Post problems you have when using MediaPortal,
or pre installation questions in here.
what's the best way to make a screensaver work alongside MP? i'm having difficulties
i want to use the windows screensaver in case the system is left switched on with MP switched off (i have a plasma so burn-in happens easily). also because the only option within MP is the screen blanking, but i think that blanking the screen...
what's the best way to make a screensaver work alongside MP? i'm having difficulties
i want to use the windows screensaver in case...
what's the best way to make a screensaver work alongside MP? i'm having difficulties
i want to use the windows screensaver in case...
Designed for rule based TV scheduling. It replaces the MP TVplugin. It can still use TVServer in the backgound.
Check out their website and documentation.
Also see this threads where the steps you want to do are explained.
https://forum.team-mediaportal.com/mediaportal-1-talk-45/second-mediaportal-sat-card-possible-68519/...
Designed for rule based TV scheduling. It replaces the MP TVplugin. It can still use TVServer in the backgound.
Check out their...
Hey guys,
is it possible to include the TV card of my htpc (single seat setup) in another MediaPortal (also single seat setup)...
I came across this thread because I am having the same problem with empty folders being left after older episodes are deleted. I was playing around with a script that uses the "rmdir" command and it was coming back as if the folder wasn't actually empty, and I realized that there was still a "Thumbs.db" hidden system file in the...
I came across this thread because I am having the same problem with empty folders being left after older episodes are deleted. I...
Hey guys,
I've just noticed that there are lots and lots of empty folders left behind on my recording hard drive, even after the...
You can change refresh rates (and resolutions by using the script option) using the "dynamic refresh rate" under General in configuration. There is a link to a wiki page in the configuration settings which exlpain how to do it for Ati and Nvidia cards. The Actions can be attached to script files which can provide the functions you...
You can change refresh rates (and resolutions by using the script option) using the "dynamic refresh rate" under General in...
Hi
Where do ION users stand with 1080i material?
From what I have read its not possible and not going to be possible for ION...
I don't know for sure 100%, but I would say no, this isn't possible.
It would be tricky enough getting Windows to boot and run from a BluRay disk, but getting a complex system like MP with databases and artwork caches running would be, I suspect, impossible.
I don't know for sure 100%, but I would say no, this isn't possible.
It would be tricky enough getting Windows to boot and run...
Is there a way to install MediaPortal and it's Databases onto a Blu-Ray/DVD disk so it can run completely stand alone as a self...
Hi there
I am guessing that the conflicting channels are on transponders with opposite polarities. Vertical transponders (eg. SBS, Optus D2) are selected with 13V. Horizontal transponders (eg. Sky, Freeview) are selected with 18V. Your all-ports-power-pass splitter will pass the highest voltage to the LNB, so if you are trying to...
Hi there
I am guessing that the conflicting channels are on transponders with opposite polarities. Vertical transponders (eg. SBS...
ok, so i have a problem with my dvb-s cards. one is a twinhan 878 and the other is a hauppauge 3000. the twinhan works fine until...
https://forum.team-mediaportal.com/operating-system-330/windows-7-half-fullscreen-71785/
https://forum.team-mediaportal.com/operating-system-330/windows-7-half-fullscreen-71785/
MediaPortal Version: Most Recent
MediaPortal Skin: ALL
Windows Version: 7 x64 Ultimate
CPU Type: AMD Phenon II 3ghz quad
HDD...
AW: MovingPictures to Desktop
What's wrong with [ALT]+[TAB] ?
Greets
pp
AW: MovingPictures to Desktop
What's wrong with [ALT]+[TAB] ?
Greets
pp
I am running MovingPictures (Fullscreen) in XP and what a great job it does. What I have not been able to fathom out is how I can...
Hello all,
I've recently discovered Mediaportal and have installed it on about 5 PC's so far. My latest install, my dedicated TV server, went fine. I pretty much set everything up the way I liked it. Only the TV Server needed some tuning. I didn't touch MP Config in the process. I finished the TV Server setup and now I'm stuck with a...
Hello all,
I've recently discovered Mediaportal and have installed it on about 5 PC's so far. My latest install, my dedicated TV...
Hello all,
I've recently discovered Mediaportal and have installed it on about 5 PC's so far. My latest install, my dedicated TV...
Thanks for the help so far, and for anyone who has the same problem as me and finds this thread, i posted my logs in the other thread listed above.
Thanks!
Just an update for anyone following this issue, I have posted a graph of my card filters in an attempt for the MP team to add support for the aiw9000, because it appears that...
Thanks for the help so far, and for anyone who has the same problem as me and finds this thread, i posted my logs in the other...
MediaPortal Version: 1.2.0 Alpha
MediaPortal Skin: N/A
Windows Version: XP SP3
CPU Type: AMD Athlon XP 2500+
HDD: Generic 80GB...
Hmmmmm... ask Microsoft if they can add the dialog?? Maybe a humidity sensor add on ?? ;)
Good to hear that you have it working again.
M
Hmmmmm... ask Microsoft if they can add the dialog?? Maybe a humidity sensor add on ?? ;)
Good to hear that you have it working...
Hi,
I suppose this is not a Mediaportal issue and more of a hardware issue, but I have looked everywhere else and not found...
Hi
I have the very latest version of the .net framework (version 4)installed over XP SP3, but when I try to install Media Portal, it tells me I don't have the .net framework 3.5 sp1 installed, and aborts the installation.
Please help!
:(
Ok, solved it.
Media Portal works only with .net 3.5 sp1 and no later version.
So I had to...
Hi
I have the very latest version of the .net framework (version 4)installed over XP SP3, but when I try to install Media Portal...
Hi
I have the very latest version of the .net framework (version 4)installed over XP SP3, but when I try to install Media Portal...
Hello All,
I have finally been able to get the machine to reboot outside of mediaportal.....so that just about ends this thread. But for anybody that can pass on some suggestions to a fellow MP user, i have stress tested the machine, ram, video, CPU and all turn up fine with no errors. So at this stage im guessing PSU but i will have...
Hello All,
I have finally been able to get the machine to reboot outside of mediaportal.....so that just about ends this thread...
MediaPortal Version: 1.1.2
MediaPortal Skin: StreamedMP
Windows Version: Windows 7 32bit all service packs
CPU Type: Intel i3...
I recieved my TV tuner in the post and I have just plugged it in and installed the drivers. When I loaded up MediaPortal, the TV option disappeared altogether. I thought i'd try a reinstall.
However now, the installation needs to close whilst trying to setup the TV server and this happens on both MP 1.1 and 1.2 during install. If...
I recieved my TV tuner in the post and I have just plugged it in and installed the drivers. When I loaded up MediaPortal, the TV...
I recieved my TV tuner in the post and I have just plugged it in and installed the drivers. When I loaded up MediaPortal, the TV...
Thanks Jay... I knew about the extension bit, but not about the overheating.
I'll have to keep an eye on them.
M
Thanks Jay... I knew about the extension bit, but not about the overheating.
I'll have to keep an eye on them.
M
Hi,
I'm not sure of this is in the correct section or not, so mods please move if you feel the need.
Whilst this post...
Is there any plugin that will list and play audio podcasts?
Is there any plugin that will list and play audio podcasts?
Is there any plugin that will list and play audio podcasts?
Is there any way to associate MP with media files? So i can doubleclick movie and it will start playning it in mediaportal?
Is there any way to associate MP with media files? So i can doubleclick movie and it will start playning it in mediaportal?
Is there any way to associate MP with media files? So i can doubleclick movie and it will start playning it in mediaportal?
That's good news... I could never get PowerDVD codecs to work properly. You're not alone.
That's good news... I could never get PowerDVD codecs to work properly. You're not alone.
I recently updated to MP1.1.1 and changed skin to SteamedMP at the same time. Now I have issues with all HD channels: MP usually...
Re: TV not deinterlacing
OK, so it took a bit longer than I thought, but I finally got around to putting Windows 7 on. Then spent many hours screwing around with codecs (learning about codecs :)) So for this post (I have changed back to XP so we can still watch TV in the mean time) my system has changed to:
MediaPortal Version...
Re: TV not deinterlacing
OK, so it took a bit longer than I thought, but I finally got around to putting Windows 7 on. Then spent...
EDIT: I have upgraded to W7, please see post #5
MediaPortal Version: 1.0.2
MediaPortal Skin: Blue3wide
Windows Version: XP SP3...
MediaPortal Version: 1.1.1 Final
MediaPortal Skin: StreamedMp
Windows Version: Win7 Professional 64bit
CPU Type: Intel E6750
HDD: WD 1500GB
Memory: Corsair 4Gb
Motherboard: Asus P5N32SLI-Plus
Video Card: Nvidia 8800GTX
Video Card Driver: newest
Sound Card: Onboard
Sound Card AC3: optical out
Sound Card Driver:
1. TV Card...
MediaPortal Version: 1.1.1 Final
MediaPortal Skin: StreamedMp
Windows Version: Win7 Professional 64bit
CPU Type: Intel E6750...
MediaPortal Version: 1.1.1 Final
MediaPortal Skin: StreamedMp
Windows Version: Win7 Professional 64bit
CPU Type: Intel E6750...
could've sworn I selected mysql. not ms sql. doesn't explain the video issue though. media player classic and windows media player 11 both play the dvd folders just fine. it's only a problem when running through media portal.
I'm going to blow it away and reinstall. i'll keep you posted.
could've sworn I selected mysql. not ms sql. doesn't explain the video issue though. media player classic and windows media...
MediaPortal Version: 1.1.2
MediaPortal Skin: Blue
Windows Version: XP SP3
CPU Type: Dual Core Intel Pentium D 950 3400 Mhz
HDD...
Sorry to bump the month old topic. Just saw this amazing community and after hours of trial and errors came to this thread to know about the limitation of MediaPortal to support analog tv cards with audio line out. A lot of low end TV Tuner cards are sold in India with many manufacturers like Intex, Techcom, etc; even today with the...
Sorry to bump the month old topic. Just saw this amazing community and after hours of trial and errors came to this thread to know...
I'm unable to find any channels when scanning and from the logs I can see that the filters for audio and video cannot be found...
Sure, will do.
I now have a link to the log file folder on my desktop, as it was also locking up when I clicked the "Open Log Folder" in SetupTv :wtf:
Oops, I just noticed I typed "I did include the logs" in a previous message. That was obviously a typo :ooops:
Take Care :)
Sure, will do.
I now have a link to the log file folder on my desktop, as it was also locking up when I clicked the "Open Log...
MediaPortal Version: 1.1.2
MediaPortal Skin: Blue Three Wide
Windows Version: Server: Windows 7 Enterprise; Client: Windows 7...
Assuming you've installed the drivers for the second card in Windows (sorry I know it's obvious!) and the card is shown in the TV Server setup under TV Servers -> WhateverYourServerIsCalled...
Make sure you've mapped all the channels to be available on the second card. You don't need to run a channel scan on the new card, just...
Assuming you've installed the drivers for the second card in Windows (sorry I know it's obvious!) and the card is shown in the TV...
hey guys, i just brought a second dvb-s tuner card and am having issues with not being able to record from one channel and watch...
I ment H7 from terratec with bult in CI:sorry:
I ment H7 from terratec with bult in CI:sorry:
I found an card that looks good, TERRATEC H5 USB HD DVB-T/DVB-C TV any one tested?
I don't want to buy this card if it is problem...
I have quite a few audio-books and use MyMusic to access them.
Anyway I would like the embedded image in the audio files to show as the default cover image.
I use an MP3 tagger (Tagscanner) to edit my mp3 info and I attach a cover image to each file which show fine on my cell phone, is there a way to have MP show this image instead...
I have quite a few audio-books and use MyMusic to access them.
Anyway I would like the embedded image in the audio files to show...
I have quite a few audio-books and use MyMusic to access them.
Anyway I would like the embedded image in the audio files to show...
Just a quick thanks to say this drastically sped-up my channel changing using Dvico Dual DVB-T card in Australia. Thanks !
Just a quick thanks to say this drastically sped-up my channel changing using Dvico Dual DVB-T card in Australia. Thanks !
MediaPortal Version: 1.1.0
MediaPortal Skin: Blue 3 Wide
Windows Version: Windows 7 Home Premium
CPU Type: Intel Atom 330
HDD...
MediaPortal Version: 1.1.1.0
MediaPortal Skin: StreamedMP 1.4.5.2339
Windows Version: Windows 7 (64-bit)
I have been using and tweaking for a couple weeks and I am LOVING it!
The support I have been getting from this site is great.
But now I have a problem:
In the “MediaPortal - Configuration” menu, everything is working...
MediaPortal Version: 1.1.1.0
MediaPortal Skin: StreamedMP 1.4.5.2339
Windows Version: Windows 7 (64-bit)
I have been using and...
MediaPortal Version: 1.1.1.0
MediaPortal Skin: StreamedMP 1.4.5.2339
Windows Version: Windows 7 (64-bit)
I have been using and...
Hi justplayin59
Having just switched from a CRT and using S-VHS to HDMI I am experiencing the same issue. This appears to be a problem with Windows 7 and HDMI handshaking. My understanding from a quick read is that when the HDMI device is off (receiver or TV) Windows does not know its resolution so defaults to the lowest.
There...
Hi justplayin59
Having just switched from a CRT and using S-VHS to HDMI I am experiencing the same issue. This appears to be a...
I currently have a onkyo TX-SR308, if that makes a difference. When the receiver turns off or switches inputs MP reduces in size...
That will work
That will work
MediaPortal Version: 1.0
MediaPortal Skin: Default
Windows Version: Windows Vista Ultimate SP1
CPU Type: Intel E8400
HDD: WD 1x...