General talk regarding our HTPC-software MediaPortal 1 takes place here.
You'll often find the answer in our wiki :)
MediaPortal/Configuration/Plugins - MediaPortal Manual Documentation
You'll often find the answer in our wiki :)
MediaPortal/Configuration/Plugins - MediaPortal Manual Documentation
Folks,
How do I change the location of where various objects appear on menus? For instance I have a radio button in "plug ins"...
Hi, and welcome :)
As an alternative to Deamon tools, you can also use Virtual Clone Drive.
And yes... MP is impressive... I still learn new tricks it can do - and it is still being thought new tricks (by devs).
Hi, and welcome :)
As an alternative to Deamon tools, you can also use Virtual Clone Drive.
And yes... MP is impressive... I...
Hi
Just installed Media Portal (1.1.0) for the first time, and I wonder if it's possible to play .iso files? I have adde .iso as...
thank you to everyone who worked on version 1.1.0, i had been holding on to 0.2.3.0 since i discovered mp. and as an added bonus the mapping to my xp mce remote was fixed in win 7. thus i have ditched xp like yesterday and installed win 7 x64 on my htpc's. then bumped the memory up to 4GB in each. the greatest part is the skin I've...
thank you to everyone who worked on version 1.1.0, i had been holding on to 0.2.3.0 since i discovered mp. and as an added bonus...
thank you to everyone who worked on version 1.1.0, i had been holding on to 0.2.3.0 since i discovered mp. and as an added bonus...
My aim in asking was to get a small and leightweight media player that I can use around the house. I did find the iPimp plug in and got it sort of working on my Loox 520 - however, it is not really GF friendly. My MP setup streams really well to my HP laptop, so I have started to look at Netbooks as MP clients so I can have a small &...
My aim in asking was to get a small and leightweight media player that I can use around the house. I did find the iPimp plug in and...
HI
Was wondering if this is possible and if so, if you could point me in the general direction :)
I have an HTC Touch which...
System as Follows :--
Celaron 2.4 dual core
2Gb DDR800 ram
1TB hard drive
Gforce gt 220 1GB graphics card with HDMI output
Hauppauge hvr 3000 TV Card
ALL drivers are up to date.
I have installed media Portall as per instructions. When i launch media portal and start to watch tv i keep getting " unable to start timeshifting"...
System as Follows :--
Celaron 2.4 dual core
2Gb DDR800 ram
1TB hard drive
Gforce gt 220 1GB graphics card with HDMI output...
System as Follows :--
Celaron 2.4 dual core
2Gb DDR800 ram
1TB hard drive
Gforce gt 220 1GB graphics card with HDMI output...
I have one question, do you have changed your folders of the plugins e.g. moving pictures to a folder on your server ? I'm just asking because the thumbs folder of the client can get realy big (in my case about 2gb) and if you did change the paths could you say something about the performance?
I have one question, do you have changed your folders of the plugins e.g. moving pictures to a folder on your server ? I'm just...
Introduction
I wanted my MP frontend as quiet as possible. For this I wanted to remove as much as moving parts as possible.
The...
No broadband option will help me unfortunately as me broadband is off a RIM. I am stuck with ADSL1 and I can't see that changing especially with the election going the way it has. :(
I need to find a Satellite service that can work without the priority box that Foxtel and Austra offer. Select was the perfect option. I wonder how...
No broadband option will help me unfortunately as me broadband is off a RIM. I am stuck with ADSL1 and I can't see that changing...
Hi,
I've started this thread in the hope that there are some Australian SELECTV users that might like to share experiences with...
Three and a half weeks and the total bug count in the roadmap for the whole project for 1.1.1 stands at 11 with 7 complete.
That is damned impressive guys. Good work!
:)
Three and a half weeks and the total bug count in the roadmap for the whole project for 1.1.1 stands at 11 with 7 complete.
That...
Three and a half weeks and the total bug count in the roadmap for the whole project for 1.1.1 stands at 11 with 7 complete.
That...
As far as I know it is not supported.
I have the ATI dct card and love it. It is every bit as good as any cable box in terms of quality of picture. I would love it if mediaportal supported this card but it is unlikely, but I do hope they support the Ceton tuner.
Only problem with that card is that price...only one available now is...
As far as I know it is not supported.
I have the ATI dct card and love it. It is every bit as good as any cable box in terms of...
I have read many things about cable card tuners, mainly that they come in pre-configured machines and that supposedly an external...
The review included initially other three sw: Sesam TV, Gb-Pvr and Got All Media but they are rejected because not able to work properly on Windows 7.
the detail of score of MP and Xbmc was:
Music - MP 7,5 XBMC 8,5
Images - MP 7,5 XBMC 8,0
Tv - MP 8,0 XBMC N/A
Multimedia - MP 9.0 XBMC 8,5
Internet - MP 7.0 XBMC 8,0
The review included initially other three sw: Sesam TV, Gb-Pvr and Got All Media but they are rejected because not able to work...
I'm glad to update you about Pc professionale magazine review for current month.
The magazine has reviewed seven media center...
I also voted MP. XBMC is definitely more popular than MP, but the results are also somewhat skewed by Ars Technica being very US oriented where it is more difficult to integrate PVR functionality because of the pre-dominance of pay TV.
There is also the segment of the 'market' who don't really have an HTPC in their living room...
I also voted MP. XBMC is definitely more popular than MP, but the results are also somewhat skewed by Ars Technica being very US...
In case anyone is interested, there is currently a series of polls on people's home theater tech on ars technica. I'm surprised to...
Hi mate sorry no one has replied to you it's not had to drop a few links in a reply.
MediaPortal1_Development/SkinArchitecture - MediaPortal Manual Documentation
MediaPortal1_Development/PluginDevelopersGuide - MediaPortal Manual Documentation
Hi mate sorry no one has replied to you it's not had to drop a few links in a reply.
MediaPortal1_Development/SkinArchitecture -...
I have spent several months, on and off, attempting to develop a custom media center by way of VB.Net.
My aim has been to:
1...
How can I read all videos of a directory in a row without selecting them one by one?
My problem is that I have to play all my .avi videos one by one.
Thanks :thx:
How can I read all videos of a directory in a row without selecting them one by one?
My problem is that I have to play all my .avi...
How can I read all videos of a directory in a row without selecting them one by one?
My problem is that I have to play all my .avi...
Hi Guys
I have a little problem, and i hope you can help.
Moving pictures keeps track of all my files for me, but is there a possibility of making a viewable txt, xls etc. on the fly?
Which means that everytime i add a file in my folders for mediaportal, then the file gets updated with the new info.
When having files lying...
Hi Guys
I have a little problem, and i hope you can help.
Moving pictures keeps track of all my files for me, but is there a...
Hi Guys
I have a little problem, and i hope you can help.
Moving pictures keeps track of all my files for me, but is there a...
Hi!
I have managed to get my scrambled channels to work perfectly. But the unscrambled ones doesn't work!? And they are from the same provider.
I have a Twinhan Cad-CI tv card. That have worked in earlier versions of mp
Thanks beforehand!
I had the wrong frequencies!
So it is fixed :)
Hi!
I have managed to get my scrambled channels to work perfectly. But the unscrambled ones doesn't work!? And they are from the...
Hi!
I have managed to get my scrambled channels to work perfectly. But the unscrambled ones doesn't work!? And they are from the...
yes i run in fullscreen mode
yes i run in fullscreen mode
i using media portal 1.1.0 with vlc plugin to watch live tv, when channel start aero interface switching to basic with message...
Hi :)
Always nice to read positive feedback.
Hi :)
Always nice to read positive feedback.
Finally (last weekend) got around to installing 1.1.0 (from 1.0.2!), brand new, delete all the old stuff and clean install.
It...
AW: missed to save RC5 & RC6
well sometimes my hardware constellation ist a bit hmmm strange :D
and than i prefer to change between the different RC's or stable releases ...
till i got it stable again ...
@ the moment my favorite (since yesterday) is RC5 ...
brings more stability by switching between FTA and nFTA ...
:D ...
AW: missed to save RC5 & RC6
well sometimes my hardware constellation ist a bit hmmm strange :D
and than i prefer to change...
hi there ...
just that i have all versions ...
i just missed to save my RC5 and RC6 ..
and öhm - just deleted them ...
BUT...
Personally I have AnyDVD HD installed and I use EAC3TO to demux the video from the movie untouched and I can either extract the audio stream untouched or convert it to FLAC. I use BDSup2Jar to convert the forced subs (subtitles for non english speaking) and then mux it all with MKVMerge. You can use GUI's like Another EAC3To GUI, etc...
Personally I have AnyDVD HD installed and I use EAC3TO to demux the video from the movie untouched and I can either extract the...
ok guys/girls.... i'm ready for HD content media.. i've got everything else taken care of...
i would like your opinions...
How can I ad black bars to the 16:9 skin?
How can I ad black bars to the 16:9 skin?
BlueTwo wide is only undistorted on 16:9 resolutions (like 1280x720, 1366x768, 1920x1080). But many people are probably using...
Thanks for the positive feedback.
Enjoy :)
Thanks for the positive feedback.
Enjoy :)
Great thanks to everyone involved in MP. It's a great product although I only use it for the very basics it just does a fantastic...
Many thanks for writing the guide in the first place! :thx:
W7MC's internal player has worked for me most of the time, it's just the odd occasion when it decides to play up and not give me any sound, restarting MediaCenter usually resolves the issue.
When I installed the latest MediaPortal a few nights ago I tried out multiple...
Many thanks for writing the guide in the first place! :thx:
W7MC's internal player has worked for me most of the time, it's just...
A little over a year ago I found a bluray solution that I was satisfied with and haven't changed my MP installation since...
This is a work in progress. The PVR functionality in XBMC is still in development, and will not be included in the next official release, which should be within the next few weeks, but is on the roadmap for the next release, scheduled for the end of the year. This thread: [RELEASE] XBMC TV using MediaPortal TVserver (XBMP-TV Script) -...
This is a work in progress. The PVR functionality in XBMC is still in development, and will not be included in the next official...
I am a XBMC user who would love to get live tv streaming on the xbox.
I am interested in writing a python script (all I want is...
I used this guide i found on the videohelp forums and it worked a treat
How-to-extract-subtitles-from-a-Blu-ray-and-convert-to-srt-or-sub-idx
Since MP wont natively play the PGS subtitle streams, i convert and merge the SRT subtitle file into the MKV
One setting i noticed was the FPS set to 23.976, which could account for the...
I used this guide i found on the videohelp forums and it worked a treat...
Hi, I've been ripping my small collection of blurays to ts files using clown_BD (eac3to and tsmuxer gui interface).
I've been...
Hi Guys
Sometimes when i am listening to a concert i shut off the tv, but after RC5 when i do that, then after 1 minute or so MP stops playing, but when i turn on the tv again it starts again. However, it seems that 75% of the screen is MP and 25% is the desktop.
This is quite annoying.
It does not do it when i play music...
Hi Guys
Sometimes when i am listening to a concert i shut off the tv, but after RC5 when i do that, then after 1 minute or so MP...
Hi Guys
Sometimes when i am listening to a concert i shut off the tv, but after RC5 when i do that, then after 1 minute or so MP...
when playing a video file hit "Y" to bring up the context menu
then go to "Main Menu"
click on "Audio language"
pick the audio stream u want to play
when playing a video file hit "Y" to bring up the context menu
then go to "Main Menu"
click on "Audio language"
pick the...
I have installed Haali Media Splitter to get two audio streams (or so i thought), which works for AVIs (i dont have multiple...
Have been trying to optimise video quality of late.
I'm using an ATI Radeon 4550 card connected by HDMI to an 8th gen pioneer running at 1920x1080p.
TV set has more settings than is reasonable and of course there are further picture settings in CCC and in MP and in codecs themselves. So plenty of room for endless tweaking etc...
Have been trying to optimise video quality of late.
I'm using an ATI Radeon 4550 card connected by HDMI to an 8th gen pioneer...
Have been trying to optimise video quality of late.
I'm using an ATI Radeon 4550 card connected by HDMI to an 8th gen pioneer...
Some providers of dvb-t, like RiksTV in Norway will tell you to put the tv on a specific channel for up to 2 hours so that the card can be updated and non-free channels can be watched.
At what level is this update happening? Is this functionality implemented in mediaportal? Or, is that just a low-level thing happening automatically...
Some providers of dvb-t, like RiksTV in Norway will tell you to put the tv on a specific channel for up to 2 hours so that the card...
Some providers of dvb-t, like RiksTV in Norway will tell you to put the tv on a specific channel for up to 2 hours so that the card...
I was thinking maybe they should be some thing on mediaportal like Sky Anytime.
I was thinking maybe they should be some thing on mediaportal like Sky Anytime.
I was thinking maybe they should be some thing on mediaportal like Sky Anytime.
There's only one way I know of.
Open TV-Server config, under TV channels go to TV groups, click the mapping tab, highlight the channel by clicking on it then click the up button until it's at the top- moving these around alters the order channels appear on the TV guide, whatever's at the top gets loaded up with autostart.
Hope this...
There's only one way I know of.
Open TV-Server config, under TV channels go to TV groups, click the mapping tab, highlight the...
Is there a way to make tv start with a predefined channel. I want TV to always start with a specidic channel, the channel I use...