The problem was solved in the german support board.
In case anyone has the some problem:
I had do uncheck the Dolby Digital (AC-3) Checkbox in Properties -> Audio Properties of my LAV Settings (Icon in Config Panel behind the LAV Audio Decoder Selection.
Best regards
Hotkey
The problem was solved in the german support board.
In case anyone has the some problem:
I had do uncheck the Dolby Digital (AC-3)...
Hi all,
i've updated to MP 1.6 today and since then have trouble with the audio in some movies. Im using MP attached to an...
I'm new to MediaPortal and HTPC in general, and this is my 1st iteration build that's currently running:
- Based on a HP DC7900 box off eBay
- CPU Intel E8400
- 6GB RAM
- AMD R7 240 discrete graphics outputting video & audio over HDMI to a Samsung full-HD TV (The integrated DisplayPort has no digital audio capability hence the...
I'm new to MediaPortal and HTPC in general, and this is my 1st iteration build that's currently running:
- Based on a HP DC7900...
I'm new to MediaPortal and HTPC in general, and this is my 1st iteration build that's currently running:
- Based on a HP DC7900...
I use LAV Audio (part of CCCP codec pack) for decoding audio and it works in Media Player Classic, but when I play the same mkv file with a FLAC 2.0 audio track inside MediaPortal (in Moving Pictures), there is no audio. Any ideas?
Someone had a similar problem, which was not resolved...
I use LAV Audio (part of CCCP codec pack) for decoding audio and it works in Media Player Classic, but when I play the same mkv...
I use LAV Audio (part of CCCP codec pack) for decoding audio and it works in Media Player Classic, but when I play the same mkv...
I've been using MediaPortal for about a month now and quite like it. I watch a lot of anime and anime is best viewed with MadVR, xy-vsfilter (or xy-subfilter,) MPC-HC(or MPC-BC,) and LAV; however, I only need to use that setup when I watch anime. I don't need nor want that when I watch TV shows or movies with MP-tvseries or Moving...
I've been using MediaPortal for about a month now and quite like it. I watch a lot of anime and anime is best viewed with MadVR...
I've been using MediaPortal for about a month now and quite like it. I watch a lot of anime and anime is best viewed with MadVR...
Sorry can you just explain the log situation a bit better, which log file would be relevant? Mepo (and it's plugins) create quite a few.
Sorry can you just explain the log situation a bit better, which log file would be relevant? Mepo (and it's plugins) create quite a...
Hi,
I wanted to ask if there is a way to play a H265 video file in MediaPortal?
I found no thread about HEVC at all. So is there...
I upgraded and it did not help the issue. What I ended up doing was reinstalling windows from scratch because the SSD decided to crap out anyway.
Now everything appears to be working, but I am still baffled as to the root cause of the exception.
Matt
I upgraded and it did not help the issue. What I ended up doing was reinstalling windows from scratch because the SSD decided to...
Hey Guys,
I started getting this exception in the Pandora plugin. I posted something there, but no response, so I am wondering if...
Hello
For future updates could put raw codec to see photographs?
thanks
Hello
For future updates could put raw codec to see photographs?
thanks
Hello
For future updates could put raw codec to see photographs?
thanks
- Locked
Please do not cross-post. If you want the original thread to be moved, please ask in that thread. I'm closing this thread.
Please do not cross-post. If you want the original thread to be moved, please ask in that thread. I'm closing this thread.
I'm having a black screen when watching live TV or video as a normal user (no admin privileges). As an administrator, everything is...
Additional addendum, no changes made but after trying to play a multi part file, IE CD1 CD2 CD3, etc the external player stopped popping up after the MP popup window came up asking which disc to play. After that point the internal player started playing all the files.
The trend that I'm seeing here is that once you get a popup...
Additional addendum, no changes made but after trying to play a multi part file, IE CD1 CD2 CD3, etc the external player stopped...
Okay, I'm about at the end of my rope on this one. I prefer MediaPortal over XBMC at this point in time, however I'm having an...
So I am not getting forced subs to be shown without right clicking and choosing them in mediaportal. Here is a screen shot showing of LAV showing them being used, but they arent unless I right click and choose them in MePo. I hope this is the log that is needed.
So I am not getting forced subs to be shown without right clicking and choosing them in mediaportal. Here is a screen shot showing...
So I am not getting forced subs to be shown without right clicking and choosing them in mediaportal. Here is a screen shot showing...
I'm having the same issue. There are no bitstream options in the lav settings. 'm using MP 1.6.0 and lav 0.59.1. I have it on direct sound decoder. Still getting PCM only. Any thoughts?
Edit: I was in the LAV video section, not the audio section, checking all bitstream options fixed my problem.
I'm having the same issue. There are no bitstream options in the lav settings. 'm using MP 1.6.0 and lav 0.59.1. I have it on...
For some reason I cannot get anything besides PCM using LAV audio filters (Mp 1.4 and LAV 0.58)
I have a reciver which supports all...
Hi All,
I've recently switched from using TMT player to using the internal BLuray player and have been setting up using MPAR etc
I need to sort the audio sync and am adjusting the audio delay...only I find it hard to sync when I'm having to shut MP(1.5) down , change settings, restart, watch etc
Is there a dynamic method I can use...
Hi All,
I've recently switched from using TMT player to using the internal BLuray player and have been setting up using MPAR etc
I...
Hi All,
I've recently switched from using TMT player to using the internal BLuray player and have been setting up using MPAR etc
I...
Is it possible to get a sample of one of the .rmvb files please ? (10s would be fine)
Is it possible to get a sample of one of the .rmvb files please ? (10s would be fine)
Since upgrading from Mepo 1.23, it took nearly 20 second to start playing any RMVB files.
How do we change RMVB playback to other...
Use MPC-BE standalone filters http://www.xvidvideo.ru/component/docman/doc_details/9097-standalone-filters-mpc-be-1030-x86.html
http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Win32/MPC-BE%20Win32%201.2.0.3/
Use MPC-BE standalone filters http://www.xvidvideo.ru/component/docman/doc_details/9097-standalone-filters-mpc-be-1030-x86.html...
Hi all,
I've been using the PowerDVD codec for some time and it worked well up to now, but meanwhile I experienced problems with...
Exactly the same comments as for Gerd.
Use the patch as recommended by Holzi (which is included as standard in MP 1.5 - so actually MP 1.5 will be better than MP 1.4 for XP) and if you still have problems, go back to MP 1.3.
I note that you have strange codec issues going on in the log files posted in the other thread.
You've...
Exactly the same comments as for Gerd.
Use the patch as recommended by Holzi (which is included as standard in MP 1.5 - so...
I had MP 1.2.3 (with Streamed MP) working perfectly, I was using LAV filters for everything. I didn't even bother to enable the...
Added to our bug tracker:
https://issues.team-mediaportal.com/browse/MP1-4158
Added to our bug tracker:
https://issues.team-mediaportal.com/browse/MP1-4158
I'm confused as to why I'm getting the Unable to play:Index error when trying to play a physical Blu-Ray disc. Isn't that a...
I solved it by using wmplayer plugin. :)
Thanks for all your help kiwijunglist.
I solved it by using wmplayer plugin. :)
Thanks for all your help kiwijunglist.
Hi,
I am using the "internal dshow player" in the Music section. No I have two questions:
- How does MP build the dshow graph...
...or just carry on using MP 1.3.0 on the XP clients.
...or just carry on using MP 1.3.0 on the XP clients.
Hi,
not sure where to post since no further MP releases are planned for XP...
My problem is: I get no dvb-t subtitles in MP...
Ok. I have reposted in LMH forum.
Ok. I have reposted in LMH forum.
System: New Asus CM1745, AMD A8-5500, windows 8.
Codecs: video: Cyberlink Power DVD13 DXVA enabled, audio: LAV, splitter: LAV...
Good to hear that the issue is solved. I just keep wondering why many of the pro audio HW devices have so bad drivers that they wont support even driven mode (which is more glitch resistant as it gets the buffer filling requests directly from the audio HW, not by the renderer's polling - this applies to all applications, not just MPAR).
Good to hear that the issue is solved. I just keep wondering why many of the pro audio HW devices have so bad drivers that they...
When i start a movie i get nothing but crackles and pops when i fast forward any amount of time the audio suddenly works again fine...
I tried to use Media Portal Renderer as sound renderer for TV, configured 5.1 , and even forced up/downmix.
Still - stereo tv strems are stereo.
Music (BASS engine) gives proper upmix.
how can I fill all speakers with TV sound ?
I tried to use Media Portal Renderer as sound renderer for TV, configured 5.1 , and even forced up/downmix.
Still - stereo tv...
I tried to use Media Portal Renderer as sound renderer for TV, configured 5.1 , and even forced up/downmix.
Still - stereo tv...
It's a tick box under 'Codecs for HW decoding' (see your image in the first post) - when it is not ticked LAV will use software decoding for that video type.
It's a tick box under 'Codecs for HW decoding' (see your image in the first post) - when it is not ticked LAV will use software...
Hi all,
I installed MP1.3.0 and included LAV filters V0.56. All videos play fine, except VC1.
On screen, the message "Unable to...
yeah use YbCbCr at 24hz
BTW - the tv won't always detect changes sometimes you have to unplug and replug or restart pc+tv. I'm guess you have to trigger a new "EDID handshake"
yeah use YbCbCr at 24hz
BTW - the tv won't always detect changes sometimes you have to unplug and replug or restart pc+tv. I'm...
Hi all,
i'm not quite sure if this is the correct forum-section to ask, hopefully it fits:
I've a Philips 3D capable TV...
What is your vsync setting in CCC? (It's under 3D)
Are you using VMR9 renderer? (It's under MP Config->Codecs & Renderers)
Do you have dropped frames? How many. (Shift+1, post screenshot)
What is your vsync setting in CCC? (It's under 3D)
Are you using VMR9 renderer? (It's under MP Config->Codecs & Renderers)
Do you...
I got lots of problems (horizontal tearing/image that's only noise with subtitles) after installing MP1.4.0
MP 1.4.0 brought LAV...
Hi,
thank you for the suggestions. I'll test both the next days and report the results.
Hi,
thank you for the suggestions. I'll test both the next days and report the results.
Hi,
is it possible to convert PCM to AC3 with LAV. I want convert all PCM-Sound (MPEG from TV) to AC3, but if the broadcaster sends...
symbolic link might be a solution for you then (if you don't want to edit database)
just select the virtual mp4 file with my videos for external STB playback, while you still have full database support for the original .ts which will also use the internal player.
use mklink to auto create symlinks after each recording with a...
symbolic link might be a solution for you then (if you don't want to edit database)
just select the virtual mp4 file with my...
Is there a way to play recorded TV with external player?
I have external player set up and it works fine with movies, but...
This was what I was looking for. Thanks a lot. I remembered there was something like that, but I could not find it.
Is there list of shortcuts like that somewhere? I looked everywhere.
This was what I was looking for. Thanks a lot. I remembered there was something like that, but I could not find it.
Is there list...
Is there a way to see which codecs exactly is MP using while playing video?
I have done some further tests here and, if you start a movie and make sure you press straight on the remote and that it says straight and not 5 channel stereo enhanced, now the surround should be working for movies as you have seen already.
Next go and play a tv channel and hit the sur. decode so it says pro logic ||. Now when you go...
I have done some further tests here and, if you start a movie and make sure you press straight on the remote and that it says...
Hi,
I am a long time user of mediaportal but the one thing I have really not tinkered much with is the Codec section - primarily...
Hello
I noticed bad sound quallität in MediaPortal to know why I try Lav audio and ffdshow audio (newest svn build) and I noticed that on sky cinema or other channels only 77kbps as input, these channels broadcast their films and broadcasts with 384kbps (Dolby digital), why do I see only 77?
Hello
I noticed bad sound quallität in MediaPortal to know why I try Lav audio and ffdshow audio (newest svn build) and I noticed...
Hello
I noticed bad sound quallität in MediaPortal to know why I try Lav audio and ffdshow audio (newest svn build) and I noticed...
Hello Neil
First, thanks for posting the log files - it is much appreciated! (y)
There don't appear to be any errors in the log file either, which is interesting.
It looks like the video format is DX50 - DivX - which I think LAV supports.
Strange.
Need some code experts to take a look...
mm
Hello Neil
First, thanks for posting the log files - it is much appreciated! (y)
There don't appear to be any errors in the log...
I have the LAV codes installed but some AVIs, when launched, do absolutely nothing - no video, no audio, no error. I am just...