I am sorry for not responding sooner. I installed your patch in October and I have not experienced the issue since. Last month I then updated to the latest release of MP1 and everything is still good. Did that overwrite the patch?
This issue still seems resolved, thanks!
I am sorry for not responding sooner. I installed your patch in October and I have not experienced the issue since. Last month I...
MP refuses to record or watch with more than one tuner. The TV Config says two are idle, but I get no tuner available or "cannot...
Yes, that is exactly right. :)
The EPG is broadcast continuously, but it takes a finite amount of time to broadcast seven days of EPG for all of the channels. Precisely how much time is a matter of some debate. The figure of four minutes has been quoted in the past in other fora, but that was when there were significantly fewer...
Yes, that is exactly right. :)
The EPG is broadcast continuously, but it takes a finite amount of time to broadcast seven days of...
Hi, I have just started using MP but I am having problems setting up EPG for DVB-T correctly using TV-server. I have followed all...
Did you get that sample video?
Did you get that sample video?
Hi TMP folks,
SOrry if this is posted elsewhere I just cannot locate the info anywhere.
I currently run and have been running for...
I note that you were asking specifically about MP2. But I will mention that you cannot do this with MP1 either, for radio channels. MP1 supports this capability only for TV channels. (I sometimes want to record the 1-hour "Building a Library" segment from "Record Review" on Saturday mornings, but using MP I have to record the...
I note that you were asking specifically about MP2. But I will mention that you cannot do this with MP1 either, for radio...
Sorry if this has been previously dealt with, but how may I schedule a recording manually in MP2, for exmple, this morning I wanted...
Hi can anybody help me. I am not able to record anymore. Below you see I tried to record a program, but it dont work. It has been working before, but not anymore.
Hi can anybody help me. I am not able to record anymore. Below you see I tried to record a program, but it dont work. It has been...
Hi can anybody help me. I am not able to record anymore. Below you see I tried to record a program, but it dont work. It has been...
I'd like to be able to provide an explanation. However, in order to provide an explanation I need to understand what is happening, and I can't understand what is happening without the log files.
It might be possible, but I don't know how... and I think it would probably be just as hard to find out how to use DVBLink as to find a...
I'd like to be able to provide an explanation. However, in order to provide an explanation I need to understand what is happening...
Hi There!
First, sorry for my poor english and second, im not sure where to post this problem so i just put it here in newcomers...
These links may help with MP1 and Kodi:
http://montgomery1.com/htpc/
https://www.scintilla.utwente.nl/~marcelg/xbmc/
https://www.scintilla.utwente.nl/~marcelg/xbmc/tvserverxbmc.html
https://www.scintilla.utwente.nl/~marcelg/xbmc/mppvr-doc.html
These links may help with MP1 and Kodi:
http://montgomery1.com/htpc/
https://www.scintilla.utwente.nl/~marcelg/xbmc/...
Hello all new to forums so please bear with me.
I just installed MP version 1.13.0 and purchased a subscription from Schedules...
Exactly. There is not seperate tool. Full configuration is done inGui.
Exactly. There is not seperate tool. Full configuration is done inGui.
I just installed the MP2 client and server on Windows 10 and wanted to configure the client as the first thing. But there is no MP2...
Hello and welcome Andrew
MediaPortal does not provide drivers for any tuners. That's the responsibility of the product vendor - in your case, AVerMedia.
Anecdotally, in most cases tuners that have worked in W7 have continued to work in W10. The only confirmed exception I've come across so far has been the ATI HDTV Wonder. Based on...
Hello and welcome Andrew
MediaPortal does not provide drivers for any tuners. That's the responsibility of the product vendor - in...
Greetings All,
I have just successfully installed Media Portal 1 on Windows 7 with an AverMedia Polaris TV Tuner card, quite an...
Thanks. Now I know where to look in the future.
Thanks. Now I know where to look in the future.
When will the latest development updates be made available for download for MP2?
He means the green button on your remote control, it has nothing to do with WMC software.
Do you use mouse, remote or keyboard?
If you have a remote or keyboard just press the down button many times, as the scroll bar on the right side indicates there is more. The focus should appear after pressing a few times.
If you have a mouse...
He means the green button on your remote control, it has nothing to do with WMC software.
Do you use mouse, remote or keyboard?
If...
I have just installed MediaPortal2 in Windows10. I was able to find my TV channels. The first time I started MP2 I was able to...
It works. Thank you again :)
It works. Thank you again :)
Hello.
A first thanks for all the people who work at the realization of MediaPortal :)
I am planning to build an HTPC whose HDMI...
There is a newer Weekly version a lot have been using (myself included)
Just download this one and run the install, it will ask everything needed to install it.
Also I am including the MP2 Wiki site for assistance
First page, at the bottom is the installer link...
There is a newer Weekly version a lot have been using (myself included)
Just download this one and run the install, it will ask...
I just downloaded MediaPortal Setup.... and MP2 setup summer..... Do I need both? If so is there a specific order? I have a UBS...
Hi,
I am not totally sure, as I am in the UK and only have experience of terrestial UK TV.
Looking at the info you have provided though, my best guess is that they are all DVB-T (non HD) channels being broadcast from the same Mux (A), so any DVB tuner should be able to record them all at the same time using MediaPortal TV Server...
Hi,
I am not totally sure, as I am in the UK and only have experience of terrestial UK TV.
Looking at the info you have provided...
As a newbie in this "video grabing" filed I have a solution to my bosses request that he had put in front of me.
I was hoping for...
Very glad it is working for you.
MP1 and MP2 can be on the same machine, you have to be sure that the TV service for MP1 in services is Stopped if you plan to use MP2 for the TV...
Very glad it is working for you.
MP1 and MP2 can be on the same machine, you have to be sure that the TV service for MP1 in...
Hallo
I have successfully installed MP2 in a W10 environment. Channel scan and EPG loadings were also successful.
When I want...
Hi Jasmeet
I had this already in mind as well, but this scroll bar does not work.correction
I can not move the scroll bar by means of the mouse but
with the vertical arrows keys.next correction
mouse wheel works
Hi Jasmeet
I had this already in mind as well, but this scroll bar does not work.correction
I can not move the...
Hello . environment is as follows
W10, I7-CPU, 1Gb RAM, 1Tb HDD, TV card TBS6980.
I have MP1 sucessfully running and...
Your the Man! :D:D:D:D:D:D (or lady, don't want to be sexist)
The newly installed version 1.3 does the trick. I now can open the configuration utility and my Server shows!
Thank you.
I have one generic question to ask. Where would the appropriate forum be for that?
Cheers
Your the Man! :D:D:D:D:D:D (or lady, don't want to be sexist)
The newly installed version 1.3 does the trick. I now can open...
OK have read the suggested posts and changed hosts file as per sanderg. No joy as yet!
I have installed after much much much...
OK, I'm getting it now. I was looking in the TV configuration tool (attached picture above) for settings which I finally found in the actual program. I had already found the settings tile, but didn't see the settings menu from the TV program itself. Always something simple – thanks for your patience with me :)
OK, I'm getting it now. I was looking in the TV configuration tool (attached picture above) for settings which I finally found in...
I have latest MediaPortal 2 installed on a Windows 10 PC with Hauppauge TV card. I would like to configure the player including...
My solution was to get a new TV Tuner (In my case, it was the OTA tuner for Xbox One). I chose that as I still currently have DirecTV on my main TV, but eventually I do plan on canceling it. When I do, I'll move the tuner to the Xbox, but in the meantime I have the new tuner card working great with MP2.
I'll reply over there as well.
My solution was to get a new TV Tuner (In my case, it was the OTA tuner for Xbox One). I chose that as I still currently have...
I recently updated to Windows 10 and lost Media Center, which allowed me to watch live TV using my really old ATI HDTV Wonder card...
Another solution could be a VPN connection from mobile into your home network.
Another solution could be a VPN connection from mobile into your home network.
I have installed MP2 on my home PC , and it works very well . Given I travel a lot , I would like to get access to MP2 via internet...
Cool - lock screen == Windows Screen saver, so job done, don't think you'll have problem going forward.
TTFN - JCMP.
Cool - lock screen == Windows Screen saver, so job done, don't think you'll have problem going forward.
TTFN - JCMP.
I'm fairly new to Mediaportal and just upgraded to 1.13.
When watching recorded TV the video goes to windows wallpaper.
We have to...
As you didn't explicitely mentioned if you like to use MP1 or MP2, I'd like to point you to this thread for MP2: https://forum.team-mediaportal.com/threads/add-mce-recording-support-to-mp2-wtv-dvr-ms.131082/.
In short, WTV is there also supported inside "recordings" section of MP2. This feature is included in all newer builds, but I...
As you didn't explicitely mentioned if you like to use MP1 or MP2, I'd like to point you to this thread for MP2...
I will be setting up MP soon as I will eventually move on from WMC. A question that I have is, will MP play OTA TV recordings made...
- Locked
Success!
I installed latest fanart handler, they're all back showing,
Many Thanks for that,
Cheers.
Success!
I installed latest fanart handler, they're all back showing,
Many Thanks for that,
Cheers.
Hi,
I've just installed the New Media Portal 1.1.3 and am using Default wide Hd (the new one)
I'm having trouble accessing...
I have thought for quite a few years that the computer industry has a natural tendency to produce monopolies.
For example, if you are a new media-center user and you have problems setting up or using a particular media center, you want to go to the website that is likely to be frequented by the greatest number of people who are...
I have thought for quite a few years that the computer industry has a natural tendency to produce monopolies.
For example, if you...
Hello MediaPortal users,
I have started a website dedicated to HTPC hardware, software, gaming, and more. At the moment it is...
I'd be willing to help you with this if you want help. However you'll need to provide screenshots of your configuration, log files etc. in order to enable me (or anybody else to diagnose the situation.
I understand what you're saying. MediaPortal has never been as simple to configure and use as WMC. That's partly by design (some...
I'd be willing to help you with this if you want help. However you'll need to provide screenshots of your configuration, log files...
I can see the Music/TV/Videos Radio/Pictures/Plugins graphics. When I select the TV graphic, it reacts but does not go to another...
Well, that's pretty straightforward! :-)
Thanks for the reply,
ers
Well, that's pretty straightforward! :-)
Thanks for the reply,
ers
Hi folks,
Newcomer to Mediaportal TV-Server with a Kodi frontend.
I am getting ready to cut the cord and am wondering about one...
perfect thanks followed instructions seemed to work fine :)
perfect thanks followed instructions seemed to work fine :)
how to remove media portal 2 resource access drive windows 10 ? I ran into problems on first install so I uninstalled and...
MP1
MP2
Corrupted duplicate filename from samba share on freenas but only in mediaportal...fine in win 7.
DE
As TVSeries, MovingPictures and Videos all are separate, then they individually are not the issue - not that that helps, sorry:sick:
We [I say we, I really mean the much smarter people who haunt the forum (y) really do need logs for this one, I would suspect it's either some softlinks on the freenas side OR metadata associated with...
As TVSeries, MovingPictures and Videos all are separate, then they individually are not the issue - not that that helps...
I recently moved all my movies and tv shows to a freenas server and made it shareable via samba. This has worked fine for...
Wait....I have to install a client on the server and configure the client there?It seems a little unnecessary. If it's a media server why would it need a local client too? Couldn't it just have a setup program? Or a WebGUI?
Wait....I have to install a client on the server and configure the client there?It seems a little unnecessary. If it's a media...
I have just installed MP2. I'd like to configure it but I only have the Tv configure icon. How do i configure MP2?
Great. Thanks for the confirmation. :)
Great. Thanks for the confirmation. :)
Does anyone get this to work? For the last few months this has not worked for me. The process is OK until the result page which is...