Azzuro and doskabouter, got it working. Resetting the database worked. And after linking to the server via current IP and making a new db, I relinked to the original db and all settings were restored.
Thanks again and Happy New Year to all!
Azzuro and doskabouter, got it working. Resetting the database worked. And after linking to the server via current IP and making a...
A couple weeks ago the TV server service stopped working. Not urgent, so waited till today to research it.
Did an upgrade to 1.26...
If your remote control is the Ortek VRC-1100 or the Hama equivalent, you must be using the "Centarea HID" in MP, and possibly using the AutoHotKey script that I wrote for it. This script checks for the "green marble" button, and starts MP from the desktop when that button is pressed. Changing this script to invoke (say)...
If your remote control is the Ortek VRC-1100 or the Hama equivalent, you must be using the "Centarea HID" in MP, and possibly using...
Hi, I am at a loss as to what is going on with my installation at the moment. I was using it this morning no problems, shut it...
At the moment I am trying to get MediaPortal installed on Windows 7
I'll take another look at the EPG Grabber for DVB-S FreeSAT if I get MediaPortal up and running on Win7
Working on this right now and may be getting somewhere so I'll provide details as I hope the info is useful to others
The problem originates with MediaPortal on...
At the moment I am trying to get MediaPortal installed on Windows 7
I'll take another look at the EPG Grabber for DVB-S FreeSAT if...
Hi everyone
I hope you are all well
Wondering if anyone has a idea about .Net4 and the new 1.26 MediaPortal update
The update told...
The "TV Server" part of MP is included in the MP download. However, it is installed only if you specify at install time that you will be using a TV tuner.
If the install is successful, there are two config tools. You access these via shortcuts on the Windows desktop:
MediaPortal Configuration
TV Server Configuration
-- from...
The "TV Server" part of MP is included in the MP download. However, it is installed only if you specify at install time that you...
I am a newbie coming over from MythTv. I have downloaded Media Portal 1.25 onto Win 10 Home. Installed OK but with no TV con fig. I...
I have also experienced this in recent weeks. @high ?
@morpheus_xx has replied to the other thread, so this thread is not needed.
-- from CyberSimian in the UK
I have also experienced this in recent weeks. @high ?
@morpheus_xx has replied to the other thread, so this thread is not needed...
install failed. error 0x800b010a.
using windows 7
hoping this would be better than wintv which came with my Hauppauge dual tv...
I have been using a centrally configured MediaPortal system for several years and locks on VideoDatabaseV5.db3 and FolderDatabase3.db3 would be released when I select Shutdown just as they would when Exit MediaPortal is selected. All of a sudden, and I have no idea why, the locks on the client databases are not being released when...
I have been using a centrally configured MediaPortal system for several years and locks on VideoDatabaseV5.db3 and...
I have been using a centrally configured MediaPortal system for several years and locks on VideoDatabaseV5.db3 and...
When importing downloading XML EPG from SchedulesDirect I get "attempt to index local `zf' (a nil value)" in the log.
Any ideas on how to get around this problem so that I can import the EPG?
Thanks for any advice.
Quote Quote
Report Edit
When importing downloading XML EPG from SchedulesDirect I get "attempt to index local `zf' (a nil value)" in the log.
Any ideas...
When importing downloading XML EPG from SchedulesDirect I get "attempt to index local `zf' (a nil value)" in the log.
Any ideas...
MP TV server is the TV server for MP1, the MP client is configured in Mediaportal configuration, TV section but it won't work until the tv server setup is complete. Its really only a matter of putting in the IP address or host name.
MP TV server is the TV server for MP1, the MP client is configured in Mediaportal configuration, TV section but it won't work until...
Hello, I have a Hauppague HDPVR 1212 and can't seem to be able to set it up with MP .
i searched, but can't seem to find a...
On one host (computer, HTPC, server) you can install:
Mediaportal
TVServer
Mediaportal + TVServer
TV Server need only for TV support, multiple clients can access the one TV Server. If you do not have TV tuners in your host or not have IPTV, you do not need a TV server at all.
To watch videos, movies, music, pictures, etc. (except...
On one host (computer, HTPC, server) you can install:
Mediaportal
TVServer
Mediaportal + TVServer
TV Server need only for TV...
I have tried to install several extensions (i.e. Moving Pictures and MP Series) and keep getting an error that the...
LogoManager is a client plugin that looks up TV channel and radio station names from the TV-Server and downloads the corresponding logos from a set of online repositories and can then add backgrounds, apply effects and search for updates at a set interval.
@Tim B I can add your channels to LogoManager if they're not already...
LogoManager is a client plugin that looks up TV channel and radio station names from the TV-Server and downloads the corresponding...
I've been working on switching to the server / client setup (TV-Engine), and all is going fairly well so far. I was using...
Good catch. (y)
When the OS encounters a bad disk block during a read or a write, it repeats the operation many many times to see if the operation will succeed. I recollect seeing the value of 100 times (but that may not be accurate). The OS does this for each block. If there are many defective blocks, the system slows down due to...
Good catch. (y)
When the OS encounters a bad disk block during a read or a write, it repeats the operation many many times to see...
Hello folks,
I recently upgraded from Win7 to Win10, and have had some problems with MediaPortal, the main problem was my TVServer...
Right I think I fixed it. What I did was install Revo Uninstaller, then completely uninstalled MediaPortal and MySQL using Revo, deleting everything. I then reinstalled.
I can now run the TV Server.
Right I think I fixed it. What I did was install Revo Uninstaller, then completely uninstalled MediaPortal and MySQL using Revo...
I renamed my username in Windows 10, and Mediaportal TV Server stopped connecting to Kodi.
So I went into TV Server...
I noticed that ... I fixed it, so if somebody downloads it from here it won´t confuse people... :)
I deleted the old file and uploaded new file instead.
I noticed that ... I fixed it, so if somebody downloads it from here it won´t confuse people... :)
I deleted the old file and...
Hi there,
My cable provider (DVB-C) has updated some channels and therefore I have to re-scan all the available channels.
The...
I was having so many problems with MP1 that i elected to reinstall windows 10. I was able to get the tv epgs fine before but with the latest installation - the beta - when I went to scan for tv channels I was presented with something I hadn't seen before - which was SAP Announcements and a list of non-Australian countries!!
I dug...
I was having so many problems with MP1 that i elected to reinstall windows 10. I was able to get the tv epgs fine before but with...
I was having so many problems with MP1 that i elected to reinstall windows 10. I was able to get the tv epgs fine before but with...
Although I don't use MP1 any longer, I suspect that your "new" system received also a new IP address. You either need to assign the same previous IP address to your PC or edit the TV database using a SQL editor. The MP1 Wiki is somewhere describing these steps, but here is a quick description what to do:
Thanks guys I could edit that...
Although I don't use MP1 any longer, I suspect that your "new" system received also a new IP address. You either need to assign the...
Hello folks,
I have only just got around to updating my Windows 7 HTPC to Windows 10, MP was running normally in Windows7, now...
Ok, then I solved it;
I downloaded "mysql-workbench-community-8.0.18-winx64" MpTvDb; (user; root and pw; MediaPortal)
I was looking for table "server"; edit to a a proper networkaddress.
Restart pc some 3 times, then it worked again.
This behavior must be regarded as a bug. Can it be fixed?
Ok, then I solved it;
I downloaded "mysql-workbench-community-8.0.18-winx64" MpTvDb; (user; root and pw; MediaPortal)
I was looking...
Hi guys! Can you please help me out on this issue. Any clues provided are good ones...
Failed to startup tvservice
Sorry for...
Ok, then I solved it;
I downloaded "mysql-workbench-community-8.0.18-winx64" MpTvDb; (user; root and pw; MediaPortal)
I was looking for table "server"; edit to a a proper networkaddress.
Restart pc some 3 times, then it worked again.
Ok, then I solved it;
I downloaded "mysql-workbench-community-8.0.18-winx64" MpTvDb; (user; root and pw; MediaPortal)
I was looking...
Attempting to clean-install 1.19.0 TV-server standalone, but receiving the attached error as installation is finishing (or whenever...
Have you changed something? Computer name? IP address? MySQL on this host? Or? ...
In google i found similar problem:
Problem: Connection to the MySQL server occurs with the error "Host‘ such and such ’is not allowed to connect to this MySQL server." This is due to the fact that the user on behalf of whom you are accessing the MySQL...
Have you changed something? Computer name? IP address? MySQL on this host? Or? ...
In google i found similar problem:
Problem...
Hello everybody,
after the installation of MP1.23 I have a problem with the TV server. On opening the TV server configuration the...
Thank you! Thank you! I had installed the hd homerun application from the windows store, but the full installation from the silicon dust site is what was needed to make the tuners appear in media portal 2 as you mentioned.
Thank you! Thank you! I had installed the hd homerun application from the windows store, but the full installation from the...
Hello,
i really want to get this to work. I have windows 10 and have tried like 5 times reinstalling mediaportal1 using different...