I saw this mistake, I think that it is connected with that that at the first start of scanning the server swore on not initialized card and has not wanted to scan, at repeated attempt all has passed well...
It is necessary to try still? Or to wait the new version?
I saw this mistake, I think that it is connected with that that at the first start of scanning the server swore on not initialized...
TV-Server Version: 1.0 RC1
MediaPortal Version: 1.0 RC1
MediaPortal Skin: BlueTwo
Windows Version: Windows XP SP2 + All HotFix...
My idea was not to wake-up, but the documentation says that it will NOT enter hibernation, if the next event is less than 30 secs. away - so if a recording schedules a wake-up for each 25 sec every 25sec, than maybe you could avoid hibernation while recording.
My idea was not to wake-up, but the documentation says that it will NOT enter hibernation, if the next event is less than 30 secs...
Well, let's put this one to rest. One reason is I did not buy a license for PowerDVD and thus cannot be sure it works 100% as it should. Second reason is that by selection another version of the PowerDVD audio codecs, it works 100% as I would expect. Meaning: no freeze when switching on TV, and no change of the settings.
You can...
Well, let's put this one to rest. One reason is I did not buy a license for PowerDVD and thus cannot be sure it works 100% as it...
TV-Server Version: TV Server 1.0 RC1 Refresh
MediaPortal Version: MediaPortal 1.0 RC1 Refresh
MediaPortal Skin: Monochrome...
ah ok. It would probably make sense then to receommend (or even distribute?) ffdshow as audio decoder together with MP. This would save new MP users from falling into the "mpeg1 trap", since there still seem to be some TV stations out there that broadcast mpeg1 audio.
Anyway - Thanks for helping. I am using ffdshow for audio now...
ah ok. It would probably make sense then to receommend (or even distribute?) ffdshow as audio decoder together with MP. This would...
TV-Server Version: 1.0RC1
MediaPortal Version: 1.0RC1
MediaPortal Skin: Monochrome 1.7
Windows Version: Windows XP SP2
CPU...
Hi!
This happens on ALL channels I configured. CNN, Kabel 1 Austria, Vox, RTL, Super RTL, Pro7, PULS 4, GIGA, BBC, etc. Its random. But I cannot remember that e.g. NRJ Hits did not work which. It is on 11538 V. So, maybe it is that issue but I cannot really verify...
Sorry, Thomas
Hi!
This happens on ALL channels I configured. CNN, Kabel 1 Austria, Vox, RTL, Super RTL, Pro7, PULS 4, GIGA, BBC, etc. Its...
Hi!
I upgraded yesterday to RC1. I did a fresh install of the TV Database and I also made a new channel scan on DVB-S and DVB-T...
Problem Solved!
I checked the log myself thoroughly and found out History Channel was found two times during the channel scan in TV server. This is caused by the now also Technical merger of three cable providers, so my transponcer list picked up a second History channel. Result was that Mediaportal picked the first it had found...
Problem Solved!
I checked the log myself thoroughly and found out History Channel was found two times during the channel scan in...
TV-Server Version: TV Engine RC1
MediaPortal Version: RC1
MediaPortal Skin: Blue wide (standard
Windows Version: Vista SP1
CPU...
Are your .TS files very small ie no video content included. I doubt this but a very remote possibility even though I have never experienced this with MP? SD can average at 1gig and hour.
Have a good clean out of your codecs use Filmerit.
Which Catalysts do you use ? have you enabled any dual monitor modes or TheatreMode...
Are your .TS files very small ie no video content included. I doubt this but a very remote possibility even though I have never...
TV-Server Version: 1.0 RC1 refresh
MediaPortal Version: 1.0 RC1 refresh
MediaPortal Skin: Blue Two wide
Windows Version: XP SP2
CPU...
Ok, these are my logs.
I waited for the first SVN because noticed that there were some corrections from developers.
In fact, radio starts properly now, bt all the other problems remain.
Very slow starting of analog radio, sometimes (very often) channel changing doesn't work between different cards, recording doesn't work.
Anyway...
Ok, these are my logs.
I waited for the first SVN because noticed that there were some corrections from developers.
In fact...
TV-Server Version: 1.0.0.0 RC1
MediaPortal Version: 1.0.0.0 RC1
MediaPortal Skin: Blue Two 0.2.3.0
Windows Version: Windows XP...
i close this thread now, because its going from technical to personal.
as we clearly state in the wiki, we do not support certain OperatingSystems, simply because Microsoft does not support them in the way we would need it.
means that the do not release required patches.
if it works, good then you are lucky.
if not, than we can not...
i close this thread now, because its going from technical to personal.
as we clearly state in the wiki, we do not support certain...
TV-Server Version: 1.0 RC1
MediaPortal Version: 1.0 RC1
MediaPortal Skin: MonoChrome
Windows Version: Server: Vista Business /...
i didnt had the time to read throught the whole thread now, because caos @ work.
if we have a confirmed bug here, could someone please give me (one more time) a step by step description please? :)
i didnt had the time to read throught the whole thread now, because caos @ work.
if we have a confirmed bug here, could someone...
TV-Server Version: RC1
MediaPortal Version: RC1
MediaPortal Skin: default
Windows Version: XP SP2
CPU Type: AMD Athlon 1600+ XP...
infinityloop - you are saying either the audio stream from the tuner card getting corrupted or the TV-server's stream?
To rule out the tuner card, would a IRTrans remote volume change go to the tuner card? I didn't think it would touch the tuner card at all so I'm thinking it would be more likely the streamed data from the TV-server.
infinityloop - you are saying either the audio stream from the tuner card getting corrupted or the TV-server's stream?
To rule out...
TV-Server Version: RC1
MediaPortal Version: RC1
MediaPortal Skin: Widescreen
Windows Version: WinXP SP2 w/ latest updates
CPU Type...
we need the tv.log and error.log from your attempt to map the channel.
but be aware that after you did a scan with the tv-card, the channels are allready mapped to it.
a screenshot of the configuration util. where we see the "problem" would also help. :)
we need the tv.log and error.log from your attempt to map the channel.
but be aware that after you did a scan with the tv-card, the...
TV-Server Version 1.0 RC1:
MediaPortal Version 1.0 RC1:
MediaPortal Skin blue wide:
Windows Version xp sp2:
CPU Type p4...
i have seen this too once.
but afaik this was a bug of a very old WDM driver version from the skystar2, where it "locked" on some transponder for sat-i-net. :S
i have seen this too once.
but afaik this was a bug of a very old WDM driver version from the skystar2, where it "locked" on some...
Hi
i have a problem with my current media portal installation.
After changing to another TV channel the screen freezes and the...
i would suggest a clean reinstallation.
uninstall TV-Server
delete the database
make sure you use the latest hauppauge drivers
install latest version of TV-Server (see svn test build forums)
i would suggest a clean reinstallation.
uninstall TV-Server
delete the database
make sure you use the latest hauppauge drivers...
TV-Server Version: 1.0.0 RC1 (and SVN)
MediaPortal Version: 1.0.0 RC1 (and SVN)
MediaPortal Skin: blue
Windows Version: XP/SP2...
Nope turned out not to be related to the db at all. After multiple reinstalls I realised it was because I was replacing some of the files used for tuning channels and that was messing it up. (satellites.xml etc).
Pretty silly really, should have realised earlier but to be honest it would be nice if it chucked an exception rather...
Nope turned out not to be related to the db at all. After multiple reinstalls I realised it was because I was replacing some of the...
Hi there. I instaled as per the instructions and went ahead and configured everything.
But now when I return to TV Server...
I did a bit more research on the forums and figured i'd give the last suggestion a try - even though i didn't see why it would solve the problem.
Since both MS SQL Server and MySQL Server installations were failing i figured it would be something general doing it, but it turned out i could get it to work when i deleted the db and...
I did a bit more research on the forums and figured i'd give the last suggestion a try - even though i didn't see why it would...
Using 1.0 RC1 Refresh the setupTv.exe deletes the old TvLibrary correctly (which means it connects fine) but doesn't create the...
Similar problems here with MPV/MPA and MS VISTA codecs.
64QAM broadcasts are more prone than 16QAM .
Sometimes the sync is so far out after a jump forward that the playbak goes into ultra fast forward without sound.
Usualy if no sound present after a jump forward or channel change then a 5 second jump back syncs both.
Similar problems here with MPV/MPA and MS VISTA codecs.
64QAM broadcasts are more prone than 16QAM .
Sometimes the sync is so...
TV-Server Version: 1.0RC1
MediaPortal Version: 1.0RC1
MediaPortal Skin: Monochrome 1.7
Windows Version: Windows XP SP2
CPU...
Important part of the log showing as the schedule ends the redundant buffers that are linked are stop/deleted.
27-04-2008 15:10:01.127 DiskRecorder[RECORD] Stop 'D:\MY FILMS\F1_ Spanish Grand Prix Live - ITV1\F1_ Spanish Grand Prix Live - - 2008-04-27 - 12_00_1.ts'
27-04-2008 15:10:01.132 DiskRecorder[RECORD] Reset
27-04-2008...
Important part of the log showing as the schedule ends the redundant buffers that are linked are stop/deleted.
27-04-2008...
VISTA 32 dvb-t latest svn.
Only an inspection of the logs will show the problem.
While scheduled recordings are active any...
VISTA 32 dvb-t latest SVN.
1. start MP.
2. Navigate to MY/TV scheduled.
3. Choose any future schedules to delete
4. and if an active schedule is on MUX/frequency channel that is the same as the chosen future schedule to delete
5. The pop up for 'delete/stop' active schedule appears, yes/no. BUG
5. Choose 'yes' and chosen...
VISTA 32 dvb-t latest SVN.
1. start MP.
2. Navigate to MY/TV scheduled.
3. Choose any future schedules to delete
4. and if...
VISTA 32 dvb-t latest SVN.
1. start MP.
2. Navigate to MY/TV scheduled.
3. Choose any future schedules to delete
4. and if...
VISTA 32 dvb-t latest SVN.
1. Sart MP.
2. Navigate to MYTV, scheduled.
3. Choose schedule that is in progress.
4. right click schedule.
5. Choose start from live point.
Instead of accessing the actual recording file a new timeshift buffer is started .
It also means there is no available navigation to prior to 'live point'...
VISTA 32 dvb-t latest SVN.
1. Sart MP.
2. Navigate to MYTV, scheduled.
3. Choose schedule that is in progress.
4. right click...
VISTA 32 dvb-t latest SVN.
1. Sart MP.
2. Navigate to MYTV, scheduled.
3. Choose schedule that is in progress.
4. right click...
Hi,
Disable the "Import files in new tvguide.lst", click "ok" to save setup & close, then open TVGuide.xml in notepad & save it again & then try again(TV Server will detect new file & start to import), on my test channel it imported successfully ;)
Hi,
Disable the "Import files in new tvguide.lst", click "ok" to save setup & close, then open TVGuide.xml in notepad & save it...
When I upgraded to RC1, tvguide.xml would not import anymore.
Logs and video attached.
Epg grabber used is: Heerfordt...
Hi,
I think I found the reason: Insufficient disk space! (Oh boy, I should have thought of this earlier...)
Obvously TV Server could not create more than one single tsbuffer file then the partition was full. The reason being immense amount of leftover files in \windows\temp and ...\Documents and Settings\... folders. So watch out...
Hi,
I think I found the reason: Insufficient disk space! (Oh boy, I should have thought of this earlier...)
Obvously TV Server...
TV-Server Version: 1.0RC1
MediaPortal Version: 1.0RC1
MediaPortal Skin: Monochrome 1.7
Windows Version: Windows XP SP2
CPU...
I've got most of mine working now, only blackcreen is Luxe TV HD. I installed FFDShow as Paranoid dillusion suggested in previous post, just using audio default codec settings, except MPeg 2 changed to mp3lib, MPeg 2 video codec Cyberlink Video/SP Decoder (PDVD7).
I've got most of mine working now, only blackcreen is Luxe TV HD. I installed FFDShow as Paranoid dillusion suggested in previous...
TV-Server Version: 1.0.0.0 RC1
MediaPortal Version: 1.0.0.0 RC1
MediaPortal Skin: Blue Two
Windows Version: 2k3 r2 sp2
CPU...