I do not know but I will see if I can find anything in the manual that mentions it. I guess I could also just try it and see. :)
Also how would I go about disabling whatever they have allowing it to work or will the plugin override it?
I do not know but I will see if I can find anything in the manual that mentions it. I guess I could also just try it and see. :)...
TV-Server Version: V1.0
MediaPortal Version: V1.0
MediaPortal Skin: Blue3
Windows Version: XP Pro SP3
CPU Type: AMD X2 7750...
It's probably caused by a windows update which erroneously wiped the IPV6 localhost from your hosts file. Windows defender was the culprit.Check your Windows hosts file to make sure it still has entries for IPV4 & IPV6 for localhost.
There's a thread on this here somewhere, but can't find it at the moment.
It's probably caused by a windows update which erroneously wiped the IPV6 localhost from your hosts file. Windows defender was the...
TV-Server Version: 1.0 RC2
MediaPortal Version: 1.0 RC2
MediaPortal Skin:
Windows Version: XP SP2
CPU Type: Athlon 1900
HDD...
The windvr3 software gets installed on the TV Server that has the 1250 in it. It just installs filters that TV Server can use to take advantage of the 1250 analog side. No settings needed to be changed in TV Server or anything. Just install, and start recording/viewing enough channels that you know the 1250 is being used.
The windvr3 software gets installed on the TV Server that has the 1250 in it. It just installs filters that TV Server can use to...
TV-Server Version: RC-2
MediaPortal Version: 1.0 TV Server & Client
MediaPortal Skin: Default Skin (Blue)
Windows Version: XP...
I made the request with the template form:
https://forum.team-mediaportal.com/improvement-suggestions-46/default-audio-renderer-device-whole-mediaportal-57758/#post403230
Ciao,
Cristian
I made the request with the template form...
Hello,
is it somehow possible to select a different default audio device globally for MediaPortal that is used, for example, for...
I think you're probably right. I recently did do a "dummy spit" on XP after I'd spent weeks chasing up a stuttering problem to eventually find that it was caused by XP's having, without any warning, locked out DMA on the disk I was recording & timeshifting on.
I installed Vista and found that MP also runs into another set of...
I think you're probably right. I recently did do a "dummy spit" on XP after I'd spent weeks chasing up a stuttering problem to...
TV-Server Version:
MediaPortal Version: 1.0.0.0
MediaPortal Skin:
Windows Version: Vista Home Premium
CPU Type: Dual Core...
I actually started with that thread, but my head hurt after half a dozen pages or so. I'll review the rest of those posts and possibly post to that thread if I can't find anything.
Thanks for the reply!!
Scott
UPDATE: I didn't find specific help in the thread, but I did download and install the tvn and sve builds from 3/26 which...
I actually started with that thread, but my head hurt after half a dozen pages or so. I'll review the rest of those posts and...
Hello experts! I've been using MP for about a year now to play movies stored on my HD to my 1080p TV. I finally decided to make...
Dreambox and DVBSBridge
Hi milepile,
first, sorry i don't speak German nor Switzerdütch. I can only speak french or english, but not so good.
For DVBSBridge, after installation, you must go in DVBSBridge Configuration, put you Dreambox ip adress, user and password. Apply the settings and click on the 3 dots button near Mapped...
Dreambox and DVBSBridge
Hi milepile,
first, sorry i don't speak German nor Switzerdütch. I can only speak french or english...
TV-Server Version: 1.0.0 final relase
MediaPortal Version: 1.0.0 Final release
MediaPortal Skin: Xface
Windows Version: XP Pro...
I'm looking to install a tv card but the only one i can find in South Africa With both Analog and DVB-T is a genius TVGO DVB-D11 is there any support fot it?
I'm looking to install a tv card but the only one i can find in South Africa With both Analog and DVB-T is a genius TVGO DVB-D11 is...
I'm looking to install a tv card but the only one i can find in South Africa With both Analog and DVB-T is a genius TVGO DVB-D11 is...
Doesn't help...
Thanks but it doesn't solve my Problem.
I cant open for example a multischortcut Executable if TV is running..
I only can stop it in the settings of multishortcut....
Has somebody another Idea?
Doesn't help...
Thanks but it doesn't solve my Problem.
I cant open for example a multischortcut Executable if TV is running...
Hello..
I have a problem. If TV is running i cant open the taskbar with the windows button on the keyboard.
Also i can not open...
TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard:
Video Card:
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card:
1. TV Card Type:
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card...
TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard...
TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard...
In some way it works...
I go under TV channel properties (in TV Server config)...
TV-Server/Configuration/TVChannels - MediaPortal Manual Documentation
... and I can assign the number I prefer to each channel.
Then, just like suggested by You I untick the box in MP config\television and I can directly access to a channel...
In some way it works...
I go under TV channel properties (in TV Server config)...
TV-Server/Configuration/TVChannels -...
New user here. Purchased a Fusion HDTV 7 PCI card. Trying to get it to work with a Gateway 420GR. 3 ghz Pentium, SATA, NVida FX5200, 1 gig memory. I was having issues with Fusion software and I REALLY like what I see here with Mediaportal! BUT, when I try to watch HD with MediaProtal, it herks and jerks as it is playing. I am using...
New user here. Purchased a Fusion HDTV 7 PCI card. Trying to get it to work with a Gateway 420GR. 3 ghz Pentium, SATA, NVida...
New user here. Purchased a Fusion HDTV 7 PCI card. Trying to get it to work with a Gateway 420GR. 3 ghz Pentium, SATA, NVida...
Hi again :)
You will have to install and setup the plugins on the client side.
If you follow the guidelines here, you will be able to use the same database.
Hi again :)
You will have to install and setup the plugins on the client side.
If you follow the guidelines here, you will be...
Hello all.
I was running Media Portal 1.0 with SVN 21720, SAF and using StreamedMP. I've been updating it every few months. I...
what is the latest Version of the h.264 codec that works? and where can i find it? I've got V 2.2.0.916 and In the PDVD9 Trail there's only the Version 2.2.0.527
what is the latest Version of the h.264 codec that works? and where can i find it? I've got V 2.2.0.916 and In the PDVD9 Trail...
Hi all,
just a little question:
I just upgraded to PowerDVD 9.
Since then I cannot choose the H.264 codec from PowerDVD in...
I am trying to map my Logitech wireless gamepad to MP so I can use the mini joystick to go between menus and play dvd's etc. I discovered the tab that lets me use the gamepad but it won't let me edit the key, its like its locked or something.
I am trying to map my Logitech wireless gamepad to MP so I can use the mini joystick to go between menus and play dvd's etc. I...
I am trying to map my Logitech wireless gamepad to MP so I can use the mini joystick to go between menus and play dvd's etc. I...
I've posted a problem in the wrong section:oops: here
Just a basic over again - TVServer has picked up the card and scanned the channels fine - can preview all the channels.
Card is showing in MP config but no channels - after watching the video guide it stated to delete the card from the config so I have now done this.
It then...
I've posted a problem in the wrong section:oops: here
Just a basic over again - TVServer has picked up the card and scanned the...
I've posted a problem in the wrong section:oops: here
Just a basic over again - TVServer has picked up the card and scanned the...
OK,
Configuration files are set up. I can scan for channels but can't find any.
I've checked all physical connections to the dish, and I've tried various settings as well as leaving the settings empty (default) no channels found.
Can any-one confirm the LNB settings I need for Christchurch?
My Dish is a Sharp Ku-LNBF
The...
OK,
Configuration files are set up. I can scan for channels but can't find any.
I've checked all physical connections to the...
Hi all from Christchurch New Zealand,
Just installed MediaPortal 1.0.0 (TV-Server) on my PC. Got DVB-T and TV1,TV2,TV3,C4 analog...