Yeah, Chuck Lorre usually does that in all his series, it's called a vanity card. The complete collection of all his vanity cards can be found at Chuck Lorre Productions - Vanity Cards. Keep in mind some of them are pretty unintelligible... :P
Yeah, Chuck Lorre usually does that in all his series, it's called a vanity card. The complete collection of all his vanity cards...
Hi togeather,
i cutted the Series Two and a half men (TNT Series Germany) and discovered this single Frame at the End of the...
Hallo
I'm running Mediaportal + tv server 1.2.0 (beta),
I'm having to mediacenter with one tuner in each, now I'm trying to
make only one server (with MP) and a client (only MP), with to tuners.
The server is running MP well, I can se all channel an so on.
But on the client I cant get the channel list. Under My TV...
Hallo
I'm running Mediaportal + tv server 1.2.0 (beta),
I'm having to mediacenter with one tuner in each, now I'm trying to...
Hallo
I'm running Mediaportal + tv server 1.2.0 (beta),
I'm having to mediacenter with one tuner in each, now I'm trying to...
Whenever I try to play an MP3 file from a folder with lots of MP3s (say, about 2,000), MP takes a long time (about 2 minutes) to start playing it.
Playing more songs from the same folder occurs immediately, after the first one has been played.
I can see a lot of disk activity on the first play, so it looks as if MP is reading...
Whenever I try to play an MP3 file from a folder with lots of MP3s (say, about 2,000), MP takes a long time (about 2 minutes) to...
Whenever I try to play an MP3 file from a folder with lots of MP3s (say, about 2,000), MP takes a long time (about 2 minutes) to...
Hi dabotsonline, did you manage to get access to Brightcove streamable Flash format in the end? A thread over here about trying to get a brightcove stream into the online-videos plugin, but hitting the same problems you described.
Hi dabotsonline, did you manage to get access to Brightcove streamable Flash format in the end? A thread over here about trying...
Hi everyone,
Just seen this plugin for Windows MCE - and was wondering if anyone was clever enough to make something similar for...
Hello Garry,
I just installed MP and I love it... unfortunately it doesn't work with my Adaptec AVC-3610 tuner so I was wondering if you are still making patches from the latest SVN releases, as I'd love to be able to run your patched version based on the 1.1.2 release.
Hello Garry,
I just installed MP and I love it... unfortunately it doesn't work with my Adaptec AVC-3610 tuner so I was wondering...
I have the Adaptec AVC-3610 (USB external dual analog tuner) working now. Once I do some more testing I'll submit a patch to the...
This sorted my issue - deleted all condig XML:thx: files from
C:\ProgramData\Team MediaPortal\MediaPortal on Windows 7, Configuration manager then opened with no errors
This sorted my issue - deleted all condig XML:thx: files from
C:\ProgramData\Team MediaPortal\MediaPortal on Windows 7...
Uninstalled, Rebooted, Reinstalled SAme error
even told it on the uninstall to do the FULL CLEAN removal.
any ideas?
See...
After I manually delete a recording file via windows explorer, it no longer appears in my TV Recordings list. It is like all the files listed in the database are checked for their existence before they are displayed.
As I have a large number of recordings, whenever I go to Recorded TV in the MP client it takes 10 seconds before...
After I manually delete a recording file via windows explorer, it no longer appears in my TV Recordings list. It is like all the...
After I manually delete a recording file via windows explorer, it no longer appears in my TV Recordings list. It is like all the...
I suppose the Bugtracker is just for bugs - all the development of MP2 is not logged here, many things are missing before it is even close to MP1 in functionality.
I suppose the Bugtracker is just for bugs - all the development of MP2 is not logged here, many things are missing before it is...
Hi Guys,
Is there any info when the betaversion of MP 1.2.0 comes? And can I check that information somewhere?
Grtz
As a UK resident I've been keeping my eye on this project. Some time last year it was re-branded as YouView and has just been delayed to (maybe) the end of this year. I can now access some general device guidelines:
http://www.youview.com/wp-content/themes/youview/_site_media/resources/Consumer_Device_Platform_Draft_A.pdf
It...
As a UK resident I've been keeping my eye on this project. Some time last year it was re-branded as YouView and has just been...
Don't know whether this has been mentioned before - Just doing some reading up on Project Canvas:
Homepage - projectcanvas.info...
In the end I uninstalled MePo and reinstalled which has resolved the issue, so something got messed up somewhere.
Before I did that I tried changing codecs, disable and enable MovingPictures, checked that MediaInfo for DVDs was unchecked, searched for any other MediaInfo.dll files and none helped but thanks for all the suggetsions...
In the end I uninstalled MePo and reinstalled which has resolved the issue, so something got messed up somewhere.
Before I did...
Hi All, I am new here so please be kind to me :) I am in the process of setting up MP on an Acer Revo R3610 - 4gb, 500gb, Win7...
Hey Joz,
I too am sorry your going. I tried XBMC a while back and was convinced it was superior to MP. It was quicker & smoother (as you mentioned), and I was very happy with the progress they were making with the PVR plugin(s). BUT, I was missing some important parts of my HTPC, bitstreaming and my NetFlix. Although XBMC has a...
Hey Joz,
I too am sorry your going. I tried XBMC a while back and was convinced it was superior to MP. It was quicker & smoother...
Hey all,
MediaPortal has served me very well over the last years but I'm leaving my trusty MP behind for daily usage and I am...
I have a new MP install and get this error message (Unable to Play:live2-0.ts.tsbuffer) when I try to view live tv. Card works in preview when setting channels up in tvserver config. But this happens everytime when running MP.
I have a new MP install and get this error message (Unable to Play:live2-0.ts.tsbuffer) when I try to view live tv. Card works in...
I have a new MP install and get this error message (Unable to Play:live2-0.ts.tsbuffer) when I try to view live tv. Card works in...
hello first post here and a total newb on the subject of media streaming.
i just downloaded and installed media portal on an older dell pc with a tv tuner card and my ultimate goal is to be able to not only stream live digital cable (not hd) broadcast over my lan to other tvs an pc's in the house to avoid paying $15 a month each...
hello first post here and a total newb on the subject of media streaming.
i just downloaded and installed media portal on an...
hello first post here and a total newb on the subject of media streaming.
i just downloaded and installed media portal on an...
Hi,
I have a strange Problem after reinstalling.
I installed Version 1.1.2 (upgraded from 1.0.2) and found that my WinLIRC Plugin is not working anymore in version 1.1.2
Therefore I switched to girder.
After learning the Commands for girder, the remote works fine in all the menus - except one.
When entering the TV Menu the...
Hi,
I have a strange Problem after reinstalling.
I installed Version 1.1.2 (upgraded from 1.0.2) and found that my WinLIRC...
Hi,
I have a strange Problem after reinstalling.
I installed Version 1.1.2 (upgraded from 1.0.2) and found that my WinLIRC...
One of the main problems trying to use MediaPortal in India is the lack of good EPG data.
The only viable method has been to use mc2xml (XMLTV) to grab the rather poor quality data from MSN India. This is the same data used by Windows Media Center.
Now the premier online TV Guide Service in India: What's On India has started...
One of the main problems trying to use MediaPortal in India is the lack of good EPG data.
The only viable method has been to use...
One of the main problems trying to use MediaPortal in India is the lack of good EPG data.
The only viable method has been to use...
Yes I would agree with disaster 123. Unless you only ever have 1 client launched, and you always shut down properly, then I wouldn't attempt this.
I tried this with my 2 clients which I always just suspend and it would frequently corrupt my databases so I just gave up in the end.
Yes I would agree with disaster 123. Unless you only ever have 1 client launched, and you always shut down properly, then I...
Hi,
Hope this is the right place.
I am wondering if you can edit where the Moving Pictures and MP TV Series database files...
If I can get access to it once I sort out uploading it to our ftp. If you upload it somewhere just drop me a PM (or post here if you don't mind it being public) and I will sort out the rest
Thanks, appreciate this is a pain but I don't have a DVB-T2 card (although I really would like one :cool:) and if we can get a sample which...
If I can get access to it once I sort out uploading it to our ftp. If you upload it somewhere just drop me a PM (or post here if...
Anyone know if the new DVBT2 standard here in Sweden Will work with FireDTV or any other cards?:o
I'm new to MediaPortal but have been using Comskip for years. Here's my comskip.ini - works OK for me in Sydney.
verbose=0
output_framearray=0
output_debugwindow=0
delete_logo_file=1
output_timing=0
detect_method=111 ;1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 32=aspect ratio, 64=silence
validate_silence=1...
I'm new to MediaPortal but have been using Comskip for years. Here's my comskip.ini - works OK for me in Sydney.
verbose=0...
Hi all,
I was hoping someone could post their working configuration ("ini" file) for Comskip. I have tried several...
These kind of guys are really funny. No, this noone can help you.
If a problem would exist that can be solved by just having the info: Video no Sound, don't you believe the devs would have put a final fix about that in the software?
Go and read how to post a support thread and do that first.
These kind of guys are really funny. No, this noone can help you.
If a problem would exist that can be solved by just having the...
help i have video but have no sound can u help me please:(:(:(
AW: Anyone running htpc / MP with a Gigabyte I-RAM
Just bought a iRam drive today. Still got some ddr ram modules around, so i will give it a try.
But i will use it as timeshift drive only. 4 GB isnt much space, but as fas as i understood it will provide
around 25 minutes hd timeshift. Thats enough for me.
And if it doesnt work out...
AW: Anyone running htpc / MP with a Gigabyte I-RAM
Just bought a iRam drive today. Still got some ddr ram modules around, so i...
Just wondering if anyone has there HTPC running with I-RAM , if so how do you find the results on bootup and speed of MP?
Thanks
Pedrone,
I use both LED Driver and LED Controller at the same time (three LEDs controlled via the COM port and 3 controlled via the USB keyboard lights). This gives me a really nice interface.
Both systems are easy to configure and work flawlessly.
Robbo100
Pedrone,
I use both LED Driver and LED Controller at the same time (three LEDs controlled via the COM port and 3 controlled via...
Hi all,
I have found interesting utility Slick Solutions - LEDSdriver which can control LEDs connected to serial port and e.g...
I am new to MP, but am enjoying it so far. I am having an issue with video (stored on HD) and DVD playback. I am using TMT 3 (MCE executable) on XP with SP3.
The issue I am having is every now and then the audio will drop. The video frame does not skip so it does not seem to be an issue with CPU (dual core 2.8, 1 gig ram). I...
I am new to MP, but am enjoying it so far. I am having an issue with video (stored on HD) and DVD playback. I am using TMT 3 (MCE...
I am new to MP, but am enjoying it so far. I am having an issue with video (stored on HD) and DVD playback. I am using TMT 3 (MCE...
Hi there,
You can't "download" SVN builds (ie EXE files to run).
You have to download the Source code (via SVN) and then compile it yourself.
There are instructions in the Wiki :)
J.
Hi there,
You can't "download" SVN builds (ie EXE files to run).
You have to download the Source code (via SVN) and then...
Hi all..
Just a general question...
How does 1.2.0 Alpha compare with 1.1.1 Final in terms of reliability and stability ?
thx