Having trouble installing or configuring MediaPortal?
I had the same problem with 7 RC1.
Fixed it by instaling the IR-Suite thingy form the plugins section.
1. Install left all settings as default.
2. Deselect MCE controller in MP Config.
and away we go, all buttons working again.
There is a tread in here some where about it.
I had the same problem with 7 RC1.
Fixed it by instaling the IR-Suite thingy form the plugins section.
1. Install left all...
Using Windows 7 RC1 with MP 1.0.2.0 and an MCE remote. Only the arrow and OK buttons are functioning in MP. I previously was...
That did it!
:thx:
That did it!
:thx:
TV-Server Version: 1.0.2
MediaPortal Version: 1.0.2
MediaPortal Skin: xface 1.0.1.0
Windows Version: vista ultimate sp2 32 bit...
No, I have a different OS (Windows XP) installed on each one. Its like I have 4 different computers, but the ones with SATA HDD's do not work, or at least they do no allow MP to detect my TV card.
m.
No, I have a different OS (Windows XP) installed on each one. Its like I have 4 different computers, but the ones with SATA HDD's...
I have a Hauppauge HVR 2200 and 4 different HDD's. Three of them are SATA and one is the old ATA ribbon thing. Installing media...
MediaPortal Version: 1.0.1
MediaPortal Skin: Monochrome 2.8
Windows Version: Vista x64
CPU Type: AMD X2 4850e
HDD: 500GB Samsung Spinpoint
Memory: 4GB DDR2
Motherboard: Gigabyte MA78GM-S2H
Video Card: Onboard
Sound Card: Onboard
TV - HTPC Connection: HDMI
Receiver: Sony SS1300
I have Mediaportal set up with The KMPlayer...
MediaPortal Version: 1.0.1
MediaPortal Skin: Monochrome 2.8
Windows Version: Vista x64
CPU Type: AMD X2 4850e
HDD: 500GB...
MediaPortal Version: 1.0.1
MediaPortal Skin: Monochrome 2.8
Windows Version: Vista x64
CPU Type: AMD X2 4850e
HDD: 500GB...
TV-Server Version: 1.02
MediaPortal Version: 1.02
MediaPortal Skin: Default
Windows Version: Windows XP SP3
CPU Type: AMD 64 3000+
HDD: 250GB Maxtor EIDE
Memory: 1GB Corsair DDR2-800
Motherboard: MSI Neo2 Nforce3 Chipset
Video Card: ATI X800XT All in Wonder
Video Card Driver: 8.591.0.0 - Catalyst 9.3
Sound Card: Soundblaster...
TV-Server Version: 1.02
MediaPortal Version: 1.02
MediaPortal Skin: Default
Windows Version: Windows XP SP3
CPU Type: AMD 64...
TV-Server Version: 1.02
MediaPortal Version: 1.02
MediaPortal Skin: Default
Windows Version: Windows XP SP3
CPU Type: AMD 64...
Update: With a little tweaking in the mentioned parts I got MP configuration to stop telling me it's "unable to create a graph". Here's how I did it:
Thing is it still doesn't work. I could get to configure and scan channels in MP Configuration, but the little channel preview screen there was black all the time. It did find all the...
Update: With a little tweaking in the mentioned parts I got MP configuration to stop telling me it's "unable to create a graph"...
Okay, so I have that card with a Philips SAA7160 chip, and I'm trying to make it work with TVE2.
I went from zero to having been...
MediaPortal Forum - Threads Tagged with win7
MediaPortal Forum - Threads Tagged with win7
Hi,
I have setup a dual boot on my HPTC, having Windows 7 RC1 installed and working fine. Have installed my gpu, audio and...
some texts are unreadable...
some other are correct..
some texts are unreadable...
some other are correct..
i've installed mediaportal on a lcd pc with 800x600 resolution
but that is the result...
what can ai do?
regards...
Anybody. Still having this issue with the 1.0.2 release.
Anybody. Still having this issue with the 1.0.2 release.
Can anybody tell me how to configure the default used view in My Music. Somehow I always get het 'Shares' view. I don't want to...
Got the same problem with my Hauppauge 2200 TV card.
mike
Got the same problem with my Hauppauge 2200 TV card.
mike
Area: Media Portal Program
MediaPortal Version: 0.2.2.0 (2006-12-21)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)...
Yeah I have the same problem.
Win TV detects my TV card fine, and works ok, but the TV server in MP will not detect the same card.
Have reinstalled, changed drivers etc but no luck!
Mike
Yeah I have the same problem.
Win TV detects my TV card fine, and works ok, but the TV server in MP will not detect the same...
MediaPortal Version: RC1
Windows Version: XP home edition
1. TV Card: Hauppauge HVR-850
1. TV Card Type: USB
Hi I'm new to...
the installer seems a bit overeager when updating. after updating from 1.0.1 to 1.0.2 i found that the keyboard layout has been reset to the defaults and mediaportal was not able to connect to the tv-server any longer. launching the tv-server config, it asked for the database password again. it might be important that i did not use...
the installer seems a bit overeager when updating. after updating from 1.0.1 to 1.0.2 i found that the keyboard layout has been...
the installer seems a bit overeager when updating. after updating from 1.0.1 to 1.0.2 i found that the keyboard layout has been...
TV-Server Version: 1.0RC2
MediaPortal Version: Newest
Windows Version: XP
CPU Type: AMD 4850e
HDD: WD GS 1TB
Memory: 4GB GeIL DDR2-6400
Motherboard: Gigabyte MA780 US2H
Video Card: Onboard ATI 3200
Video Card Driver: ATI
Sound Card: Onboard
Sound Card AC3: Realtek
Sound Card Driver:
1. TV Card: ASUS P7131 Hybrid
1. TV...
TV-Server Version: 1.0RC2
MediaPortal Version: Newest
Windows Version: XP
CPU Type: AMD 4850e
HDD: WD GS 1TB
Memory: 4GB GeIL...
TV-Server Version: 1.0RC2
MediaPortal Version: Newest
Windows Version: XP
CPU Type: AMD 4850e
HDD: WD GS 1TB
Memory: 4GB GeIL...
Ooh, thx! It worked!
I got one more problem.
When mediaportal is mounting a video, the sign with "The virtual drive wasn't ready in time" still appear. The options I got is "Ret(ry)" or "Can(cel)". But it's appear in the "background", just behind windows media player.
Any ideas? :(
Ooh, thx! It worked!
I got one more problem.
When mediaportal is mounting a video, the sign with "The virtual drive wasn't...
I have tried to find the answer from other threads and webpages...but I can't solve the problem :(
:mad:I'm quite frustrated at...
Thanks for that, tried a few codecs, currently CoreAvc + Purevideo. Will try a different graphics driver before I trash it all again, may just work.
Thanks for that, tried a few codecs, currently CoreAvc + Purevideo. Will try a different graphics driver before I trash it all...
After having a few issues with MP, I decided to give Vista a go, to see if any improvement. Problem is now, I cannot get HD TV to...
Hi there,
I want to get your help with my installation scenario:
I want to use 4 Clients and on Server (on the server runs a client, too) in my house.
My question is how to do the setup, that all the clients can use the same configuration and settings?
All my music-files, movies and pictures are on the server in a...
Hi there,
I want to get your help with my installation scenario:
I want to use 4 Clients and on Server (on the server runs a...
Hi there,
I want to get your help with my installation scenario:
I want to use 4 Clients and on Server (on the server runs a...
I have the same problem with antoher Logitech remote S510 Media Remote.
Has worked fine for a year, but not anymore after doing some configurations in MP & also adding a hotkey in the Logitech SW.
Have checked the 'back'-key in MP's HID and MCE remote setup : -Set to 'Previous menu', no conditions.
Does anybody have any ideas ...
I have the same problem with antoher Logitech remote S510 Media Remote.
Has worked fine for a year, but not anymore after doing...
TV-Server Version: NA
MediaPortal Version: 0.3.2.0
MediaPortal Skin: Wide
Windows Version: Vista Ultimate x86
CPU Type: Mobile...
TV-Server Version: as supplied with 1.0.2
MediaPortal Version: 1.0.2
MediaPortal Skin: Blue 3
Windows Version: XP Pro SP3
CPU Type: AMD 4850e, 2ghz Core 2 duo
HDD: 1Tb Western Digital greenpower
Memory: 2*2Gb DDR2 667Mhz
Motherboard: Gigabyte MA78GPM-D2SH
Video Card: Radeon HD3200 built in
Video Card Driver: Ati Catalyst 9.4...
TV-Server Version: as supplied with 1.0.2
MediaPortal Version: 1.0.2
MediaPortal Skin: Blue 3
Windows Version: XP Pro SP3
CPU...
TV-Server Version: as supplied with 1.0.2
MediaPortal Version: 1.0.2
MediaPortal Skin: Blue 3
Windows Version: XP Pro SP3
CPU...
TV-Server Version: n/a
MediaPortal Version: 1.0.2
MediaPortal Skin: unknown
Windows Version: XP MCE 2005 SP3
CPU Type: AMD sempron 3000+
HDD: 250gb WD
Memory: 1gb
Motherboard: unknown
Video Card: geforce 7300
Video Card Driver: latest
Sound Card:
Sound Card AC3: yep
Sound Card Driver: latest
1. TV Card: no
1. TV Card...
TV-Server Version: n/a
MediaPortal Version: 1.0.2
MediaPortal Skin: unknown
Windows Version: XP MCE 2005 SP3
CPU Type: AMD...
TV-Server Version: n/a
MediaPortal Version: 1.0.2
MediaPortal Skin: unknown
Windows Version: XP MCE 2005 SP3
CPU Type: AMD...
pureaudio.dll was the problem
Brilliant - just deleted the pureaudio.dll and all is perfect again
Big thanks sugop
pureaudio.dll was the problem
Brilliant - just deleted the pureaudio.dll and all is perfect again
Big thanks sugop
TV-Server Version: rc4
MediaPortal Version: rc4
MediaPortal Skin: blue3 wide
Windows Version: xp - sp3 fully patched
CPU Type...
My logs just in case.
My logs just in case.
TV-Server Version: as supplied with 1.0.2
MediaPortal Version: 1.0.2
MediaPortal Skin: Blue 3
Windows Version: XP Pro SP3
CPU...
Why dont you use Moving Pictures. This plugin scans the image its name and grabs the covers from internet all by its self. If it has multiple matches, it will ask you to select the correct one. You can also create a .txt / .nfo file in each folder of a movie with the imdb url in it of the movie. This way the match is always correct...
Why dont you use Moving Pictures. This plugin scans the image its name and grabs the covers from internet all by its self. If it...
The "My Films"-list in MediaPortal shows the IMDB-info it found when I scanned for movies.
These are only divx etc.. (It crashes...
Upgrade of TV Server PC from 1.0.0 to 1.0.2 was successful. Upgrade of one of my client PCs failed.
First error dialogue popup...
MediaPortal TV Server / Client Setup
MediaPortal TV Server / Client is not installed. It is not possible to install this update.
Installation will be canceled.
Second error dialogue popup...
Upgrade of TV Server PC from 1.0.0 to 1.0.2 was successful. Upgrade of one of my client PCs failed.
First error dialogue...
Upgrade of TV Server PC from 1.0.0 to 1.0.2 was successful. Upgrade of one of my client PCs failed.
First error dialogue...
How to gather log files
How to show System Specs
How to start support/bug thread
--- PLEASE DO NOT COMMENT THIS MESSAGE ---
Logs and system specs should always be added - just in case
Hope that helps you help people who can help you :)
How to gather log files
How to show System Specs
How to start support/bug thread
--- PLEASE DO NOT COMMENT THIS MESSAGE ---
Logs...
Hi All.
I have changed my Mediaportal setup and am having issues on one Machine.
I have a Server which has nothing but the TV...
Thank's! Explains it all :-)
Thank's! Explains it all :-)
Hi,
I have just done a clean install of Mediaportal 1.0.2. I'm trying to use the extension installer, but is not able to get any...
Ok - complete reinstall worked.
Ok - complete reinstall worked.
TV-Server Version: as supplied with 1.0.2
MediaPortal Version: 1.0.2
MediaPortal Skin: Blue 3
Windows Version: XP Pro SP3
CPU...
With the 1.0.2 version works !
I will try it.
Thanks a lot
With the 1.0.2 version works !
I will try it.
Thanks a lot
TV-Server Version: 1.0.1
MediaPortal Version: 1.0.1
MediaPortal Skin: Default
Windows Version: XP SP3
CPU Type: Intel Q6600...
You have to enable this to use this
In configuration -> general
The last option (use screenselector [...]) must be enabled.
You have to enable this to use this
In configuration -> general
The last option (use screenselector [...]) must be enabled.
Hi there Guys. Just installed MP for the first time and think it's gonna be a great solution to watching my 720 + 1080 mkv files...
Hello,
I'm trying for some days now to let my remote (RC-2400) work fine with MP. After reading some topics overhere I did installed the vista remote on my xp system the right way (I think;)) . The buttons up/down/left/right/ok/back did work, other buttons didn't.
The only thing that didn't go well was the configuration to set...
Hello,
I'm trying for some days now to let my remote (RC-2400) work fine with MP. After reading some topics overhere I did...
Hello,
I'm trying for some days now to let my remote (RC-2400) work fine with MP. After reading some topics overhere I did...
Update:
I got it to be listed in MP configuration. I do get Unable to Create Graph, but for me that's a huge improvement.
I created this thread for a tidier, more focused technical discussion on how to make my card work in tve2...
Update:
I got it to be listed in MP configuration. I do get Unable to Create Graph, but for me that's a huge improvement.
I...
How can I know whether I have the old TV engine installed? I updated to 1.0.2 and noticed the option was unselectable and said...