Specific prefix :
Show all
MP2 - V2.5
MP2 - V2.4.1
MP2 - V2.4
MP2 - V2.3.2
MP2 - V2.3.1
MP2 - V2.3
1.25.0
[solved]
Thanks, that helps a little, but after a few hours of watching tv both codecs are flickering (MS codec and lav nightly builds)
Thanks, that helps a little, but after a few hours of watching tv both codecs are flickering (MS codec and lav nightly builds)
Hi there I uses LAV Filter in MP1, because it was very fast. In MP2 my mp4 files are flickering with the LAV Code, the Microsoft...
I am using MP2 (2.2) with a PC as Client-Server and Client-Only on my other PCs. The Client-Server PC is linked to my home network through WiFi. All other clients are hard linked to the home router. Client-Server PC runs pretty well but when I attempt to look at an .mp4 movie from my Client-Only PCs the application shows the following...
I am using MP2 (2.2) with a PC as Client-Server and Client-Only on my other PCs. The Client-Server PC is linked to my home network...
I am using MP2 (2.2) with a PC as Client-Server and Client-Only on my other PCs. The Client-Server PC is linked to my home network...
With the greatest respect, ChaosMageX seems to be talking about the file system rather than the user interface (filtering).
Perhaps we could get a clarification?
If the question does relate to the file system, the following information is relevant:
Recording
Assuming the base recording folder/directory is "E:\MediaPortal", I think...
With the greatest respect, ChaosMageX seems to be talking about the file system rather than the user interface (filtering)...
I want MediaPortal to automatically separate the show folders containing the recording files by channel and by month, so that the...
Just an update,
You were right on this one, after a fresh install of Windows 10 and MP2.2, all issues are resolved.
Thanks for your support @HTPCSourcer
Just an update,
You were right on this one, after a fresh install of Windows 10 and MP2.2, all issues are resolved.
Thanks for...
Hi,
I have recently switched from MP1 to MP2 and finding a few anomalies:
When I play a tv show in the Series, I often find MP2...
Okay I found the error. MP2 do not change the system volume :( how can I change that MP2 can change the system volume and not only the volume for mp???
Okay I found the error. MP2 do not change the system volume :( how can I change that MP2 can change the system volume and not only...
Hi there,
when I watch TV I can hear the tv-stream, but when I play a Video file it is extremly quiet. :( How can I change the...
Thanks for reply, apologies delay....
I'm not sure. I did a quick search and couldn't see how to find this out.
Yep, tried that. Downloaded and installed (didn't go into configuration). Restarted and still same issue (No sound when selecting first TV channel, but when going back into the guide, and selecting another channel, then...
Thanks for reply, apologies delay....
I'm not sure. I did a quick search and couldn't see how to find this out.
Yep, tried that...
I'm not sure if these two issues are related.
When i start W10, i get an unhandled exception error (message ibroker service). I...
If no channel is visible, it means that you did not define your own channel group, correct?
Add „your“ channels to a separate group, then hide AllChannels.
If no channel is visible, it means that you did not define your own channel group, correct?
Add „your“ channels to a separate...
Hello guys,
I just upgraded my MP installation from MP 1.18 to MP 2.2.
Everything’s works almost fine, except my TV settings...
The schedule is based on the EPG and zu probably gave you an imprecise answer before. If you set a series schedule and then check the results, you will see a series of
Individual recordings, baaed on the EPG content.
What I don’t know is, how often - if at all - this schedule is verified and adjusted. My own EPG is updated every two...
The schedule is based on the EPG and zu probably gave you an imprecise answer before. If you set a series schedule and then check...
I have set up a number of series recordings. But I am not sure what the options mean - should I choose "Weekly" or "Weekly every...
The next version MP 2.2.1 will come with a new Input Manager that consumes HID events. This means that even if your remote doesn't immediately run out of the box, you will nevertheless be able to map every key on your input device, be it remote, keyboard or gamepad, to any MP2 function.
The next version MP 2.2.1 will come with a new Input Manager that consumes HID events. This means that even if your remote doesn't...
I'm a long time MP1 user but have been trying out MP 2.2, looks very good. One thing though I am struggling with is the "Input...
You can't. As there may be only one MP2 Server in a network, the server name is fixed.
You can't. As there may be only one MP2 Server in a network, the server name is fixed.
Hello,
I’m trying to change the default server name, which is shown on the Home server page in Connectivity and add a host name...
The next version MP 2.2.1 will come with a new Input Manager that consumes HID events. This means that if your remote doesn't immediately run out of the box, you will nevertheless be able to map every key on your input device, be it remote, keyboard or gamepad, to any MP2 function.
The next version MP 2.2.1 will come with a new Input Manager that consumes HID events. This means that if your remote doesn't...
WMC user with an Ortek VRC-1100 remote (actually a Harmony for everyday use), moving on to Win10 and MP2.
All the forum info about...
What might help is an upgrade of LAV. I am using the latest nightly 0.73.1-30 and it solved some other video playback problems that I had.
Generally speaking we require log files at DEBUG level to be able to say more.
What might help is an upgrade of LAV. I am using the latest nightly 0.73.1-30 and it solved some other video playback problems that...
Was running media portal 1 on a windows 7 machine - playback of films and recorded TV series just worked. About 2 years ago, I...
Similar problems reported here: unhandled exception error, and, no sound on first TV channel selected - fine afterwards
Which LAV version are you using? Would you mind testing the latest nightly 0.73.1-30 to verify if this changes anything? MP2 needs to be closed for LAV to get installed.
Similar problems reported here: unhandled exception error, and, no sound on first TV channel selected - fine afterwards
Which LAV...
Hello
I am new on MP, I have it installed in a HP portatil connected with HDMI wire to a SAMSUMG TV
In the videos (I haven´t TV...
Check out this thread: xmltv install / configure for ATSC / OTA U.S.A
Check out this thread: xmltv install / configure for ATSC / OTA U.S.A
New to this site and environment…Always used WMC, worked for me and my old eyes! Now Windows 10 Home 64 bit. Located in the USA...
What is LCN?
By the way, as far as I know Ceefax was switched off in 2012. Today there is BBC RedButton - but that's currently not supported either.
What is LCN?
By the way, as far as I know Ceefax was switched off in 2012. Today there is BBC RedButton - but that's currently not...
I attach a document relating to my problem with trying to get MP2.22 working !
Basically I am using "Windows 10 Home" version with...
Minor addition: The MP2 display can be changed by pressing Alt+Enter. The client will always start in the same mode that it was closed before.
Minor addition: The MP2 display can be changed by pressing Alt+Enter. The client will always start in the same mode that it was...
MediaPortal 2 Version: 2.2
Description
the above package has several problems
running Windows10 the package does not install the...
No problem:). I simply had a big grin on my face when I read your message.
Let me know how you did the search. We can add keywords to the WIki entry.
No problem:). I simply had a big grin on my face when I read your message.
Let me know how you did the search. We can add keywords...
Hey all I have had a couple of goes at installing MP2 and yes it worked ok,
but I was not convinced at that stage.
I am now trying...
Hi,
Sorry long delay...
Thanks for the steer. Bought a new indoor antenna, and yes, picked up all the channels. Old outdoor one only lasted 4 years or so.
all set now, cheers:)
Hi,
Sorry long delay...
Thanks for the steer. Bought a new indoor antenna, and yes, picked up all the channels. Old outdoor one...
Hi,
I've got a fresh instal of W10 and fresh instal of MP2. All updates done.
My issue is i can't seem to find any channels when...
I have added a few of my media servers and am loving the interface of the new version.
Thanks again
I have added a few of my media servers and am loving the interface of the new version.
Thanks again
Aloha All,
I’ve been using MediaPortal 2 for a couple years but I’ve been running the Summer 15 version I think. I decided to...
MP1
MP2
[solved]
No Live TV in MP2.2 Client - Can TEST Successfully in "MediaPortal 2 TV Configuration" utility
DE
That could be a reason, because user management was introduced. Strange thing for me is that I upgraded from a previous MP2.2 version with user management to the final version once. Anyhow my settings were changed.
That would be probably better. Ok, I’ll create a Jira for that later and assign you.
That could be a reason, because user management was introduced. Strange thing for me is that I upgraded from a previous MP2.2...
I upgraded from MP 2.1 to 2.2 this weekend.
I went through and reconfigured everything. The utility can confirm I can see and hear...
Ouch, my ears :D.
For your info: The input management is currently over-worked and will be changed in such way that it accepts HID input from different devices, which can then be mapped to functions and screens.
Ouch, my ears :D.
For your info: The input management is currently over-worked and will be changed in such way that it accepts...
IR Receiver blinks red and IR receiver has correct drivers. Wired keyboard and mouse work fine. No mapping shows on abstract remote...
Hi.
This feature already is available in MP2. Don't need to look at.
You can achieve it by simply use different subfolders for recurring recordings and one time recordings in SetupTV. Here you can set custom file names for recordings. If you add e.g. movies\ before the variable file naming for one time recordiungs and e.g. series\ for...
Hi.
This feature already is available in MP2. Don't need to look at.
You can achieve it by simply use different subfolders for...
I have MediaPortal 2.
Under Videos, there are options for Movies and Series.
How do I get things to appear in these listings? I...
Wow....THANKS 1000X!!! I can't believe it was only a matter of running the same video encoder on a card I am using only for audio!
Works 100% fine now, sound quality is awesome and I finally have my complete "offnet" solution!
I honestly never have received such help on a forum, am so grateful! Thanks again, you rock!!!
Wow....THANKS 1000X!!! I can't believe it was only a matter of running the same video encoder on a card I am using only for audio...
So I read about every existing thread about this issue before posting.
I have MP2 installed with TV server. Everything seems setup...
No problem. I prefer it this way than the other. (y)
Marking the thread as solved then.
No problem. I prefer it this way than the other. (y)
Marking the thread as solved then.
I am a new user, converting from Windows media centre.
I would like to record the whole series of university challenge. In media...
Ah no, that's wrong. When you click, you'll get the on-screen keyboard. Just move the cursor into the field and then type.
I can't comment on that, but the underlying structure is slightly more complex than what people may think. Doing it in the suggested manner would block keyboard input in other windows
Ah no, that's wrong. When you click, you'll get the on-screen keyboard. Just move the cursor into the field and then type.
I can't...
- Moved by admin-
OK, I have installed media portal, and now I have a number of problems.
I went into TV setup, and tuned the...
Hi Lehmden
Thanks for your suggestions. I will try some of them.
Else i'll port one of the tuners to the Myth box and decommission the MP2 Server.
Unfortunately more recent of the Fusion DVB the PCIe dual express 2 recognised by Windows does not work with Myth but the older single Fusion does so it can work with the other dual card...
Hi Lehmden
Thanks for your suggestions. I will try some of them.
Else i'll port one of the tuners to the Myth box and...
I reviewed instructions on how to install the Kodi TVServer plugin as follows:
To install this TVServer plugin:
Download the...
Right. However, doing this with the on-screen keyboard is IMHO a true pain in the neck. At my side I am using a small wireless keyboard for such purposes. Rare occasions for me, but that is of course subject to personal preferences.
Right. However, doing this with the on-screen keyboard is IMHO a true pain in the neck. At my side I am using a small wireless...
How do you input text using your remote control
My media centre is on the other side of the room, attached to the TV. I don't...
There's no immediate way at this time. You can play around with "Add to Playlist" in the context menu, which will add the complete view to (a) playlist that you can then start.
There's no immediate way at this time. You can play around with "Add to Playlist" in the context menu, which will add the complete...
I am a new user thinking of switching from Windows media centre.
How do I show my music files in Album Artist order?
And how do...
The TV part is actually "borrowed" from MP1. From a MP2 perspective TV is just one additional plugin, however, its integration into the MP2 settings is too much effort in light of our very limited resources.
That's exacly what I asked you to do.
In the above-mentioned section. See also Wiki.
So once again. In the left side open TV...
The TV part is actually "borrowed" from MP1. From a MP2 perspective TV is just one additional plugin, however, its integration into...
I scheduled to record on Monday on SBS a documentary about the Tube and when I went to play it back the recording was from 35...
The code is exactly the same. To be sure I als looked into the code pieces of original 2.2 build, as I'm working alreay with newer builds.
I have no idea how the difference can happen. I think only a Dev might fingure this out by debugging.
The code is exactly the same. To be sure I als looked into the code pieces of original 2.2 build, as I'm working alreay with newer...
Hi,
I created nfo files for my movies by using TMM and then I imported the nfo into mp2.
So far so good.
Then I had to change some...