Having trouble installing or configuring MediaPortal?
I had the same issue here in Austria with Kabelsignal and the Hauppauge WinTV-dual HD DCBC card.
I modified the xml DVBC Channel file and attach it here.
I had the same issue here in Austria with Kabelsignal and the Hauppauge WinTV-dual HD DCBC card.
I modified the xml DVBC Channel...
Hi there,
My cable provider (DVB-C) has updated some channels and therefore I have to re-scan all the available channels.
The...
When my AVR bit the dust recently I took the opportunity to upgrade my projector to an LS11000 to gain 4K. Install went fine until I switched to my HTPC which is my primary source. When I switch to the HTPC the screen goes blank for a long time and then I have sound, no picture, and in the lower left hand corner:
"Source: HDMI 1
Not...
When my AVR bit the dust recently I took the opportunity to upgrade my projector to an LS11000 to gain 4K. Install went fine until...
When my AVR bit the dust recently I took the opportunity to upgrade my projector to an LS11000 to gain 4K. Install went fine until...
Hmm, seems to me that there is something very non-standard about your win 7 setup on top of the fact that MS no longer support Win 7 and very little testing has been done in conjunction with it and the latest versions of Media Portal, basically because hardly anyone is using that version of the OS any longer. By all means continue...
Hmm, seems to me that there is something very non-standard about your win 7 setup on top of the fact that MS no longer support Win...
Difficulty installing mediaportal version1 X64 Win7
I believe I have DL the correct version just can't install.
Seams that...
Judging by the source code, 1.20 has DB version 61, and 1.33 has DB version 62. That is, one column has been added: symbolRateMultiplier
Judging by the source code, 1.20 has DB version 61, and 1.33 has DB version 62. That is, one column has been added...
Hi I have a TV server 1.12 on a dedicated box, utilizing 2 DVB-C cards and newcs. I want to keep that installation.
However one of...
I've done a few MP1 installs in the past and haven't had a problem, so I didn't expect one today. I just purchased a mini PC with Win11 installed. I downloaded and tried installing Mediaportal 1. I chose single click standard installation with no TV. It started working on things and I wasn't paying terribly close attention, but...
I've done a few MP1 installs in the past and haven't had a problem, so I didn't expect one today. I just purchased a mini PC with...
I've done a few MP1 installs in the past and haven't had a problem, so I didn't expect one today. I just purchased a mini PC with...
Oh no. That's not good news. It looks like this is going to be complicated.
OnlineVideos won't let us record, so that isn't going to work on this occasion, but I do like the information you have given on Online Videos because I have tried and failed to understand the wiki on that. I will remember this for future use.
In the meantime...
Oh no. That's not good news. It looks like this is going to be complicated.
OnlineVideos won't let us record, so that isn't going...
Good evening!
I am trying to set up a TV channel in the TV server to show my live stream from a local camera. I am clearly doing...
Hi,
my answers to your questions:
I use MariaDB 10.5 and Mediaportal 1.33 x86 as a user, not an administrator.
MP. When I start Mediaportal, no TV service appears to have started.
If I start Mediaportal as administrator everything is ok.
Starting the TV service separately is only possible as an administrator.
If I then start...
Hi,
my answers to your questions:
I use MariaDB 10.5 and Mediaportal 1.33 x86 as a user, not an administrator.
MP. When I start...
I updated to 1.33 today and I thought everything went smoothly except on restarting MediaPortal requests me to specify the IP...
It took a while but loading the three updates and waiting, (I wandered off doing other things), while the Win 7 searched for updates eventually brought about 170 available updates. I picked the latest, largest and Cumulative ones and everything burst into action enough to re-install MediaPortal 1.33 which is running very well. I let...
It took a while but loading the three updates and waiting, (I wandered off doing other things), while the Win 7 searched for...
Hi
Running MP1 - 1.39 for long while, no issues.
10th April [same time as 2024-KB5037036 Cumulative Update for .NET Framework...
I removed all sign of MySQL, rebooted, did a clean reinstall. It reinstalled 5.6, But I've still got both the same problem - unable to connect to any of the specified MySQL hosts. And Hostname is still in red. I don't understand - this is a dedicated TV computer. Unless an update did this I don't know why there's a problem in the...
I removed all sign of MySQL, rebooted, did a clean reinstall. It reinstalled 5.6, But I've still got both the same problem -...
I've been using MediaPortal for 20 or so years. Last night it recorded perfectly. This arvo it doesn't - will run videos but not...
https://forum.team-mediaportal.com/threads/5154-mediaportal-1-x64-sharpdx.140955/
Attached as extension.zip in first post.
https://forum.team-mediaportal.com/threads/5154-mediaportal-1-x64-sharpdx.140955/
Attached as extension.zip in first post.
I installed the x64 1.32 Version and eveything seems fine.
But where are the MovingPictures and MP-TVSeries Plugins?
I can still...
To be fair the normal uninstall is usually more than sufficient. I regularly uninstall and reinstall MP 1 as part of the testing process and only very rarely have I needed to use the manual procedure posted by @CyberSimian to overcome the error you ran into. I also believe there is a procedure to repair the MySQL install in the event...
To be fair the normal uninstall is usually more than sufficient. I regularly uninstall and reinstall MP 1 as part of the testing...
I am trying to install Mediaportal with TV Server. I tried many versions, including current x64 and new prerelease x86, and...
I can confirm that. After reinstalling MP1.31(x86) I mistakenly installed the x64 version MpUrlSourcesplitter. Then I got the error. After uninstalling MpUrlSourcesplitter(x64) I installed the MpUrlSourcesplitter(x86). But the error message still comes.
I can confirm that. After reinstalling MP1.31(x86) I mistakenly installed the x64 version MpUrlSourcesplitter. Then I got the...
Just completed a clean install of Win 10 followed by MP 1.31. During install the installer hung up because I didn't have .net 3.5...
Thats it. Thanks.
Thats it. Thanks.
I have installed win10. After the mp1.32 installation didn't work without problems, I reinstalled 1.31 and restored my old settings...
Installed LAV filters and codec and now it works,
Installed LAV filters and codec and now it works,
New install win 11. have hauppauge 955q usb tuner astc. I see it in device manager under sound video game controllers. i did...
Hi,
First off: there are some issues with the latest Mediaportal (32bits vs 64bits), so that is one of the issues you're stumbling with.
If you take the previous version (1.31) it should work as expected.
For IPTV there is also a different option (with different pros and cons): Onlinevideos.
I'm using that sometimes for my IPTV as...
Hi,
First off: there are some issues with the latest Mediaportal (32bits vs 64bits), so that is one of the issues you're stumbling...
Hi I am trying to play a m3u file from my IPTV provider, but when I try to install the TV part of Media Portal v1.3.2 I get an...
Hi, you can try the new installer from this post if you like.
Hi, you can try the new installer from this post if you like.
Hello,
I came from MediaPortal 1.30 and wanted to Update on 1.32 x64 Edition.
I cleanly uninstalled 1.30 first and then installed...
That fixed the problem. I just manually installed VC_redist.x64.exe and reinstalled 1.32 64-bit. Thanks for that.
A couple of things; the deployment tool for 1.32 doesn't remove the previous version when you're updating from 1.31 to 1.32 and "MediaPortal TV Server" gets installed even when you choose to install the client only.
I...
That fixed the problem. I just manually installed VC_redist.x64.exe and reinstalled 1.32 64-bit. Thanks for that.
A couple of...
I have performed client installations of 1.32 64-Bit on four machines using the central configuration setup on Windows 10 Pro...
MP 1.32 x64 does not have a 64 bit TV Server but it uses the x86 one but should have upgraded the 1.30 x86 TV Server to MP 1.32(still x86) The fact it does not appear to have done so is not surprise to me, the MP 1.32 x64 installer is far from being bug free. If everything is functioning OK my advice would be to leave it alone and...
MP 1.32 x64 does not have a 64 bit TV Server but it uses the x86 one but should have upgraded the 1.30 x86 TV Server to MP...
As it says....Upgraded from 1.30 to 1.32(64).....but TV Server config remains at 1.30.......
MP opens....and declares itself to be...
On Windows 11 I'm having a similar experience, except it's with MySql.
Today I downloaded MediaPortalSetup_1.31_Release.zip and I get CRC check error.
On third try I don't get CRC error
On Windows 11 I'm having a similar experience, except it's with MySql.
Today I downloaded MediaPortalSetup_1.31_Release.zip and I...
When I was installing MP 1.31 last weekend I selected to download the files and install from a local folder.
I got these messages...
Isn't this normal?
I mean perhaps you should first do some config before you can start using mediaportal?
Isn't this normal?
I mean perhaps you should first do some config before you can start using mediaportal?
I recently move to Los Angeles, California and downloaded & installed Media Portal 1.32 pre Release, to find out the programs media...
Hello MP Team,
I have issues with mounting .iso files. Two seconds after mounting .iso and starting external player, the iso is unmounted again by MP and therefore doesnt show up in the drive any longer.
Example:
[2023-10-16 18:43:04,367] [Log ] [MPMain ] [INFO ] - Start process C:\Program Files (x86)\Elaborate...
Hello MP Team,
I have issues with mounting .iso files. Two seconds after mounting .iso and starting external player, the iso is...
Hello MP Team,
I have issues with mounting .iso files. Two seconds after mounting .iso and starting external player, the iso is...
Just did an update of my system from Win 7 / MP 1.25 to Win 10 / MP 1.31 on a single seat system and came across a problem with the tv server startup being erratic.
Approx 50% of the time on PC reboot from scratch the tv server process was showing "starting" but would never start and consequently neither would MP or MP Server Config...
Just did an update of my system from Win 7 / MP 1.25 to Win 10 / MP 1.31 on a single seat system and came across a problem with the...
Just did an update of my system from Win 7 / MP 1.25 to Win 10 / MP 1.31 on a single seat system and came across a problem with the...
Yes correct that would have solved it. I guess I was more interested in finding out what I had done to cause the problem as the error message was of no help.
By deleting everything I wouldn't have known so it was a learning curve for future reference.
Fully understood I thought that might be the case.
I also had some issues with...
Yes correct that would have solved it. I guess I was more interested in finding out what I had done to cause the problem as the...
I've just updated to Win 10 on a second drive and am installing MP 1.31. Having a bit of trouble with the install with the...
I don't organise my media in the way that you do, so I don't know whether MediaPortal provides the capability that you want. All that I can suggest is that you read this page in the MP Wiki and experiment to see if it will merge the separate folders to give you a unified view of the media.
-- from CyberSimian in the UK
I don't organise my media in the way that you do, so I don't know whether MediaPortal provides the capability that you want. All...
Hi i have a collection of 9208(Still growing on a daily basis)) music videos(ripped in m2ts format from blu-rays) which are stored...
Thankyou.I did a re-install of the Mediaportal Client.Seems to be OK now.
Thankyou.I did a re-install of the Mediaportal Client.Seems to be OK now.
After upgrade to version 1.31 nor Mediaportal or MediaPortal Configuration will start.
I windows event logg I get the following...
@TLD @framug Each of you can make changes to the Titan, add support for any plugin, fix a bug you found, etc., well, just to talk, anyone can :) :whistle::coffee:
@TLD @framug Each of you can make changes to the Titan, add support for any plugin, fix a bug you found, etc., well, just to talk...
Hi,
Since I update Mediaportal to 1.23, the Titan skin is broken.
I checked the skin files and all are default ones (comparison...
Copy this https://forum.team-mediaportal.com/threads/update-gentle-net-and-mysql-data-dll.129139/
And TV Server start with MariaDB 10.11.2.
Copy this https://forum.team-mediaportal.com/threads/update-gentle-net-and-mysql-data-dll.129139/
And TV Server start with MariaDB...
I updated my MySQL server from 8.0.28 to 8.0.29 and now the tvservice crashes on start. The attached log doesn't give me a clue...
You need to setup the TV tuner in "TV Server Configuration". There should be a shortcut on the Windows desktop. The primary action is to "scan for channels", but obviously there are other things to setup too (such as the folder to use for recordings).
MediaPortal should be able to use your tuner provided that the tuner has a BDA...
You need to setup the TV tuner in "TV Server Configuration". There should be a shortcut on the Windows desktop. The primary action...
New to Media Portal. I have it installed and working with the remote but cannot figure out how to get the tv tuner to work. I'm...
Ok, now this really pisses me off, because I tried that yesterday and when I fired up MP and selected videos, it hung. I just tried it now and that appears to be working. (Networks. I hate networks.)
Thanks.
Ok, now this really pisses me off, because I tried that yesterday and when I fired up MP and selected videos, it hung. I just...
I have an existing HTPC that I've been using for years. I'm replacing it with a new machine and I'm trying to get it configured...
8 years later I had the same problem upgrading from 1.29 to 1.30 - and the same solution worked :)
Problem was caused by tvservice permissions being messed up so the installer could not stop the service - fixed by a neat little program called ServiceSecurityEditor - I set INTERACTIVE and SERVICE to allow stop/start, then the installer...
8 years later I had the same problem upgrading from 1.29 to 1.30 - and the same solution worked :)
Problem was caused by tvservice...
Hi folks,
I just upgraded my MediaPortal box from version 1.8 to version 1.10. After the upgrade, Mediaportal failed to start. I...
