AW: need some info about the EPG tab (tv server config)
I think the options are self-explaining: grabbing while idle will always grab the EPG (depending on the time interval chosen), grabbing while timeshifting/recording will only grab during timeshift or recording ;)
AW: need some info about the EPG tab (tv server config)
I think the options are self-explaining: grabbing while idle will always...
MediaPortal Version: MP 1.1 final
MediaPortal Skin: Blue3 Wide
Windows Version: Windows 7 (since 07-18-2010)
CPU Type: Intel...
MediaPortal Version: MP 1.1.0 stable
MediaPortal Skin: StreamedMP last version
Windows Version: Windows 7 Home Premium 64 bits
CPU Type: ATHLON II X2 250 3GHZ AM3
HDD: SEAGATE BARRACUDA 1 TB SATA2
Memory: 2 X 2 KINGSTON DDR2 800
Motherboard: GIGABYTE GA-MA785GM-US2H
Video Card: ONBOARD ATI HD 4200
Video Card Driver: LASTEST C.C.C...
MediaPortal Version: MP 1.1.0 stable
MediaPortal Skin: StreamedMP last version
Windows Version: Windows 7 Home Premium 64 bits
CPU...
MediaPortal Version: MP 1.1.0 stable
MediaPortal Skin: StreamedMP last version
Windows Version: Windows 7 Home Premium 64 bits
CPU...
In IRSS, under the server config, there is the option (under the MCE Remote config) that allows you to disable automatic button handling.
this will disable windows' default handling of certain buttons (mainly up/down/left/right/volume/etc).
Then enable the remote using the MP plugin for IRSS and disable it everywhere else inside the...
In IRSS, under the server config, there is the option (under the MCE Remote config) that allows you to disable automatic button...
MediaPortal Version: 1.1.0 Final
MediaPortal Skin: StreamedMP
Windows Version: 7
CPU Type:
HDD:
Memory:
Motherboard:
Video...
Hi!
WMP, kmplayer or even VLC can stream nearly every format/container through http (avi, mkv, mp3, ogg, ...). But in MP this isn't possible. Does anybody have an idea?
I would like to stream mkv through http.
Stefan
Hi!
WMP, kmplayer or even VLC can stream nearly every format/container through http (avi, mkv, mp3, ogg, ...). But in MP this...
Hi!
WMP, kmplayer or even VLC can stream nearly every format/container through http (avi, mkv, mp3, ogg, ...). But in MP this...
Hi,
Thanks for your respond!
With the correct settings, it hasn't happened in the Xfactor skin (yet).
I also think the Xfactor skin looks a lot better.
this is why I'll focus on this skin for now.
You could always try Xfactor, maybe it will work for you to.
When any other problems occur I will post it again.
Regards
Hi,
Thanks for your respond!
With the correct settings, it hasn't happened in the Xfactor skin (yet).
I also think the Xfactor...
MediaPortal Version: 1.1.0.0 Final
MediaPortal Skin: Xfactor
Windows Version: Windows 7
CPU Type: Intel Q6600 2.4GHz
HDD: Samsung...
I found point 2 seems to launch the program, but for some reason program don't work. Maybe it is linked with new security system that prevents services to create any windows?
I found point 2 seems to launch the program, but for some reason program don't work. Maybe it is linked with new security system...
Maybe i don't know how to configure that one, but i want to do this:
(by grabbing EPG i mean launching command set in...
Hello everyone,
I have got a problem with my MediaPortal installation:
It tells me that it's recording something, but it isn't. As of this, however, i'm not able to view any channels other than FTA.
When I take a look at the 'current recordings', it says that it's recording on a channel (SBS 6, in this case), but i can't stop MP...
Hello everyone,
I have got a problem with my MediaPortal installation:
It tells me that it's recording something, but it isn't...
Hello everyone,
I have got a problem with my MediaPortal installation:
It tells me that it's recording something, but it isn't...
Hi, I have exact the same issue here. Can you decribe what you did in the manager?
I'm not really familiar whith this..
Thanks in advance!
Regards,
Wijnand
Hi, I have exact the same issue here. Can you decribe what you did in the manager?
I'm not really familiar whith this..
Thanks in...
i don't know if this is a bug or by desing.
I recently had to replace my corrupted driver for TT S2 3200. Before that i backed up...
Greeting Rek! Thanks for the reply. I am about to set up a centralized database today. I had feared as much about the tuner card. I have a REALLY nice Digital Video Capture card with 4 separate HDMI inputs that cost me alot and was hoping to use it. Windows & works well with it, but there is no way to display my DVC card in MP =(...
Greeting Rek! Thanks for the reply. I am about to set up a centralized database today. I had feared as much about the tuner card. I...
Hi and thank you. That actually improved the picture quality a bit!
However, what made the big difference was the removal of an antenna amplifier that was connected. I needed it for the old card that I threw away but I guess my new Hauppauge board didn't like it really. Now picture quality is even a bit better in MP than direct to...
Hi and thank you. That actually improved the picture quality a bit!
However, what made the big difference was the removal of an...
MediaPortal Version: 1.0.2
MediaPortal Skin: Default skin
Windows Version: Windows XP Professional Version 2002 Service Pack 3...
MediaPortal Version: 1.1.0
MediaPortal Skin: Standard
Windows Version: XP sp3
CPU Type: Pentium D 2.8
HDD: iTB seagate
Memory: 1 GB
Motherboard: Intel D945PVS
Video Card: Giganyte Nvidia 6600LE
Video Card Driver: Gigabyte original
Sound Card: On Board
Sound Card AC3: On board
Sound Card Driver: Realtek
1. TV Card...
MediaPortal Version: 1.1.0
MediaPortal Skin: Standard
Windows Version: XP sp3
CPU Type: Pentium D 2.8
HDD: iTB seagate
Memory...
MediaPortal Version: 1.1.0
MediaPortal Skin: Standard
Windows Version: XP sp3
CPU Type: Pentium D 2.8
HDD: iTB seagate
Memory...
Thanks J
Yes it works if I go to device and hit the power toggle. So it looks like when Power secheduler turns off the HTPC, the remote still thinks its on and so sdoesn't send the power toggle.
If I could work out how to send a PC shift key rather than the power toggle each time I'd have the problem beaten as shift would do...
Thanks J
Yes it works if I go to device and hit the power toggle. So it looks like when Power secheduler turns off the HTPC, the...
I am still having issues. I am using a Logitech Harmony 515 remote. I have power scheduler enabled to make the system sleep after 5...
This is in the maintained plugin section (IRSS = IR Server Suite)
IR Server Suite (IRSS) - MediaPortal Forum
This is a must-have util for any remote-driven PC anyways, you'll find 100 more uses for it, I am sure.
This is in the maintained plugin section (IRSS = IR Server Suite)
IR Server Suite (IRSS) - MediaPortal Forum
This is a must-have...
I used to run v 0.2.3.0 and then finally updated to 1.1.0.0 and have now run into a problem. My screensaver is set to turn off the...
I intend to use this for playing stored videos, DVDs , Music and TV so that won't work for me. Also my power toggle works both ways so I still have an issue with it turning off if I program an extra power step.
The remote works fine if I just leave the unit on. It just seems to have a problem wakig up the box if I use the watch TV...
I intend to use this for playing stored videos, DVDs , Music and TV so that won't work for me. Also my power toggle works both ways...
MediaPortal Version: 1.1.0
MediaPortal Skin: Standard
Windows Version: XP
CPU Type: Pentium d 2.8
HDD: 1TB seagate
Memory: 1gb...
I don't know how to change the name, but rather than setting the start time 5 minutes early, why not use the pre-record time instead. The name issue may resolve itself then.
I don't know how to change the name, but rather than setting the start time 5 minutes early, why not use the pre-record time...
Hi,
When I schedule a show it sometimes uses the name of the show before it.
e.g. I set my recordings to start 5 mins before...
AW: Remote Control
Yeah, I think your right, the 650 is the better choice. Before I didn't think about the fact that the 300 doesn't come with a display. The 650 is able to control 5 devices. If this is sufficient for you, you should be happy with it.
AW: Remote Control
Yeah, I think your right, the 650 is the better choice. Before I didn't think about the fact that the 300...
Hi guys,
I recently built a second MP for my brand new 50" Plasma TV in the family room.. Anyways... Upstairs I have a great...
Hello Everybody,
I have a question concerning the LastFm Plugin. If I want to ban a song I have to right-click on the Menu then appears a Dialogbox with the second option"Ban". But if I'm selecting this option I only Can ban the titles in the Playlist, not the current song oO Is there another option to ban the current song...
Hello Everybody,
I have a question concerning the LastFm Plugin. If I want to ban a song I have to right-click on the Menu then...
Hello Everybody,
I have a question concerning the LastFm Plugin. If I want to ban a song I have to right-click on the Menu then...
OK
I think I have solved it...I have incresed the TV-Server priority to High and changed the priority of my two TV cards (both nova-s) I think one card is generally being used..Maybe some one can elaborate if I am going down the right track with this.
Thanks
OK
I think I have solved it...I have incresed the TV-Server priority to High and changed the priority of my two TV cards (both...
Hi
When I change channel using the next channel, previous channel controls or the EPG, an error Can't play live2-0.ts.tsbuffer...
I ended up turning off scroll wheel all together for media portal. It sucks because scrolling through lists was so much easier with the scroll wheel but unintentional big step forwards and backwards were killing the experience...
I ended up turning off scroll wheel all together for media portal. It sucks because scrolling through lists was so much easier...
I posted in another part of this forum - this is a dup post hoping for help...
I have a Philips Pronto Professional TSU9400 with...