So far I've made some progress:
I tried more IR Server Suite versions, none of them works correctly - so i presume that it's drivers fault.
And after few minutes of searching in IR SS logs I've found interesting thing in file MicrosoftMceTransceiver_DriverReplacement.log:
2009-08-25 11:37:15.546875 -...
So far I've made some progress:
I tried more IR Server Suite versions, none of them works correctly - so i presume that it's...
Afternoon, ive got a Dell Remote that came with my HVR-1200, which turns out to be a Philips RC197, with a Philips OVU4120 IR USB...
Do the non-Raw pronto codes work in IRSS? That is, RC5, RC5X, RC6 and RC6A?
I was going through the source in Pronto.cs, which has the following for RC6A:
ushort customer = prontoData[5];
ushort system = prontoData[5];
ushort command = prontoData[6];
I was also able to find this pdf, which says that customer...
Do the non-Raw pronto codes work in IRSS? That is, RC5, RC5X, RC6 and RC6A?
I was going through the source in Pronto.cs, which...
Do the non-Raw pronto codes work in IRSS? That is, RC5, RC5X, RC6 and RC6A?
I was going through the source in Pronto.cs, which...
yes it blasts because it blinks the light in it. it was almost between 1-3cm while i was blasting. this variation is because it fails ir learning most of the time and i keep moving it back and forth for success. even after the successful IR learning, testing it does not change anything of the set-top-box. I tried with IR sensor stick...
yes it blasts because it blinks the light in it. it was almost between 1-3cm while i was blasting. this variation is because it...
Hi there
Just setting up a new HTPC and wanted to get IR blasting set up using my Microsoft eHome transceiver. Tried the...
The latest version of IRSS (Test Build 1.4.2.3064) just doesn't work with 64-bit Windows 7 (and probably 64-bit Windows Vista).
IR Server Suite - Test Build 1.4.2.2975 works just fine. I have attached it to this post so anyone else suffering from the hours long headache I had might get over it.
In GBPVR, the -pad option in the...
The latest version of IRSS (Test Build 1.4.2.3064) just doesn't work with 64-bit Windows 7 (and probably 64-bit Windows Vista)...
I cannot figure this out for the life of me. I open the Translator, click on the IR Commands tab, click the new button, click the...
Thank-you for that.
I ran searches on that forum too, and for the life of me, I can't imagine how I didn't find that.
Thank-you for that.
I ran searches on that forum too, and for the life of me, I can't imagine how I didn't find that.
I hope it's not offensive to ask a question about GBPVR and IRSS in here.
I have a satellite set top box, (Austar in Australia)...
Hi!
First I'd like to appolygize for the crappy english but I hope you will get the info ;)
I got an "MCE" remote but it does not use the ehome drivers. Instead it uses RTs516xIR driver and after some investigation I found out that what it does is working like a IR HID keybord.
This results in funny keybord mappings if I'm...
Hi!
First I'd like to appolygize for the crappy english but I hope you will get the info ;)
I got an "MCE" remote but it does...
Hi!
First I'd like to appolygize for the crappy english but I hope you will get the info ;)
I got an "MCE" remote but it does...
sorry bout that, reposted in the correct thread
sorry bout that, reposted in the correct thread
IR Server Suite - Test Build 1.4.2.3060
Windows Vista 64
MCE Remote
Basically it seems that i'm not getting anything from the...
I switched to XBMC! Works much nicer and the VFD works flawlessly! Problem "sloved"!
I switched to XBMC! Works much nicer and the VFD works flawlessly! Problem "sloved"!
Hi everyone,
I hope you can help me get my head arount the IRSS setup on my system. I've been using imon with Harmony remote...
Well, reason why I asked what your reasons are, is same as stated by chemelli:
They did a great job up to now and need constructive feedback. May I suggest you first supply a proper report with full logs before you revert back to a previous version please?
1.4.1
1.4.2 build 2627
Well, reason why I asked what your reasons are, is same as stated by chemelli:
They did a great job up to now and need...
Where can i find the previous version of this download? All i can see at the moment is the latest test build....
IR Server Suite is part of the MediaPortal 2 Source and is covered by the same licence.
You can use the source code, but your project must then be open source as well.
I'd prefer it if you communicated with IRSS by the TCP/IP method it uses.
If you take a look at the source code it will be very easy for you to see how this...
IR Server Suite is part of the MediaPortal 2 Source and is covered by the same licence.
You can use the source code, but your...
I'm developing an application that would like support the IR Server Suite, there's a couple of things I'd like to clear up. First...
Hello everybody!
I'm having a small problem with the MP Control Plugin. I'm not sure whether this is a bug or if it is just not designed to work as I would expect it to work, hence I'm creating this thread hoping for some help/advices or opinions.
My problem is that I want to create an action in the 'Map Buttons' section of the...
Hello everybody!
I'm having a small problem with the MP Control Plugin. I'm not sure whether this is a bug or if it is just not...
Hello everybody!
I'm having a small problem with the MP Control Plugin. I'm not sure whether this is a bug or if it is just not...
I have been trying to update the old MceIr C++ source code to simply get a service to forward the device ir codes to EventGhost (to avoid UAC issues on Vista/Win7). I've got the receive part working, but not transmit. It seems like the C++ code only does transmit for XP, not Vista. I was trying to see if the IRSS code showed how to...
I have been trying to update the old MceIr C++ source code to simply get a service to forward the device ir codes to EventGhost (to...
I have been trying to update the old MceIr C++ source code to simply get a service to forward the device ir codes to EventGhost (to...
Hi,
I'm trying to use IRSS with my Hauppauge remote, but it isn't receiving anything.
The remote works fine directly in MP, and the IRSS setup works fine with the MCE remote.
IRSS version: 1.4.2.3036
Hauppauge IR.exe version: 2.63.26308.0 (from the up-to-date WinTV 7 1.1f CD download)
TV card: Hauppauge Nova T 500...
Hi,
I'm trying to use IRSS with my Hauppauge remote, but it isn't receiving anything.
The remote works fine directly in MP...
Hi,
I'm trying to use IRSS with my Hauppauge remote, but it isn't receiving anything.
The remote works fine directly in MP...
Thanks for that.
I just wanted to know what it should do, to know whether I had it working properly or not.
Thanks for that.
I just wanted to know what it should do, to know whether I had it working properly or not.
I've built a media PC. It's always been meant as a DVR rather than a home theatre setup. I want to be able to record DVB-T and...
Hey guys I'm stumped...
I have a serial IR Reciever that I connect via a USB/Serial converter. The PC Shows it as being on COM3. In IRSS I have it setup as a USB-UIRT. I setup Translator and all worked perfectly until I rebooted...
Now my IR reciever won't light up and obviously no commands are recieved. Everything works fine in...
Hey guys I'm stumped...
I have a serial IR Reciever that I connect via a USB/Serial converter. The PC Shows it as being on COM3...
Hey guys I'm stumped...
I have a serial IR Reciever that I connect via a USB/Serial converter. The PC Shows it as being on COM3...
:thx: a lot for your offer !
See PM for details.
Simone
:thx: a lot for your offer !
See PM for details.
Simone
Hi,
i have got a problem with the ir server suite 1.4.2 and win 7 x64 (the same in vista x64).
In 1.4.1: after the...
I would like to know how I blast an IR command with the dongle...:thx:
I would like to know how I blast an IR command with the dongle...:thx:
Problem: Some buttons doesn't work
Solution: Go to the bottom of the post or if you wanna read all, start here.
----
First of...
I am having exact the same problem with the newest build of IRSS/Translator. So it seems that the patch has not been applied to the "official" builds of the suite. Are there any downloads for versions of translator with the patch applied? Or is there any other way to solve this problem?
I am having exact the same problem with the newest build of IRSS/Translator. So it seems that the patch has not been applied to the...
Hi there,
I use the Translator of the IR Server Suite to map the buttons on my remote to certain key combinations, so that I can...
Hi,
This is seems to be a great forum on all things IR blasting, but I haven't quite found out if I can do this.
Basically I only want to use my Dinovo Mini remote and not an IR remote, but still want to control my TV and amp with it.
Is this possible? I really haven't found too much info on doing this exact type of thing...
Hi,
This is seems to be a great forum on all things IR blasting, but I haven't quite found out if I can do this.
Basically I...
Hi,
This is seems to be a great forum on all things IR blasting, but I haven't quite found out if I can do this.
Basically I...
Okay, reviveing this thread once again. Do I have to map out all the buttons or am I going about this the wrong way.
EDIT:::::
got it. thank you for this. HTPC coming right along...:D
toozit
Okay, reviveing this thread once again. Do I have to map out all the buttons or am I going about this the wrong way...
I get this error when I try to enter the configuration for the MCE Replacement plugin:
"Failed to register for MCE remote button...
I have the same problem with MCE Remote v2.
Deleting of registry keys which was recommended in another thread here doesn't work for me.
I have the same problem with MCE Remote v2.
Deleting of registry keys which was recommended in another thread here doesn't work...
Hi,
I'm trying make me HTPC learing commands from my remote, but all the time I get the time out error.
I have installed the...
I'm no expert, but I think the MacroEditor might help you achieve your goals.
See: IRServerSuite/MacroEditor - MediaPortal Manual Documentation
Or EventMapper: http://wiki.team-mediaportal.com/IRServerSuite/MP%20Control%20plugin/Event%20Mapping
Or: http://wiki.team-mediaportal.com/IRServerSuite/MP%20Blast%20zone
Well, RTM yourself...
I'm no expert, but I think the MacroEditor might help you achieve your goals.
See: IRServerSuite/MacroEditor - MediaPortal Manual...
Hi Guys,
I use the IR Suite for controlling my foxtel STB - and thank you sooo much for this plugin!
I'm trying to see if...
@ Leodido
could you please give mit a little FAQ to get the remot working with MP?
@ Leodido
could you please give mit a little FAQ to get the remot working with MP?
Hi,
I recently bought a Z Cinema sound system from Logitech, this kit comes with an apparently MCE compatible remote control...
Edit: Fixed in the newer version. thanks.
Edit: Fixed in the newer version. thanks.
Hey,
I keep getting this error when trying the macros and they don't work inside MediaPortal either. The error doesn't say much...
Okay, I"m going to try and details this as best one can, because quite frankly I am confused.
First things first, I have removed all previous versions of IRSS (even through User\AppData) and have successfully installed the latest IRSS 3009 with the "IR Server.exe" rather than the "IRSERVICE" as I am using an HID IMON device. The...
Okay, I"m going to try and details this as best one can, because quite frankly I am confused.
First things first, I have...
Okay, I"m going to try and details this as best one can, because quite frankly I am confused.
First things first, I have...
Documentation is poor and support is non-existent.
Too bad, such a great program too. :(
Documentation is poor and support is non-existent.
Too bad, such a great program too. :(
Hey guys I need some help, im starting to realize how powerful this program is. Just some questions:
Is it possible to use skin...
HIP does not work on Win 7 for me... not even with Keyboard plugin, and not mce....
GJM: Use Translator for this:
I think what I need to do is to have the "INFO" button function as a "RIGHT CLICK" on the mouse - any ideas how to map that? If I can do that I will be done !!
HIP does not work on Win 7 for me... not even with Keyboard plugin, and not mce....
GJM: Use Translator for this:
I think...
I have an HP (hewlett packard) MCE Remote, and some of the buttons don't seem to do anything in MP.
I'm guessing its because...
I know about auto-login, exactly this is what i don't want !
I will be able to login via remote controll.
I know about auto-login, exactly this is what i don't want !
I will be able to login via remote controll.
Hi,
i used the translator.exe and assgined some key actions.
If i'm logged in and the translator is running, all actions are...
Thanks, I'll try again here in a few days.
FWIW, I had to uninstall IRSS so that my remote WOULD work within MP. For some reason it stopped working in MP. At first, after I had installed IRSS, my remote would still work in MP. But I must have changed something in IRSS to make it stop working. I recall playing with the IRSS plugin...
Thanks, I'll try again here in a few days.
FWIW, I had to uninstall IRSS so that my remote WOULD work within MP. For some reason...
Hi Aaron
Thanks for the IR-Server Suit you mailed me.
I have the stable version 0.2.3.0 (no SVN) - and have been using the...
yep. that was it. Thanks for the quick answer. it's now working perfect :D
yep. that was it. Thanks for the quick answer. it's now working perfect :D
After I accidentally disabled the MP crontrol plugin in the mediaportal configuration app it has disappeared.
I have tried to...