With a bit of mucking around it's worth noting that I did get some of the key MPTVClient tool classes to compile under mono.
This allows me to connect to the server; launch a channel and run MPlayer to watch telly under linux; so a cut down client can be done.
If you're interested in some coding.. there's hope.
Cheers
erosco
With a bit of mucking around it's worth noting that I did get some of the key MPTVClient tool classes to compile under mono...
Thanks, etheesdad. I'll check out your links.
I want to add that I am receiving the HDTV signal from an antenna, not cable. The reason I bring this up is because some of my other channels don't exhibit the same problem. Tomorrow, I'm going to go out and buy a outdoor HDTV antenna to see if this solves the studdering problem...
Thanks, etheesdad. I'll check out your links.
I want to add that I am receiving the HDTV signal from an antenna, not cable. The...
Hello All;
I am using Media Portal to record live video from the Silicon Dust HDTV and from a Hauppauge DVR. So far, things seem...
Hi,
Attach all logs after a reboot & a test where it fails, i'll have a look when it's attached.
My card works fine now(as PD said i had some bad soldering on the mounting bracket, typical design failure), but for the moment i have disabled one of the tuners(not needed since stress testing other stuff) & it's even running on vista...
Hi,
Attach all logs after a reboot & a test where it fails, i'll have a look when it's attached.
My card works fine now(as PD...
I've recently built a new HTPC for my parents and the software that came with the TV Card (Terratec 2400i DT) is awful. The display...
Hey there leeuwtje, and welcome to the wonderful world of MediaPortal.
1) yes. Depending on how your system is set up, you should be able to go into the MPconfig utitlity on your machine running MP and point it to your network drives. Many people here use networks of various sorts.
2) MediaPortal can use ffdshow or any other...
Hey there leeuwtje, and welcome to the wonderful world of MediaPortal.
1) yes. Depending on how your system is set up, you should...
Hi all,
Im new to the htpc hype (building on this moment a htpc) and i have a few questions. Maybe they are allready on the...
I backed up my copy of Daredevil (the 2 disc set) as an .iso file. When I go to play the movie in Mediaportal, I got a screen from the disc saying that the Parental level of the player has been set - Press Yes or Stop to continue. When I press Yes, It gives me another screen saying that it can't play the movie due to parental...
I backed up my copy of Daredevil (the 2 disc set) as an .iso file. When I go to play the movie in Mediaportal, I got a screen from...
I backed up my copy of Daredevil (the 2 disc set) as an .iso file. When I go to play the movie in Mediaportal, I got a screen from...
Excellent, thats great thank you very much
a few more questions:
1)
If i wanted to move a mediaportal install with config etc to another machine or back it up for redeployment at a later datr, what files would I need to copy?
C:\ProgramData\Team MediaPortal
C:\Program Files (x86)\Team MediaPortal
any others?
2)
Is there an easy...
Excellent, thats great thank you very much
a few more questions:
1)
If i wanted to move a mediaportal install with config etc to...
Hi all,
I currently run my mediaportal install from my pc which is connected to my tv. However sometimes I would like to use my...
whoops! I did try that, but I think its cap sensitive (or maybe I'm just a bit too stoopid!!)
Anyway I've got the TV part working (yay!!) but no picture! man I must be the biggest pain in the ass to you guys! Sorry!
I've installed the patch to sort the DVB-t stick. And I can find all the channels, but there is no picture and it...
whoops! I did try that, but I think its cap sensitive (or maybe I'm just a bit too stoopid!!)
Anyway I've got the TV part working...
Hi All
Well first off nice program. And for free!! wow!
Anyway so a mate told me about MP so I put it on my work PC to try...
A week ago I have come across a keystroke (Shift+1) that shows all kinds of info about the video you are displaying at that point. It shows frames per seconds, resolution, etc.
Because I was working a refresh-rate profiles, i was using this feature. While playing back a 1080p movie, I saw that the resolution displayed in this tool...
A week ago I have come across a keystroke (Shift+1) that shows all kinds of info about the video you are displaying at that point...
A week ago I have come across a keystroke (Shift+1) that shows all kinds of info about the video you are displaying at that point...
You can play music files continuously by pressing play on the album sleeve an not by entering the album an playin individual tracks, e.g. If i go to music... Abba, and press play on remote or P on the keyboard, ON the album sleeve, it'l play the whole album, rather than clicking into the album an hitting play inside it.
You can play music files continuously by pressing play on the album sleeve an not by entering the album an playin individual...
Hi
How to play next/previous when i play music and when i play mms-streaming pls. I tried both F7/F8 and n/p mapping to the remote...
Is it possible to view the extra informational details in photo's, when viewing in the MY Pictures Slide Show.
e.g. When picture properties are edited showing:
Title
Subject
Author
Comments
Is there a liltle graphical interface displaying these details???
Is it possible to view the extra informational details in photo's, when viewing in the MY Pictures Slide Show.
e.g. When picture...
Is it possible to view the extra informational details in photo's, when viewing in the MY Pictures Slide Show.
e.g. When picture...
Just a note on the builtin classic tv engine vs using tv server, I had been running with the builtin tv for a while, but decided to reinstall MP and used the tv server. To me using the tv server seems a lot faster than using the builtin tv.
Just a note on the builtin classic tv engine vs using tv server, I had been running with the builtin tv for a while, but decided to...
I am building a "mini HTPC" using Media Portal. It will be a low-spec machine (single seat) which should cope fine with standard...
Ok, but as mentioned one card with two tuners might be able to do the same job but I am not 100% sure, also I do not know if you'll need a 2nd subscription to your satelite company.
Ok, but as mentioned one card with two tuners might be able to do the same job but I am not 100% sure, also I do not know if you'll...
Hello all
I will be moving house soon and I'm already a mediaportal user. Currently i have the HTPC in the lounge running MP...
Well, my 19" has a res. of 1280x1024 (4:3/non widescreen). This equals (1280x1024) about 1 300 000 pixels --> 1.3 MP.
As I said before, DVD's are SD, meaning no more than about 500 000 pixels --> 0.5 MP
Well, my 19" has a res. of 1280x1024 (4:3/non widescreen). This equals (1280x1024) about 1 300 000 pixels --> 1.3 MP.
As I said...
I am just starting to copy my dvd's onto my harddrive. I have a few iso's, and a few VIDEO_TS folders. Not sure what retains...
I've trouble in russian's font. Its isn't visible! I can't add to playlist folders who named on russian.
And some letters discs doesn't visible in browser. Thanks.
I've trouble in russian's font. Its isn't visible! I can't add to playlist folders who named on russian.
And some letters discs...
I've trouble in russian's font. Its isn't visible! I can't add to playlist folders who named on russian.
And some letters discs...
ok Thx for the answer.
Although this feature in power cinema is a primitive feature i.e the plugin just take a snapshot of those 12 channels and show those pictures in GUI with an update period of some seconds, it still is very useful feature. Maybe a new challenge for an MP Developer?
ok Thx for the answer.
Although this feature in power cinema is a primitive feature i.e the plugin just take a snapshot of those...
Is there a way to watch (or preview) all tv channels togethter? Like this one from power cinema with 12-channel preview...
Hi,
I've just set up MediaPortal and think it's excellent. However, I was wondering if there is any way to play media and, when the current item is finished, have it move onto the next item and play that automatically?
For example, if I'm on list view in my "Simpsons" video folder and the list is as follows...
< S01E01 >...
Hi,
I've just set up MediaPortal and think it's excellent. However, I was wondering if there is any way to play media and...
Hi,
I've just set up MediaPortal and think it's excellent. However, I was wondering if there is any way to play media and...
I guess the webEPG could work over dial up. Program the modem to dial at 5am or something and then tell the grabber to go to work at that time.
But yeah, as hbryce says, you should also get the TV guide via the digital tv signals.
As for the movie art, you can make your own by adding folder.jpg files to each directory.
Hope...
I guess the webEPG could work over dial up. Program the modem to dial at 5am or something and then tell the grabber to go to work...
What if.... I wanted to deploy a Media Portal application on a HTPC in a rural area that has yet to get broadband internet...
hey there and welcome to MP.
For your first question, there are a couple of process plugins that monitor the music shares. Go to the plugin section and there is musicshare watcher and one other. I am at work and going from memory here, but it's something like that. This section is where you can specify what time the scan should...
hey there and welcome to MP.
For your first question, there are a couple of process plugins that monitor the music shares. Go...
Hey all,
I am new to Media Portal. It works much better then the windows MCE what i used before. But....
i've got 2...
Hi
I use both the Moving Pictures plugin and the built-in Video database of MediaPortal. After getting all the information for your collection the My Video's section will allow you to change view and I think you after genre. This should show you all of your "comedy" collection etc.
Hi
I use both the Moving Pictures plugin and the built-in Video database of MediaPortal. After getting all the information for...
hi
first of all i'd just like to say what a great piece of software media portal is! after just outputting my laptop to the tv...
use "tv series" plugin to get info in tv series. need to follow common sense naming conventions. I use lupas rename for series that do not utilise them.
http://code.google.com/p/mptvseries/
http://rename.lupasfreeware.org/
get latest Moving Pictures plugin here
http://code.google.com/p/moving-pictures/
If u prefer not to use...
use "tv series" plugin to get info in tv series. need to follow common sense naming conventions. I use lupas rename for series that...
Keep in mind I have almost everyting set to default, as I am new. I am using PowerDVD and Virtual Drive to play ripped ISO's...