I just saw that you posted exactly the same question back in May: WMC Skin full screen/EPG
And received essentially the same comment from another team member:
I just saw that you posted exactly the same question back in May: WMC Skin full screen/EPG
And received essentially the same...
MediaPortal 2 Version: 2.2
Description
When I'm in the program guide and want to watch a channel I click on the channel but...
I also get the "Bad Karma Sorry message", which is relatively new, hopefully one of the website admins will take a look at it.
But the attached screenshot of the link you included should tell you all.:p
I also get the "Bad Karma Sorry message", which is relatively new, hopefully one of the website admins will take a look at it.
But...
Hello
Your documentation states "MediaPortal Configuration Tool - a standalone Windows application for configuring MediaPortal and...
Hello
Thanks for the information.
Yes I had to separately set the network credentials which according to the UI is step 4 when it should be step one or the user should be prompted to enter credentials on selection of the expand plus sign. Easy once you have learned the UI however it is still weak UI design as has been feedback my...
Hello
Thanks for the information.
Yes I had to separately set the network credentials which according to the UI is step 4 when...
When adding media sources I can see the network servers OK but the media portal interface plus sign is not drilling down to present...
Hello,
Thanks for your comments. Generally we recommend to also take a look at the Wiki where many questions are answered.
Right - and we explicitly say so in case of the installation not working.;)
I guess there is a 50:50 chance if you have two network adapters. I am not sure if "Auto" will automatically use one or the other...
Hello,
Thanks for your comments. Generally we recommend to also take a look at the Wiki where many questions are answered.
Right...
Hello !
I've installed the latest version (2.2 client-server mode) on a fresh new installation of windows 7 and here is my...
Currently the installer does not remove any data in the program data folder. We are working on a new improved installation procedure and the option to clean the program data folder is in our backlog.
Currently the installer does not remove any data in the program data folder. We are working on a new improved installation...
Installation of MP2 is failing on Window 7 pro with the following error.
MP2-Server failed to start. Verify you have sufficient...
Sorry, my mistake. It's within the internal team forum. I was with mobile phone and did not realize.
Then I can only summarize, that our dev is intensively working on this and next version might have teletext subtitle support included.
Sorry, my mistake. It's within the internal team forum. I was with mobile phone and did not realize.
Then I can only summarize...
Still using version 1.20 because of no teletext subtitle on live TV in Australia.
Any update with this yet?
I only have basic programming knowledge but I'm thinking even if the programming code behind the record button had an icon change once pressed to a square icon (for stop) and had an added stop recording function that called a separate stop recording class script might be all it needs yeah? I'll check in my configuration settings to...
I only have basic programming knowledge but I'm thinking even if the programming code behind the record button had an icon change...
I know this thread is ancient but i too have recently had the same problem with the final release of Media Portal 2.2. The only way...
I forgot to mention I am using the Logitech Harmony 650 remote. I just updated to the 2.2 release and the problem still exists. Has anyone got any more ideas?
Thanks :)
I forgot to mention I am using the Logitech Harmony 650 remote. I just updated to the 2.2 release and the problem still exists. Has...
Hi,
I have noticed that when the pc resumes from sleep Mediaportal 2.1.3 can not be controlled with the remote until you get the...
It is almost but there feature wise, so the end users can't really tell whether something is not yet implemented or not working because of bugs.
I used the MP's regional settings to set the date as "yyyy-MM-dd".
I just meant that my dislike of expressing myself in writing is so severe that the idea of getting into a spiral of...
It is almost but there feature wise, so the end users can't really tell whether something is not yet implemented or not working...
I tested the client on three Windows 7 x64 SP1 computers with the same results, so I would be surprised if I am the only one able...
Hello and welcome,
AFAIK (I may be wrong though) MP2 is not generally accessing attached drives unless you've defined shares in the MP2 setup that reside on these drives. In this case the access is necessary for the server to be operational. If you did not define any shares then verify the recording and timeshifting paths in the TV...
Hello and welcome,
AFAIK (I may be wrong though) MP2 is not generally accessing attached drives unless you've defined shares in...
Hey Folks, I'm new here. I'm in the middle of trying all sorts of HTPC options to replace the venerable but ageing WMC HTPC...
Anecdotal testimonies are not helpful. If you guys would like to continue this chat, I'll move this thread to the Café section.
The discussion about your issues is taking place here: Installation failing
Anecdotal testimonies are not helpful. If you guys would like to continue this chat, I'll move this thread to the Café section...
I have been looking for a replacement to Windows Media Center for a little over a year.No luck. Now, I'm no Microsoft fanboy, but I...
Setup logs needed. Something is not getting automatically installed on your system.
You can use the setuplogging.bat to run the installer. This will create a very detailed log of all install activities.
Setup logs needed. Something is not getting automatically installed on your system.
You can use the setuplogging.bat to run the...
Error:
Service MediaPortal 2 Server Service (MP2-Server) failed to start. Verify that you have sufficient privileges to start...
I upgraded to MP 2.2 Final then I did my homework since PC1 was not displayed in PC2's network environment using Windows Explorer. I found a problem with PC1's firewall setup and was able to use PC2's MP2 client after solving it :-)
Thanks
I upgraded to MP 2.2 Final then I did my homework since PC1 was not displayed in PC2's network environment using Windows Explorer...
MediaPortal 2 Version: 2.1.3
Description
My knowledge is limited so be indulgent. :-)
I just installed MP2 v2.1.3 on my PCs (PC1 =...
There's a simple answer to this: None of the lists give focus to the first item :)
...at least not on my installation. Movies, Videos, Audio, Browse media, etc. They all seem to put focus on an item in the filters / sorting menu, rather than on the list of media items themselves. I'm not sure what the intention is, but I'd prefer to...
There's a simple answer to this: None of the lists give focus to the first item :)
...at least not on my installation. Movies...
The time has come :):D
MediaPortal in Version 2.2 is released. At first as Pre-Release, because of the included major changes.
In...
There are some other patches too - for example there was an issue where the channel stops playing when coding was changed
TV stream stops every day at certain time, certain channel
and so he stops dev for over two years - everyone was waiting for him for something to show ...
There are some other patches too - for example there was an issue where the channel stops playing when coding was changed
TV...
Simple question - which TV Card (USB, CI) works with Win10 and MP2
Regards
I've established what the real problem is...I don't know what I'm doing! For the films that I've been recording, I've been trimming them in a video editor and wrongly assumed that MP2 would/should save the file with 'eng' as the default audio track and every time I tried, the NAR track was still there. I didn't realise that MP2 was...
I've established what the real problem is...I don't know what I'm doing! For the films that I've been recording, I've been trimming...
Hi, apologies for the probably stupid question, but I've not been using MP2 for very long.
I'm on Win10, and use MP2 to...
Is that because W10 handles media over networks better, or because W10 machines tend to be newer and higher specification?
It will be interesting to see if these codec changes also fix the other issues I am having with the stability of the video player if you fiddle with it while watching a video (reported in another thread).
What...
Is that because W10 handles media over networks better, or because W10 machines tend to be newer and higher specification?
It will...
Quick question for @Lehmden about this:
When I play a video file on any of my clients (ripped DVD, recorded TV or any other video...
Hi.
Every time when you are watching Live TV you're using the timeshift feature. You can not use TV without in MP (no matter if MP1 or MP2).
Watching live TV indeed is the same than playing any other video file, excerpt for the fact, that this specific video file is created in "real time" while you are watching it. So it is even...
Hi.
Every time when you are watching Live TV you're using the timeshift feature. You can not use TV without in MP (no matter if...
While I await some replacement RAM for NUC-based MP client, I have been doing some initial testing with my Windows 8.1 tablet. Its...
I've been testing a few more disc images......only 2 fail to play so far. The only common theme is the fact they both have the number 2 in the title! Very strange. :confused:
I've circa 310 blu-ray images on HDD and i'm not going to test all of them! I'll leave a piece of paper and pen out and when the rest of the family try and...
I've been testing a few more disc images......only 2 fail to play so far. The only common theme is the fact they both have the...
Looking to migrate from WMC and MyMovies -> MediaPortal2 :)
My movie folder structure is as follows.....
E: -> Blu-Ray -> A...