about with different codecs up to now, but now that I'm a bit...
MediaPortal Version: 1.0.2 MediaPortal Skin: 1.0.2 Windows Version: Vista Home Premium SP1 After about 6 months of playing with...
Replies
18
Views
2K
MP1 MP2 Stream to VLC DE
Maybe those links could help you: https://forum.team-mediaportal.com/tv-server-plugins-294/my-small-contribution-i-call-streamtv-50470/ MEDIAPORTAL - free media center - MP-TvViewer
Maybe those links could help you...
Hi Is it possible to stream from a server (Single seat) to another PC/Laptop, into VLC? I dont want to be able to change...
Replies
2
Views
3K
MediaPortal Version: 1.1.0.0 RC 6 Windows Version: XP TV Card: Hauppauge WinTV HVR-1300 Can somebody explain why the TV plugin (client) does NOT work on the machine where the TV-Server is installed, while it works on another machine in the same LAN (not concurrently of course)...? On the local machine it won't even show the...
MediaPortal Version: 1.1.0.0 RC 6 Windows Version: XP TV Card: Hauppauge WinTV HVR-1300 Can somebody explain why the TV plugin...
MediaPortal Version: 1.1.0.0 RC 6 Windows Version: XP TV Card: Hauppauge WinTV HVR-1300 Can somebody explain why the TV plugin...
Replies
0
Views
804
Hmmm - just did a bit of testing and it seems that my DVB-S tuner (Hauppauge HVR3000) always reports 100% signal quality and strength whatever channel I tune to (even the Eurobird ones that are hardly watchable). This is from looking in the tvserver logs, but presumably those figures just come from the card's BDA driver. Oh well...
Hmmm - just did a bit of testing and it seems that my DVB-S tuner (Hauppauge HVR3000) always reports 100% signal quality and...
Not really a MediaPortal question, but this seemed as good a place as any to ask... I'm using DVB-S from Astra 28.2E, which is...
Replies
5
Views
5K
Hi, I was having some problems with my TV-channels so I decided to do a quick and dirty reinstall that can do the job untill 1.1.0 Final comes out. But I am missing some channels from the default scan for my DVB-T tower, my Digital TV-box can find 36 channels on a complete scan, while my Mediaportal TV server can only locate 22. Is...
Hi, I was having some problems with my TV-channels so I decided to do a quick and dirty reinstall that can do the job untill 1.1.0...
Hi, I was having some problems with my TV-channels so I decided to do a quick and dirty reinstall that can do the job untill 1.1.0...
Replies
0
Views
1K
Hi. A fact very annoying of Mediaportal is the unability to record tv until the user manually creates the folder "recordings", or enter on the config panel and manually select an existent folder for the recordings. I recently upgraded my mediaportal, i forgot to make this action... and i lost the match of my favorite team on...
Hi. A fact very annoying of Mediaportal is the unability to record tv until the user manually creates the folder "recordings", or...
Hi. A fact very annoying of Mediaportal is the unability to record tv until the user manually creates the folder "recordings", or...
Replies
0
Views
920
MP1 MP2 TV Guide doesn't work! (1 Viewer) DE
Hi, Nice that it was only system date & thx for telling back :) Regards Roy
Hi, Nice that it was only system date & thx for telling back :) Regards Roy
Hi! I hope, somebody can help! TV Guide insn't working here, please take a look at the screenshot! EPG-Grabber is working fine...
Replies
8
Views
5K
MediaPortal Version: 1.1.0 RC4 MediaPortal Skin: StreamedMP 1.0.0.1303 Windows Version: Windows 7 x64 CPU Type: Intel Core 2 Duo E8400 @ 3.00 GHz HDD: Kingston SSDNow V-Series 64GB Memory: G.Skill DIMM Kit 4GB PC2-8000U CL5 DDR2-1000 Motherboard: ASUS Rampage Formula Video Card: ATI HD5750 Video Card Driver: Catalyst 10.6 &...
MediaPortal Version: 1.1.0 RC4 MediaPortal Skin: StreamedMP 1.0.0.1303 Windows Version: Windows 7 x64 CPU Type: Intel Core 2 Duo...
MediaPortal Version: 1.1.0 RC4 MediaPortal Skin: StreamedMP 1.0.0.1303 Windows Version: Windows 7 x64 CPU Type: Intel Core 2 Duo...
Replies
0
Views
960
Especially in digital TV the moving unsharpness can be a sideffect of the coding (not the decoding). Of course I haven't seen your specific setting, but if it's not too unsharp, it might be normal. Cheers henning
Especially in digital TV the moving unsharpness can be a sideffect of the coding (not the decoding). Of course I haven't seen your...
Hi All, I'm using SAF5.00 with PDVD10 as HDTV codec. Graphics card: Geforce 9600GT This runs smooth (finally). But with...
Replies
1
Views
1K
MP1 MP2 IPTV - Australian DE
MediaPortal Version: 1.1.0 RC4 MediaPortal Skin: Blue3 Windows Version: XP SP3 CPU Type: AMD Athlon 2.8 HDD: SATA 1 TB Memory: 2 GB DDR3 Motherboard: MSI Video Card: NVIDIA GeForce 5500 Video Card Driver: Sound Card: Onboard Sound Card AC3: Onboard Sound Card Driver: 1. TV Card: Winfast 1. TV Card Type: HD 1. TV Card...
MediaPortal Version: 1.1.0 RC4 MediaPortal Skin: Blue3 Windows Version: XP SP3 CPU Type: AMD Athlon 2.8 HDD: SATA 1 TB Memory...
MediaPortal Version: 1.1.0 RC4 MediaPortal Skin: Blue3 Windows Version: XP SP3 CPU Type: AMD Athlon 2.8 HDD: SATA 1 TB Memory...
Replies
0
Views
1K
Unfortunately not all tv cards report accurate signal level. I will suggest you to turn on this setting "Don't drop discontinued packet in tsreader" in tv client configuration. You should see less stuttering (probably you will see video corruption) if it's a signal problem.
Unfortunately not all tv cards report accurate signal level. I will suggest you to turn on this setting "Don't drop discontinued...
MediaPortal Version: 1.1.0 RC 1 MediaPortal Skin: Streamed MP Windows Version: Windows 7 Ultimate CPU Type: AMD Phenon 8450...
Replies
9
Views
2K
Thanks a lot Rekenar! I´ve been looking for this idea, but I´ve to change all the TVClients, and I have almost 5 MediaPortals, so it would be a pain! :oops: Finally, I´ve discovered, that if I enter the other TVServer name on the HTPC TVServer, it starts to work inmediatly, without installing the TVServer client. So, I can...
Thanks a lot Rekenar! I´ve been looking for this idea, but I´ve to change all the TVClients, and I have almost 5 MediaPortals, so...
MediaPortal Version: 1.0.0 RC1 Windows Version: Windows XP Sp2 Hi everybody. I´m a really happy user of MediaPortal since...
Replies
2
Views
1K
Try to change network provider (Its placed in TVCard properties in TVServer Configuration)
Try to change network provider (Its placed in TVCard properties in TVServer Configuration)
Hi, after I updated to RC3 I faced a new problem: If I start MyTV directly with a HD channel (ARD HD, ZDF HD, Arte HD) I get an...
Replies
1
Views
2K
Hello MP People, Decided to replace my current MP Clients (2 of them, using a MP Client/TV Server setup) as both clients could not play 720p video without audio sync issues, tried every fix I could find but after imaging a client and putting the image on a higher spec PC it was pretty conclusive that the two clients did not have...
Hello MP People, Decided to replace my current MP Clients (2 of them, using a MP Client/TV Server setup) as both clients could...
Hello MP People, Decided to replace my current MP Clients (2 of them, using a MP Client/TV Server setup) as both clients could...
Replies
0
Views
2K
MediaPortal Version: 1.0.4. 23908 MediaPortal Skin: BluTwo 16:9 Windows Version: Windows XP SP2 CPU Type: Intel Core Due Duo E6750 HDD: Samsung HD403LJ SpinPoint T166 - 400Gb + Maxtor Dmax10 160gb Sata2 + 1TB WDC Memory: OCZ DDR2 PC2-6400 Gold XTC Dual Channel - 2GB (1GBx2) Motherboard: Asus P5KC Video Card: Asus 8500GT Video...
MediaPortal Version: 1.0.4. 23908 MediaPortal Skin: BluTwo 16:9 Windows Version: Windows XP SP2 CPU Type: Intel Core Due Duo...
MediaPortal Version: 1.0.4. 23908 MediaPortal Skin: BluTwo 16:9 Windows Version: Windows XP SP2 CPU Type: Intel Core Due Duo...
Replies
0
Views
793
MediaPortal Version: 1.1.0 RC4 MediaPortal Skin: Maya Windows Version: Win7 Ultimate 32bit CPU Type: Intel Core Duo Quad HDD: Samsung 300GB Memory: 4GB Giel Motherboard: Gigabute P43-DS3 Video Card: Asus 9500GT 1GB Video Card Driver: nVidia v185 Sound Card: Asus Xonar D2X Sound Card AC3: SPDIF Optical out Sound Card Driver...
MediaPortal Version: 1.1.0 RC4 MediaPortal Skin: Maya Windows Version: Win7 Ultimate 32bit CPU Type: Intel Core Duo Quad HDD...
MediaPortal Version: 1.1.0 RC4 MediaPortal Skin: Maya Windows Version: Win7 Ultimate 32bit CPU Type: Intel Core Duo Quad HDD...
Replies
0
Views
1K
Thanks for all your help Tompa. Given the limited level of response I assume that this is how MP is meant to work. However, I can't really see the point of this design this seems to significantly dilute the value of timeshift, i.e. it only works for the current show while you are watching it. So if I want to check another TV show...
Thanks for all your help Tompa. Given the limited level of response I assume that this is how MP is meant to work. However, I...
I have a system with 6 TV tuners and I am wondering if it possible to have a number of tuners ‘tuned’ to different channels with...
Replies
4
Views
1K
AW: Possibility to decrease buffer time for faster zapping You are only able to setup 0,1,2,3,4 seconds. 0.5 or 1.5 and so on will not be stored. Only full seconds.
AW: Possibility to decrease buffer time for faster zapping You are only able to setup 0,1,2,3,4 seconds. 0.5 or 1.5 and so on will...
As written in the headline I wanted to know, if there's a possibilily to decrease the buffer time to provide faster zapping. With...
Replies
3
Views
2K
Smartass :P
Smartass :P
Evening All, One thing that is irking me with MP is the way it behaves when you start recording a show, begin watching it from...
Replies
2
Views
905
MP1 MP2 Recorded TV location? (1 Viewer) DE
It's right. Thank you ;)
It's right. Thank you ;)
Hello Well the question is simple, where does TV-Server save the recorded TV files??? :D In the settings the default folder...
Replies
2
Views
5K
MP1 MP2 supported card for mptv (1 Viewer) DE
ohhhhh i see thx for the info funkstar sort of new at this. thx again
ohhhhh i see thx for the info funkstar sort of new at this. thx again
i would like to ask if the following card is supported by mediaportal Leadtek - We make dreams a reality i checked the wiki...
Replies
5
Views
1K
J
Tried ms sql and it took approx. 35 sec for SQL service to start. My SQL takes more than 90 sec to start. Both only after restart. After resume SQL start in 6 sec. I have resinstalled everything but nothing works. In the eventlogs it states that the sql service crashed during startup and therefore could not start. But... it does...
Tried ms sql and it took approx. 35 sec for SQL service to start. My SQL takes more than 90 sec to start. Both only after restart...
MediaPortal Version: 1.1.0 rc4 MediaPortal Skin: Maya Windows Version: XP PRO MCE sp3 CPU Type: 3.0 ghz HDD: samsung total 3,3...
2
Replies
13
Views
3K
joostzilla
J
You have a really high end (260) video card and I'll assume the 7800 is for the component out to your Mit RPTV? I am close on having decent images - sometimes I get dropped frames listed in the logs and other times using <shift><1> I see horribly irregular graph lines. I am surprised your 260 is leaving you with anything but...
You have a really high end (260) video card and I'll assume the 7800 is for the component out to your Mit RPTV? I am close on...
MediaPortal Version: 1.1.0 RC4 MediaPortal Skin: Maya Windows Version: 7 Pro x64 CPU Type: AMD x2 5000+ HDD: WD 640 GB 7200RPM...
Replies
5
Views
2K
I also had this problem, I could hear audio but no video and was pulling my hair out trying to resolve it. Anyway, checked what I had installed - SAF 4 Final - decided what did I have to lose, uninstalled SAF and installed CCCP codec pack, and now video and audio is working fine and I can start watching the World Cup :D Before this...
I also had this problem, I could hear audio but no video and was pulling my hair out trying to resolve it. Anyway, checked what...
Running rc3 everything is picked up and finds tuner finds channels in preview sound is there but video is a gray screen in...
Replies
2
Views
1K
MediaPortal Version: 1.1.0 RC4 MediaPortal Skin: Blue Windows Version: Windows XP CPU Type: ATOM 330 Hello! I've got a very common question: Did anybody know if it is possible to close MP-Frontend (WM_CLOSE) instead of activating the screen saver? Currently I have two children - so far so good ;)) But sometimes they...
MediaPortal Version: 1.1.0 RC4 MediaPortal Skin: Blue Windows Version: Windows XP CPU Type: ATOM 330 Hello! I've got a very...
MediaPortal Version: 1.1.0 RC4 MediaPortal Skin: Blue Windows Version: Windows XP CPU Type: ATOM 330 Hello! I've got a very...
Replies
0
Views
1K
Top Bottom