I'm using MPAR for audio render and have it configured according the 'perfrect playback guide' (https://forum.team-mediaportal.com/threads/guide-perfect-playback-display-calibration.119610/#post-1001745). But i have two speakers connected at bi-amp and have a subwoofer.
In my opinion it is a 2.1 configuration, but i only can select...
I'm using MPAR for audio render and have it configured according the 'perfrect playback guide'...
I'm using MPAR for audio render and have it configured according the 'perfrect playback guide'...
I can't find anything about this error. Should I report it?
I can't find anything about this error. Should I report it?
I have just installed Media Portal to replace my WMC7 HTPC.
I just can't get the DVD to resume playing.
I have tried to install...
Thanks for the hints!
After one day of full immersion in different solutions, the issue has been solved thanks to the installation of SAF (http://hobring.esero.net/saf/binary/)! :cool:
No necessity to install PowerDVD to use its codecs. I'm going to change the title of the thread removing [BUG?]...in fact nothing related to...
Thanks for the hints!
After one day of full immersion in different solutions, the issue has been solved thanks to the installation...
Hello All,
To watch live TV I have set PowerDVD codec for both standard and HD transmissions. With a big surprise, using...
Solution:
Uncheck "Exclusive Mode" in iMon Manager under Imon Utilities/Application Launcher
Solution:
Uncheck "Exclusive Mode" in iMon Manager under Imon Utilities/Application Launcher
Hi
I am using a HTPC case with the Soundgraph iMon remote and software.
It all works good in Mediaportal. However I want to play...
Just try both on your setup and compare. I'd say it depends on you and your equipment. I definitely hear the difference on my setup even without reencoding to ac3 by just using mpar with multichannel vs bitstreaming. Now I only use mpar with files without ac3, dts, etc.
Just try both on your setup and compare. I'd say it depends on you and your equipment. I definitely hear the difference on my setup...
i usually tick the relevant options in lav audio config to bitstream all audio except true hd and dts hd as my amplifier does not...
I rolled back to 1.5 and my system is working properly again. Not sure what the issue is in 1.6 but at this point I will be very selective if I decide to upgrade again.
I rolled back to 1.5 and my system is working properly again. Not sure what the issue is in 1.6 but at this point I will be very...
I have been using Media Portal for several years now but with latest update to 1.6 I am getting random issues with audio output no...
I'm having the same issue. There are no bitstream options in the lav settings. 'm using MP 1.6.0 and lav 0.59.1. I have it on direct sound decoder. Still getting PCM only. Any thoughts?
Edit: I was in the LAV video section, not the audio section, checking all bitstream options fixed my problem.
I'm having the same issue. There are no bitstream options in the lav settings. 'm using MP 1.6.0 and lav 0.59.1. I have it on...
For some reason I cannot get anything besides PCM using LAV audio filters (Mp 1.4 and LAV 0.58)
I have a reciver which supports all...
I believe you, and in any event, Thanks. Is it possible that whoever wrote the SD plugin, knowing what you said above about TV server supporting 3 of each type, mapped SPDIF#3 in the dropdown box to SPDIF#2 on the Colossus? When I went back an tried again, both #2 and #3 worked when I set them on a channel.
Anyway, thanks again...
I believe you, and in any event, Thanks. Is it possible that whoever wrote the SD plugin, knowing what you said above about TV...
I have just installed MP. I have setup my Colossus and video is working fine with most codecs. TV Audio however is not. I have...
That's ok! I can live with your explanation! :D
That's ok! I can live with your explanation! :D
Hi All,
I'm actually using PowerDVD codecs for liveTV/TV recordings and I have one question about the related settings in...
When I play a 3D mkv using the over-under format in my downstairs MediaPortal PC. When the video plays, you can see a vertical line down the middle, due to the video being split up slightly. In other words, if you turn off the 3D you will see the video gets split into 4 corners. It's only a few pixels displaced up and down.
This...
When I play a 3D mkv using the over-under format in my downstairs MediaPortal PC. When the video plays, you can see a vertical line...
When I play a 3D mkv using the over-under format in my downstairs MediaPortal PC. When the video plays, you can see a vertical line...
Hello all,
does anyone know how I can configure MediaPortal 1.6 so that when I insert a Blu-ray my external player PowerDVD is started while when inserting a DVD the MediaPortal internal player is used?
Thanks,
Hella
Hello all,
does anyone know how I can configure MediaPortal 1.6 so that when I insert a Blu-ray my external player PowerDVD is...
Hello all,
does anyone know how I can configure MediaPortal 1.6 so that when I insert a Blu-ray my external player PowerDVD is...
The problem was solved in the german support board.
In case anyone has the some problem:
I had do uncheck the Dolby Digital (AC-3) Checkbox in Properties -> Audio Properties of my LAV Settings (Icon in Config Panel behind the LAV Audio Decoder Selection.
Best regards
Hotkey
The problem was solved in the german support board.
In case anyone has the some problem:
I had do uncheck the Dolby Digital (AC-3)...
Hi all,
i've updated to MP 1.6 today and since then have trouble with the audio in some movies. Im using MP attached to an...
I'm new to MediaPortal and HTPC in general, and this is my 1st iteration build that's currently running:
- Based on a HP DC7900 box off eBay
- CPU Intel E8400
- 6GB RAM
- AMD R7 240 discrete graphics outputting video & audio over HDMI to a Samsung full-HD TV (The integrated DisplayPort has no digital audio capability hence the...
I'm new to MediaPortal and HTPC in general, and this is my 1st iteration build that's currently running:
- Based on a HP DC7900...
I'm new to MediaPortal and HTPC in general, and this is my 1st iteration build that's currently running:
- Based on a HP DC7900...
Yes! It's a separate setting that doesn't appear in the mixer normally, and I never noticed that! I must have pressed volume down inside MediaPortal at one point and it stayed that way (I normally only use the Windows volume and the receiver volume controls). That would also explain why I haven't heard button clicks in the GUI lately...
Yes! It's a separate setting that doesn't appear in the mixer normally, and I never noticed that! I must have pressed volume down...
MediaPortal Version: 1.2.0
MediaPortal Skin: StreamedMP
Windows Version: Windows 7 x64 SP1
CPU Type: Intel Celeron G530
HDD: Intel...
I use LAV Audio (part of CCCP codec pack) for decoding audio and it works in Media Player Classic, but when I play the same mkv file with a FLAC 2.0 audio track inside MediaPortal (in Moving Pictures), there is no audio. Any ideas?
Someone had a similar problem, which was not resolved...
I use LAV Audio (part of CCCP codec pack) for decoding audio and it works in Media Player Classic, but when I play the same mkv...
I use LAV Audio (part of CCCP codec pack) for decoding audio and it works in Media Player Classic, but when I play the same mkv...
I've been using MediaPortal for about a month now and quite like it. I watch a lot of anime and anime is best viewed with MadVR, xy-vsfilter (or xy-subfilter,) MPC-HC(or MPC-BC,) and LAV; however, I only need to use that setup when I watch anime. I don't need nor want that when I watch TV shows or movies with MP-tvseries or Moving...
I've been using MediaPortal for about a month now and quite like it. I watch a lot of anime and anime is best viewed with MadVR...
I've been using MediaPortal for about a month now and quite like it. I watch a lot of anime and anime is best viewed with MadVR...
I upgraded and it did not help the issue. What I ended up doing was reinstalling windows from scratch because the SSD decided to crap out anyway.
Now everything appears to be working, but I am still baffled as to the root cause of the exception.
Matt
I upgraded and it did not help the issue. What I ended up doing was reinstalling windows from scratch because the SSD decided to...
Hey Guys,
I started getting this exception in the Pandora plugin. I posted something there, but no response, so I am wondering if...
Hello
For future updates could put raw codec to see photographs?
thanks
Hello
For future updates could put raw codec to see photographs?
thanks
Hello
For future updates could put raw codec to see photographs?
thanks
- Locked
Please do not cross-post. If you want the original thread to be moved, please ask in that thread. I'm closing this thread.
Please do not cross-post. If you want the original thread to be moved, please ask in that thread. I'm closing this thread.
I'm having a black screen when watching live TV or video as a normal user (no admin privileges). As an administrator, everything is...
Additional addendum, no changes made but after trying to play a multi part file, IE CD1 CD2 CD3, etc the external player stopped popping up after the MP popup window came up asking which disc to play. After that point the internal player started playing all the files.
The trend that I'm seeing here is that once you get a popup...
Additional addendum, no changes made but after trying to play a multi part file, IE CD1 CD2 CD3, etc the external player stopped...
Okay, I'm about at the end of my rope on this one. I prefer MediaPortal over XBMC at this point in time, however I'm having an...
So I am not getting forced subs to be shown without right clicking and choosing them in mediaportal. Here is a screen shot showing of LAV showing them being used, but they arent unless I right click and choose them in MePo. I hope this is the log that is needed.
So I am not getting forced subs to be shown without right clicking and choosing them in mediaportal. Here is a screen shot showing...
So I am not getting forced subs to be shown without right clicking and choosing them in mediaportal. Here is a screen shot showing...
Hi All,
I've recently switched from using TMT player to using the internal BLuray player and have been setting up using MPAR etc
I need to sort the audio sync and am adjusting the audio delay...only I find it hard to sync when I'm having to shut MP(1.5) down , change settings, restart, watch etc
Is there a dynamic method I can use...
Hi All,
I've recently switched from using TMT player to using the internal BLuray player and have been setting up using MPAR etc
I...
Hi All,
I've recently switched from using TMT player to using the internal BLuray player and have been setting up using MPAR etc
I...
Is it possible to get a sample of one of the .rmvb files please ? (10s would be fine)
Is it possible to get a sample of one of the .rmvb files please ? (10s would be fine)
Since upgrading from Mepo 1.23, it took nearly 20 second to start playing any RMVB files.
How do we change RMVB playback to other...
Use MPC-BE standalone filters http://www.xvidvideo.ru/component/docman/doc_details/9097-standalone-filters-mpc-be-1030-x86.html
http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Win32/MPC-BE%20Win32%201.2.0.3/
Use MPC-BE standalone filters http://www.xvidvideo.ru/component/docman/doc_details/9097-standalone-filters-mpc-be-1030-x86.html...
Hi all,
I've been using the PowerDVD codec for some time and it worked well up to now, but meanwhile I experienced problems with...
Exactly the same comments as for Gerd.
Use the patch as recommended by Holzi (which is included as standard in MP 1.5 - so actually MP 1.5 will be better than MP 1.4 for XP) and if you still have problems, go back to MP 1.3.
I note that you have strange codec issues going on in the log files posted in the other thread.
You've...
Exactly the same comments as for Gerd.
Use the patch as recommended by Holzi (which is included as standard in MP 1.5 - so...
I had MP 1.2.3 (with Streamed MP) working perfectly, I was using LAV filters for everything. I didn't even bother to enable the...
Added to our bug tracker:
https://issues.team-mediaportal.com/browse/MP1-4158
Added to our bug tracker:
https://issues.team-mediaportal.com/browse/MP1-4158
I'm confused as to why I'm getting the Unable to play:Index error when trying to play a physical Blu-Ray disc. Isn't that a...
kindly help me to open dvr card recordings n264 but showing as .mpg
kindly help me to open dvr card recordings n264 but showing as .mpg
Hi guys i have a couple of N264 video files but unabale to run on MP or MPC
i have tried install many type of codecs but no...
Excellent. :)
Sorry, I think there is probably nothing you can do.
I can only recommend to make sure that the settings here are correct:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/02_TV_Servers/5_Scan_Analog#Settings
Excellent. :)
Sorry, I think there is probably nothing you can do.
I can only recommend to make sure that the settings here are...
MediaPortal Version: 1.0.4.24281
MediaPortal Skin: x-factor
Windows Version: Windows 7 64bit
CPU Type: AMD Athlon 64 x2 5400+ -...
I solved it by using wmplayer plugin. :)
Thanks for all your help kiwijunglist.
I solved it by using wmplayer plugin. :)
Thanks for all your help kiwijunglist.
Hi,
I am using the "internal dshow player" in the Music section. No I have two questions:
- How does MP build the dshow graph...
Ok. I have reposted in LMH forum.
Ok. I have reposted in LMH forum.
System: New Asus CM1745, AMD A8-5500, windows 8.
Codecs: video: Cyberlink Power DVD13 DXVA enabled, audio: LAV, splitter: LAV...