UK Freeview has about 40 free to air channels, hence dual DVB-T cards useful here.
There are encrypted channels available, but only a few, which most people live without.
UK Freeview has about 40 free to air channels, hence dual DVB-T cards useful here.
There are encrypted channels available, but...
I could be asking a dumb question here, but here is goes...
I see that alot of you have 2 or 3 TV cards installed.
This is for...
YAY!! (after 72 hours) I actually got the Winfast tv 2000 xp to work!
-In MP set up go to television-then capture cards ignore unable to graph card,
then tune and use leadtek video/sp decoder
the only problem now is sound is ahead of the picture?
YAY!! (after 72 hours) I actually got the Winfast tv 2000 xp to work!
-In MP set up go to television-then capture cards ignore...
Hi, I have been trying to make an HTPC for 6 years,with no success
recently tried mediaportal with little success also.
seems my...
i have bought a new via board with cn700 last week and i have the same problem. i try the downloads and check which one of the 4 drivers to install to work properly. thx :)
i have bought a new via board with cn700 last week and i have the same problem. i try the downloads and check which one of the 4...
MediaPortal Version:
Windows Version: XP
CPU Type: VIA Esther 1500Mhz
HDD: 80gb SATA II
Memory: 512mb DDR2
Motherboard: VIA...
TV-Server Version: none
MediaPortal Version: MediaPortal-svn--07-06-2007--01-15-Rev15088
MediaPortal Skin: FOOFARAW_V1.0.6 or Bluetwo
Windows Version: Vista x64 Business
CPU Type: AMD X2 3800
HDD: 40GB for operating system and additional drives for storage
Memory: 2GB DDR
Motherboard: Gigabyte GA-K8N-SLI
Motherboard Chipset...
My current install (single seat tve3) is getting a bit old and I am about to upgrade but should I use the RC1 or the latest SVN. I am thinking the RC1 is just an older SVN just like any other so therefor I should use the latest not the RC1.
the problems I am hoping to fix are:
setting up a hybrid card stops it working (as seen in...
My current install (single seat tve3) is getting a bit old and I am about to upgrade but should I use the RC1 or the latest SVN. I...
My current install (single seat tve3) is getting a bit old and I am about to upgrade but should I use the RC1 or the latest SVN. I...
I'm getting exactly the same problem. I get TONS of these things, and it's really my only complaint about my (relatively new) MediaPortal installation. I'm running under XP SP2 as well, with two dual-tuner hauppage MC500 cards (4 tuners total). Unlike the OP, however, I'm getting them throughout the week.
They seem to correspond...
I'm getting exactly the same problem. I get TONS of these things, and it's really my only complaint about my (relatively new)...
MediaPortal Version: 0.2.2
Windows Version: Win XP SP2
CPU Type: Intel Pentium 4 M640 3.2Ghz
HDD: Maxtor SATA2 320Gb
Memory...
It is working without the descramble function, so only free to air can be viewed, but then in a beter quality as the Anysee software it self.
MP is not supporting the descramble function of this unit! it is a software layer that must be connected somehow, don't me ask how ;) its a AMT module that I know, maybe some of the super guys...
It is working without the descramble function, so only free to air can be viewed, but then in a beter quality as the Anysee...
Does this tuner work ok with mediaportal ?
http://www.anysee.com/eng/product/anyseeE30Plus.php
Can I watch scrambled...
TV-Server Version:
MediaPortal Version: 0.2.3.0 RC1
MediaPortal Skin: Blue Two Wide
Windows Version: XP Pro SP2
CPU Type: Athlon 64 X2 3800+
HDD: Seagate ST3200822AS 200GB SATA
Memory: 512MB DDR 4200 Dual Channel
Motherboard: MSI MS-7191
Motherboard Chipset: ATI RS482/SB450
Motherboard Bios: AMI V1.1
Video Card: ATI Radeon...
TV-Server Version:
MediaPortal Version: 0.2.3.0 RC1
MediaPortal Skin: Blue Two Wide
Windows Version: XP Pro SP2
CPU Type...
TV-Server Version:
MediaPortal Version: 0.2.3.0 RC1
MediaPortal Skin: Blue Two Wide
Windows Version: XP Pro SP2
CPU Type...
Just to let you know that I managed to fix this.
It is the F3 button that executes the 'Show Information' command in MediaPortal.
I found this mapping after better looking at the Keyboard assignments page of the MediaPortal Setup at the General section.
Just to let you know that I managed to fix this.
It is the F3 button that executes the 'Show Information' command in MediaPortal...
Hi,
is it possible in My Videos/Movies section of the MediaPortal to have a keyboard shortcut to the IMDB information (as this...
I'm about to set up HTPC and i know this card is supported, at least it says so on the web site, but want to know if i can watch and record different channels at the same time useing just one DVB-S card.
Most likely the hauppauge nova s-plus
Also is the analouge input side of this card supported in MP (no h/w encoder just soft...
I'm about to set up HTPC and i know this card is supported, at least it says so on the web site, but want to know if i can watch...
I'm about to set up HTPC and i know this card is supported, at least it says so on the web site, but want to know if i can watch...
This has been discussed in anothe thread too.
Seems to be a problem, when having used the "Record everytime on every channel".
https://forum.team-mediaportal.com/memory_leak_tvservice_dvb_t_radio-t24596p3.html
This has been discussed in anothe thread too.
Seems to be a problem, when having used the "Record everytime on every channel"...
0.2.3.0RC1
When haven been run for some days I often observe the system becomming unresponsive.
Task manager shows me 27MB...
Hi
im pretty new to Media Portal but after trying it for a few days i can already say it looks really promising. Ive been a dedicated MCE user but poor (well more like lack of) DVB-S support drove me to find another solution.
Ive spent a lot of time configuring it to how i want it like setting up channels an stuff. I was...
Hi
im pretty new to Media Portal but after trying it for a few days i can already say it looks really promising. Ive been a...
Hi
im pretty new to Media Portal but after trying it for a few days i can already say it looks really promising. Ive been a...
Hi did post a help on the general forum but try here.
Have just downloaded MediaPortal and have a Hauppage Nova-T USB2 (Soho) tv card,running win xp.
I go through the set up,the tv card is found but when I select the UK Crystal Palace to find the stations it crashes with a Microsoft message.
Basic questions, does it work over the...
Hi did post a help on the general forum but try here.
Have just downloaded MediaPortal and have a Hauppage Nova-T USB2 (Soho) tv...
Hi did post a help on the general forum but try here.
Have just downloaded MediaPortal and have a Hauppage Nova-T USB2 (Soho) tv...
The problem is not the driver/codec/etc. the problem is with MP for sure. Using ZoomPlayer, Media Player Classic, Windows Media Player, TVedia, etc, etc... picture is smooth, no tearing ... I hope that devs could solve it soon...
Regards,
The problem is not the driver/codec/etc. the problem is with MP for sure. Using ZoomPlayer, Media Player Classic, Windows Media...
I have a major problem with video tearing here.
When the camera is panning up/down a clearly visible horizontal tear appears...
Hey, please have a look here. This is how I got it working.
https://forum.team-mediaportal.com/irblaster_and_mix_sat_channels_and_fta-t9925.html?t=9925
Regards
Steen
Hey, please have a look here. This is how I got it working...
Hi,
I want to use my satellite box in MediaPortal, but how do you guys connect it to your MediaCenter??
Do I need a special...
Hello again!
Finally late last night I got this working :-) The trick was the combination of several things...
1. Update the dvbt.xml file to include the 6th mux for the Stockholm area. It is on 730MHz. This s not very well advertised and it took me a while to figure out where SVT-HD is hidden...
Now you should get a lock on two...
Hello again!
Finally late last night I got this working :-) The trick was the combination of several things...
1. Update the...
Hello everyone,
I've tried to get MP to display the new SVT-HD channel distributed as DVB-T. When I scan it finds the channel...
should have tried the latest SVN before I posted. My problems went away once I installed the latest SVN. Been trying SVN's for a week with the same issue and as soon as I post...it starts working (go figure).
soo...to the Devs...Thanks for fixing that if it was a bug...if not...thanks anyway for the great work ;)
should have tried the latest SVN before I posted. My problems went away once I installed the latest SVN. Been trying SVN's for a...
MediaPortal Version: 0.2.3.0 RC1
MediaPortal Skin: BlueTwo Wide
Windows Version: Vista x86
CPU Type: A64 x2 4000+
HDD: 1x80Gb...
TV-Server Version:
MediaPortal Version: V0.2.2.0
MediaPortal Skin: original
Windows Version: Windows XP SP2
CPU Type: A64 X2 3600+
HDD: Samsung SATA 400GB
Memory: 1x 1024MB DDR2 667
Motherboard: ASUS M2NPV-VM
Motherboard Chipset: nForce430
Motherboard Bios: newest
Video Card: built-in (Geforce 6150)
Video Card...
TV-Server Version:
MediaPortal Version: V0.2.2.0
MediaPortal Skin: original
Windows Version: Windows XP SP2
CPU Type: A64...
TV-Server Version:
MediaPortal Version: V0.2.2.0
MediaPortal Skin: original
Windows Version: Windows XP SP2
CPU Type: A64...
Hi
Different volume levels TV/Music:
having some troubles with my audio levels. Watching TV on a hauppauge 150mce has one low audiolevel, I'm using ffdshow with the mixer set to 5.1 (if this could have any influence), while listening to music with the bassplayer has another much higher volume. Is there anything that I can do...
Hi
Different volume levels TV/Music:
having some troubles with my audio levels. Watching TV on a hauppauge 150mce has one low...
Hi
Different volume levels TV/Music:
having some troubles with my audio levels. Watching TV on a hauppauge 150mce has one low...
Hi
I am a newby. I have a Twinan Vision Plus DVB S card and MediaPortal finds it OK, but when I try to configure it I cannot find any optioon for the PAS 8 Ku satellite whidh has the SelectTV service. How do I configure for that satellite?
Hi
I am a newby. I have a Twinan Vision Plus DVB S card and MediaPortal finds it OK, but when I try to configure it I cannot...
Hi
I am a newby. I have a Twinan Vision Plus DVB S card and MediaPortal finds it OK, but when I try to configure it I cannot...