Having trouble installing or configuring MediaPortal?
you may also want to check out the latest versions of maya and fidelity skins.
you may also want to check out the latest versions of maya and fidelity skins.
I'm getting ready to build-up a new MediaPortal box. This will be my 3rd one and my first dual-core. My brother got my old one and...
I have a perfect working graph in graphedit, but how do i use it in Mediaportal Rc6
/Sebastian
I have a perfect working graph in graphedit, but how do i use it in Mediaportal Rc6
/Sebastian
Hi,
Executive summary: While attempting to setup my PCTV 100e, I might have found a bug in MP routines to create a graph.
I'm...
Hi Ray! ;)
Just did a 'minimal' uninstall (first option), rebooted and the installer still gives a fresh install as the only option stating that 1.1.0 RC6 is detected.
I went on, selected to watch tv, advanced installation and selected dedicated tv-server (master) since the client was already installed. MePo starts now but I have...
Hi Ray! ;)
Just did a 'minimal' uninstall (first option), rebooted and the installer still gives a fresh install as the only...
MediaPortal Version: 1.1 RC5
MediaPortal Skin: Blue3
Windows Version: Xp sp3 + hotfixes
CPU Type: AMD Athlon 64 X2 5050E
HDD...
AFAIK, SQL Server 2008 is using dynamic TCP port. You need to configure it for fixed value.
Simone
AFAIK, SQL Server 2008 is using dynamic TCP port. You need to configure it for fixed value.
Simone
MediaPortal Version: 1.1 RC3
MediaPortal Skin: Default Blue Wide
Windows Version: 7
CPU Type: AMD Athlon(tm) 64 X2 Dual Core...
Hi,
You should have no problems at all. I just installed RC 6 on Windows 7 Ultimate. Fresh install on system, I installed all latest drivers for the MB, graphics, sound, TV card, etc. After that I installed the latest K-Lite codec pack and installed MediaPortal, with all normal settings. It ran straight out of the box no problems no...
Hi,
You should have no problems at all. I just installed RC 6 on Windows 7 Ultimate. Fresh install on system, I installed all...
I am currently running Vista and MP 1.0.2. When MP 1.1.0 is released i am planning to redo my install with win7.
have searched...
I read about this - did you set MP to be on top always??? If yes, try to disable this...
I read about this - did you set MP to be on top always??? If yes, try to disable this...
MediaPortal Version: 1.1.0 RC4
MediaPortal Skin: StreamedMP-1.2.0.1410
Windows Version: Windows 7 x64
CPU Type: DualCore Intel...
Hi, I didnt have time to install earlier..
Today i installed, but it still doesnt work.. now when i try to search the channels it show a message.. i'll attach the screen.
Tks !
Hi, I didnt have time to install earlier..
Today i installed, but it still doesnt work.. now when i try to search the channels it...
MediaPortal Version: Stable Release V1.0.2
MediaPortal Skin: Black Glass Nova
Windows Version: Windows XP SP3 Professional
CPU...
I think I found something interesting that may help those who will try to help me...:D:D
As I said in my first post, my CVBS input is correctly shown when I'm using Dscaler.
I just opened Dscaler again and checked the "Sources" menu.
There I find two item pointing to my TV card:
1) Medion TV-Tuner 7134 MK2/3
2) 713x BDA Anal,og...
I think I found something interesting that may help those who will try to help me...:D:D
As I said in my first post, my CVBS input...
Hi, I'm a very enthusiatic new user of MediaPortal (24 hours) and very old IT person (39 years).
Setting up MediaPortal was just...
AW: MediaPortal and Logitech Harmony One
At first you have configure the Harmony One shown as above (post two)
Then configure the remote in MP as an MCE-Remote.
is built in the Harmony Software (see post two)
There are a lot of posts with these content in the Forum.
You have to disable WMC and use the MP-Tray
---
I found this ...
AW: MediaPortal and Logitech Harmony One
At first you have configure the Harmony One shown as above (post two)
Then configure the...
MediaPortal Version: MediaPortal 1.1.0 RC4
MediaPortal Skin: StreamedMP
Windows Version: Windows 7 Ultimate x64
CPU Type: Intel...
Have just upgraded to 1.1 RC5 and now have the same problem with standby. (It was OK with RC4). I have server & client on separate machines. In the client log (see below), it says 'detected a multiseat setup - using local methods' then 3 lines later
it says 'shutdown locally set to false'. I looked on the server with TCPview, and it's...
Have just upgraded to 1.1 RC5 and now have the same problem with standby. (It was OK with RC4). I have server & client on separate...
MediaPortal Version: 1.1 RC1
MediaPortal Skin: Blue3
Windows Version: XP SP3
CPU Type: AMD Athlon 2.8
HDD: SATA 1 TB
Memory: 2...
kk, thanks :)
I have installed much of it already, but I will give it a try.
kk, thanks :)
I have installed much of it already, but I will give it a try.
ARGH!
I have been struggling with MP for a while, and decided to make a complete uninstall to make sure I started from scratch...
Hi!
How to reset "input device mapping"? I made my configuration strange :)
Thanks.
Hi!
How to reset "input device mapping"? I made my configuration strange :)
Thanks.
Hi!
How to reset "input device mapping"? I made my configuration strange :)
Thanks.
great :)
great :)
[b]MediaPortal Version[1.1 rc5]:
[b]MediaPortal Skin[all]:
[b]Windows Version[W7]:
[b]CPU Type[amd 64]:
[b]HDD[150g]...
I am running Windows 7 64 bit with the Hauppauge WinTV-HVR-2250.
The installer said everything loaded in and is installed, but when I double click on the TV-Server Configuration Icon I get these messages:
user is not associatedwith a trustedSQL server connection.
and
unable to connectto anyof the specified MySQL hosts...
I am running Windows 7 64 bit with the Hauppauge WinTV-HVR-2250.
The installer said everything loaded in and is installed, but...
I am running Windows 7 64 bit with the Hauppauge WinTV-HVR-2250.
The installer said everything loaded in and is installed, but...
Hi, you can disable it in MP Configuration. If I recall correctly, it is under 3rd party checks.
Hi, you can disable it in MP Configuration. If I recall correctly, it is under 3rd party checks.
I'm running a test on my laptop with Windows 7 and RC5 of Mediaportal. I am using USB-UIRT, Firefly remote and Event Ghost to...
well, I did the firmware update for my SSD, together with a sanitary erase. With that I did a fresh install of Win7. It seems the problem is gone now (drop of write speed).
It's unclear if it was the firmware update (unlikely, the last wasn't really old, but still no changelog released for the current one), or (more likely) the...
well, I did the firmware update for my SSD, together with a sanitary erase. With that I did a fresh install of Win7. It seems the...
Hi
Is there a way to set the Disk I/O Priority setting for TV Server and MediaPortal? I assumed this would be done by the e.g...
Hi
I have one sub folder per movie.
Sometimes multiple AVI files per folder.
Normally one MKV file per folder.
The file names are not properly formatted or cleaned up.
I always clean up the folder names to reflect the proper movie name.
When MP looks up movie info, it uses the file name.
How can I configure MP to use the...
Hi
I have one sub folder per movie.
Sometimes multiple AVI files per folder.
Normally one MKV file per folder.
The file names...
Hi
I have one sub folder per movie.
Sometimes multiple AVI files per folder.
Normally one MKV file per folder.
The file names...
I have a 30 sec delay also, cant for my life figure out the reason, I have disabled all plugins but still stalls.
2010-06-23 16:10:36.554767 [Debug][MPMain(1)]: Name : #StreamedMP.Example.Property Translation : Translated String
2010-06-23 16:10:37.053796 [Info.][FilterChecker(5)]: FilterChecker: Found quartz.dll from 2009-12-19...
I have a 30 sec delay also, cant for my life figure out the reason, I have disabled all plugins but still stalls.
2010-06-23...
I have latest version (1.0) and starting MP freezes either on "Initializing Input Devices" or "Starting plugins". Log is below...
I certainly get somewhat better results from ComSkip when the recording is complete, I also get much better processor/hard drive utilization (for whatever reasons).
It seems though, that if the chapter information is available it should be used. Why else bother to generate it dynamically? It seems to me that other media players are...
I certainly get somewhat better results from ComSkip when the recording is complete, I also get much better processor/hard drive...
MediaPortal Version: 1.1.0.0 RC4
MediaPortal Skin: Blue3Wide
Windows Version: XP Service Pack 3
CPU Type: Core 2 Duo 2.4Ghz...
MediaPortal Version: 1.0.2.0
MediaPortal Skin: Blue
Windows Version: Windows XP SP3 (Last Update) + .net Framework 3.5
CPU Type: AMD Athlon X2 240
HDD: Hitachi 1.5 TB
Memory: 2 GB
Motherboard: Biostar
Video Card: HD 4200
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: TechniSat SkyStar HD2...
MediaPortal Version: 1.0.2.0
MediaPortal Skin: Blue
Windows Version: Windows XP SP3 (Last Update) + .net Framework 3.5
CPU Type...
MediaPortal Version: 1.0.2.0
MediaPortal Skin: Blue
Windows Version: Windows XP SP3 (Last Update) + .net Framework 3.5
CPU Type...
I have the same issue too.
I'm using MP1.1 RC4
Is there an option to reduce the time before you get the message that a channel is coded ?
Thanks,
I have the same issue too.
I'm using MP1.1 RC4
Is there an option to reduce the time before you get the message that a channel...
Hi all, i'd like to know if there's somewhere in the mediaportal og tv-server settings, where you can change the amount of time...
Most TV-tuners comes with some kind of software to watch TV. These often have a signal indicator, which actually works, since the program is suited for the specific tv-card. At least that has been my experience with my last two tuners purchased.
Most TV-tuners comes with some kind of software to watch TV. These often have a signal indicator, which actually works, since the...
Hello been running a full home server and client system for a year with no hiccups and just did a complete over haul on the server...
Strange one here!
managed to fix my full signal problem yet still digital breakup problem but now a new problem has risen.
i run a multi seat system with a server running 2xDVBc technotrend c-1501 / 2x Technisat DVBs Skystar2 HD cards
now when i first boot my server and connect with a client with in 2-3 minutes of boot there...
Strange one here!
managed to fix my full signal problem yet still digital breakup problem but now a new problem has risen.
i...
Strange one here!
managed to fix my full signal problem yet still digital breakup problem but now a new problem has risen.
i...
I have Mediaportal 1.1 RC4 and encountered this problem. I am not sure if this has anything to do with it, but I had recently installed Divx, Quicktime, and VLC.
I fixed this problem by going to the TV Server configuration, and under manual control, starting timeshifting on a random channel. I opened up mediaportal and viewed this...
I have Mediaportal 1.1 RC4 and encountered this problem. I am not sure if this has anything to do with it, but I had recently...
TV-Server Version: 1.0.2
MediaPortal Version: 1.0.2
MediaPortal Skin: blue
Windows Version: XP SP3
CPU Type: AMD Athlon X2...
There is already a bug about this in mantis:
0002943: In TV Combinations, selecting a channel on the left list works only the first time - MediaPortal Bugtracker
There is already a bug about this in mantis:
0002943: In TV Combinations, selecting a channel on the left list works only the...
Having a few issues with rc4 TV server set up; for the most part it seems to be working fine with the exception of the tv channel...
Thanks for that, I will check it out.
Thanks for that, I will check it out.
Just a general question about mapping that despite a lot of reading, still don't really understand how it works. I am in the UK and...
Ok first there is no x64 version of mediaportal and there isnt a need for one, just install the regular version like normal.
After Mediaportal is installed get these plugins for what you want and install them
https://forum.team-mediaportal.com/my-tvseries-162/new-mediaportal-tvseries-v2-5-4-stable-release-01-jun-2010-a-77247/...
Ok first there is no x64 version of mediaportal and there isnt a need for one, just install the regular version like normal.
After...
I have just upgraded my HTPC to Win7 X64 and added an HD5570 video card.
Previously I was using WinXP and G35 and the following...
Is there any possibility to switch main monitor to idle mode in such situation?
Is there any possibility to switch main monitor to idle mode in such situation?
MediaPortal Version: 1.1 RC1
MediaPortal Skin: BlueWide
Windows Version: Win7 Home Premium 32bit
CPU Type: Athlon 4850EE
HDD...
UPDATE:
No worries, I fixed the problem!
I uninstalled the Nova-TD Tuner in Device Manager and rebooted. XP reinstalled the Tuner Device upon reboot and now both tuners work properly in TV-Server.
I dont know why uninstalling the tuner worked, because before I "reinstalled" and "Upgraded" the driver many times, which is basically...
UPDATE:
No worries, I fixed the problem!
I uninstalled the Nova-TD Tuner in Device Manager and rebooted. XP reinstalled the Tuner...
UPDATE:
No worries, I fixed the problem!
I uninstalled the Nova-TD Tuner in Device Manager and rebooted. XP reinstalled the Tuner...
I would try a clean install of MP 1.1.0 RC4.
I would try a clean install of MP 1.1.0 RC4.
MediaPortal Version: 1.0.2
MediaPortal Skin: StreamedMP
Windows Version: winXP SP3
Hi all,
I just installed mysql5 and...