Having trouble installing or configuring MediaPortal?
That sounds more like a autorun enabled issue than cd\dvd drive showing up, latest svn's you are able to remove optical drives from being shown.
That sounds more like a autorun enabled issue than cd\dvd drive showing up, latest svn's you are able to remove optical drives from...
MediaPortal Version: 1.0 RC4
I have removed unwanted folders from the Movie Folders list, but they still appear. How can I...
Yes.
Change your decoder for your Live TV to FFDSHOW. In FFDShow setting enable post processing and select de-interlaced (whole image). Fixed my image tearing issue that you describe/
Yes.
Change your decoder for your Live TV to FFDSHOW. In FFDShow setting enable post processing and select de-interlaced (whole...
Do any of you guys have the HVR-2200 runnning in MP1 with the TV Server under Vista x64 problem free?
Im asking because this card...
there is nothing to stop you scanning on a clean MP1.0 and then putting svn 21864 on top, its only if you scanned a new from that svn does the problem come in, backup your sql database and move to somewhere safe once done :)
there is nothing to stop you scanning on a clean MP1.0 and then putting svn 21864 on top, its only if you scanned a new from that...
I have just done a clean install of MP1+updated to 21864. I have 1x 7010ix and 1x Nova T-500, ignoring analogue I have 4xDVB-t and...
OK, well I seem to have been able to get it to work with MySQL, thanks for that.
:thx:
Now I have to figure out how to get the TVServer application to work with an external Set Top Box.
Most of the reading I have done on Media Portal indicates people use it to tune their TV as well, but in NZ to get any decent TV you pretty...
OK, well I seem to have been able to get it to work with MySQL, thanks for that.
:thx:
Now I have to figure out how to get...
Hi guys I'm retrying Media Portal after initially giving it a look a couple of years ago when building my HTPC. I've recently...
Great :)
Great :)
I had a working install (single seat) running until last night, but after some network changes the TV server config no longer...
As far as I know the client once disconnected from the server will not check again if it's available. That why you have to close and restart the client. I don't know if there is something going on to change this.
As far as I know the client once disconnected from the server will not check again if it's available. That why you have to close...
Hi i have some Problems with my Media Portal:
1. Switching Channels takes too long. If i switch the Channel with remote control...
TV-Server Version:
MediaPortal Version: 1.00
MediaPortal Skin: default
Windows Version: XP Pro sp3
CPU Type: Core Duo
HDD: 320 gig Seagare
Memory: 2 gig
Motherboard: MSI
Video Card: Nvidia go
Sound Card AC3: Reaktek
1. TV Card: Twinhan 1034
1. TV Card Type: BDA
1. TV Card Driver: Latest
Hi, I have 1 sever and...
TV-Server Version:
MediaPortal Version: 1.00
MediaPortal Skin: default
Windows Version: XP Pro sp3
CPU Type: Core Duo
HDD...
TV-Server Version:
MediaPortal Version: 1.00
MediaPortal Skin: default
Windows Version: XP Pro sp3
CPU Type: Core Duo
HDD...
Got WebEPG working in USA using IMDB for local stations
I had a very similar experience to Solas989, except I just made my grabber file from scratch. I just had to personalize my grabber file to work for my zip and a local provider. Here is a link to a post I made that includes my grabber file and what to do to configure it for...
Got WebEPG working in USA using IMDB for local stations
I had a very similar experience to Solas989, except I just made my grabber...
I can't get the U.S Over The Air epg to work with my Geniatech HDTV thriller PCI X8350A in Xp. I know it's possible because the...
I would not waste time and use the embedded EPG with the TV channel signal. From what I have heard only covers a day or 2 and contains minimal information e.g. Movie, instead of a full movie title and description. After wrestling the US EPG issue for 2 years the mc2xml method with the XMLTV plugin is the best. I actually pay for...
I would not waste time and use the embedded EPG with the TV channel signal. From what I have heard only covers a day or 2 and...
How am I supposed to get tv guide information in the US? I've looked everywhere, am I missing something? I have charter cable if...
Hey,
Same thing happened to me. Its probably your antivirus. I was using threatfire at the time, because it was recommended to me by someone. Switched over to avast! which I use on my day-to-day computer, works great. Haven't ever had a problem with it, and I've had it for two years. McAfee/Norton :growl:
Anyways, your antivirus...
Hey,
Same thing happened to me. Its probably your antivirus. I was using threatfire at the time, because it was recommended to me...
TV-Server Version: N/A
MediaPortal Version: 1.0.0.0
MediaPortal Skin: (whatever is default)
Windows Version: Vista Home Premium...
That's true - the current MP log files are more dedicated to analysis and debugging.
I would also appreciate if another logfile could be created, that will not be deleted and holds just history of media played - e.g. in the form:
Mediatype, Date, Time, Duration, Category, Title, Source
Video, 2009-03-17, 11:32, 5:02, Video...
That's true - the current MP log files are more dedicated to analysis and debugging.
I would also appreciate if another logfile...
Hi,
I need to log kids activity (what they watch) on mediaportal but I have one problem and one question.
Problem is that I...
How do you change the Menu title, so I can get the word My out of the way. So it will just say
Music
Videos
Wikipedia and so on.
Thanks
I didn't meant to post this question, I was trying to use the search through post that pops up when you are about to post something. I found it in there. Sorry to waste the posting space...
How do you change the Menu title, so I can get the word My out of the way. So it will just say
Music
Videos
Wikipedia and so on...
How do you change the Menu title, so I can get the word My out of the way. So it will just say
Music
Videos
Wikipedia and so on...
thanks m8
thanks m8
Hi guys.
Just got a Logitech DiNovo Mini for my MediaPortal.
But there is some buttons such as Play/Pause and vol. who wont...
That was fast :-)
Thanks soooooo much ! It worked for me.
That was fast :-)
Thanks soooooo much ! It worked for me.
After clicking on TV-Server configuration MP asks me to start TV-Server. Then I cklick on OK. Then I wait for about 5 mins. ans...
Woohoo!
Windows Aero has seemed to be the trick. Thankyou once again.
Woohoo!
Windows Aero has seemed to be the trick. Thankyou once again.
Hi,
I have installed MediaPortal and am wishing to watch TV on the same PC the tuner is in. IE - I am not going to be streaming...
I'm pulling my hair out over here. I can see tv on my server machine, but not on my client. I've even removed the router, to help eliminate what the problem can be,
Is it IP and windows related?
Is it firewall related, turned everything off, both computers. I've installed and reinstalled 10 times now. Went through both type...
I'm pulling my hair out over here. I can see tv on my server machine, but not on my client. I've even removed the router, to help...
I'm pulling my hair out over here. I can see tv on my server machine, but not on my client. I've even removed the router, to help...
Try this. I had the same problem, and this fixed it. I found loads of posts with the same problem and no solution, before I got lucky and the author of this post happened to fix another issue for me
https://forum.team-mediaportal.com/newcomers-forum-240/windows-defender-breaks-localhost-56258/
Try this. I had the same problem, and this fixed it. I found loads of posts with the same problem and no solution, before I got...
TV-Server Version: 1.00
MediaPortal Version: 1.00
MediaPortal Skin: Default
Windows Version: Vista Ultimate 64 Sp1
CPU Type...
Maybe someone can help you out with information if you tell us what you want the emulated dvb card to do.
As far as i know there is no emulated dvb device available.
Maybe someone can help you out with information if you tell us what you want the emulated dvb card to do.
As far as i know there...
Is there some of software plugin which emulates a hardwaredevice (a dvb card).
I am looking for such a device for a specific...
Working?
Hello,
Did you make your Winfast HDTV Cinema work? After couple MP updates the TV reception is gone for good and I am stuck with convertabox. Love the MP still but this sucks ...
Thanks for reply
Milos
Working?
Hello,
Did you make your Winfast HDTV Cinema work? After couple MP updates the TV reception is gone for good and I am...
TV-Server Version: N/a
MediaPortal Version: 0.2.3.0
MediaPortal Skin:
Windows Version: XP SP2 32bit
CPU Type: AMD Athlon 64...
TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard:
Video Card:
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card:
1. TV Card Type:
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card...
TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard...
TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard...
TV-Server Version: NO TV-SERVER
MediaPortal Version: 1
MediaPortal Skin: Monochrome
Windows Version: Win XP 32Bit Sp3
CPU Type: AMD X2 5050e
HDD: 1Tb Samsung
Memory: Kingston PC400 4gb
Motherboard: MSI K9A2GM-FD/FIH
Video Card: Ati hd3200
1. TV Card: Pinnacle PCI Dual Sat Pro
1. TV Card Type: DVB-S
TV - HTPC Connection: HDMI
Hi...
TV-Server Version: NO TV-SERVER
MediaPortal Version: 1
MediaPortal Skin: Monochrome
Windows Version: Win XP 32Bit Sp3
CPU Type: AMD...
TV-Server Version: NO TV-SERVER
MediaPortal Version: 1
MediaPortal Skin: Monochrome
Windows Version: Win XP 32Bit Sp3
CPU Type: AMD...
ir server suite
Did you check out IR Server Suite? I think it does exactly what you want after you've configured it. You might even try to run the HDMIon app when you press Channel Up or Channel Down, so MP first changes the channel and then fires an external command.
ir server suite
Did you check out IR Server Suite? I think it does exactly what you want after you've configured it. You might...
Hi
Is there an easy way to use a remote button to run an external process, either directly or just fire a hot key combo to a...
It would be great if this was a set-able value or a similar variable created.
I haven't managed to tweak comskip just right yet and all our add breaks are almost exactly 4 mins anyway.
I previously used an Imon remote and had its macro send 5 "step forwards" to acheive the skip. Got sick of the poor range and have now upgraded to...
It would be great if this was a set-able value or a similar variable created.
I haven't managed to tweak comskip just right yet...
Hi
Is there any way to set the step size for this?
It seems to be set at 7 mins.
We are not forcing _any_ hardware upgrade and didn't change anything on the MP prerequisites side. Only introduced a check about the directx version installed ( same as before !!! ) just in case someone missed some critical updates to this operating system component.
Simone
We are not forcing _any_ hardware upgrade and didn't change anything on the MP prerequisites side. Only introduced a check about...
I've been fighting for 3 nights now trying to get MP working on this computer. Right now I have the following issues:
Vista...
.....and XvidVideo.RU - ffdshow (x86/x64) also hosts the latest versions.
Tony
.....and XvidVideo.RU - ffdshow (x86/x64) also hosts the latest versions.
Tony
If you read this news (in italian) PI: FFmpeg s'incorona re del multimedia open source or if you go directly to the official...
Alright, that was a good summary!
So once I get the IR receiver to see the signals from Harmony I can follow your path to get everything else working. Thank you for your input!
So... anyone want to point me in the right direction to get the IR Receiver via Serial to recognize signals from the harmony remote?
Maybe I should...
Alright, that was a good summary!
So once I get the IR receiver to see the signals from Harmony I can follow your path to get...
TV-Server Version:
MediaPortal Version: 1.0.0.0
MediaPortal Skin: Blue3Wide
Windows Version: Vista Ultimate SP1 English...
Aperture Size or Video/Shared Memory.
Aperture Size or Video/Shared Memory.
TV-Server Version:
MediaPortal Version - 1.0.0.0:
MediaPortal Skin - Blue:
Windows Version - Vista ultimate = Microsoft...
Hi I have this great program running for some time now andin general it looks pretty solid.
One thing I cannot ge to work is :
I want to put the system in standby and wakeup from the remote.
I configured the IMON to go in standby on the power button.
I see the system go in standby and wake up almost right away.
I cannot...
Hi I have this great program running for some time now andin general it looks pretty solid.
One thing I cannot ge to work is :
I...
Hi I have this great program running for some time now andin general it looks pretty solid.
One thing I cannot ge to work is :
I...
I have configured MP to use my Digital Output for audio in Music, DVD, Movies. So I have not to manual switch from Analog speakers to Digital Out when I want to use MP as I had to do with Mediacenter. This is a great thing!
But Cause I didn't find where to set the digital audio out as default audio renderer device for MP, the menù...
I have configured MP to use my Digital Output for audio in Music, DVD, Movies. So I have not to manual switch from Analog speakers...
I have configured MP to use my Digital Output for audio in Music, DVD, Movies. So I have not to manual switch from Analog speakers...
Help installing
Hi,
I have put as many details as possible although there was no Yes option in drop down menu.
Thanks in advance for your help.
Waynesm
Help installing
Hi,
I have put as many details as possible although there was no Yes option in drop down menu.
Thanks in...
Hi,
I've configured the TV Server part and all Channels found but in the MP config I am told no card available.
Use Pinnacle 73e...