Having trouble installing or configuring MediaPortal?
Hello,
I will do so at WE and send the logs after the Problem!
Hello,
I will do so at WE and send the logs after the Problem!
Nearly evere Startup comming up from sleep of the HTPC this Problem!!!!
Going to the Configuration Setup, Automaticconnection...
I have the same Problem.
Nearly evere Startup comming up from sleep of the HTPC this Problem!!!!
Going to the Configuration Setup, Automaticconnection, Storing, starting MP.
The Software is actual 1.28
This is absolutely shit!!!!
I have the same Problem.
Nearly evere Startup comming up from sleep of the HTPC this Problem!!!!
Going to the Configuration...
I've downloaded mpextended-service 0.6.0.4-emby-zip. Extracted it to find MPExtended-installer.Services.msi
When I run the .msi...
Colossus shows up and tried what was in the wiki scanned for channels but no channels detected. Was trying for couple of hours but nothing. I did find another program that picked up the channel and am recording without the choppy laggy video. Thank you again for the fast response and help.
Colossus shows up and tried what was in the wiki scanned for channels but no channels detected. Was trying for couple of hours but...
Hi i'm new to the forum. I'm having a problem i'm using Hauppauge colossus 2 and have my cable connected using hdmi cable. I open...
Hi joecrow
Yep it did auto-login normally, but after the mediaportal install it just never got to that point. I reset the windows again and re-set it up today.
This is the 3rd reset so I'm not confident, but the difference this time is perhaps that I was careful to install one thing at a time, and restart a lot.. the difference in...
Hi joecrow
Yep it did auto-login normally, but after the mediaportal install it just never got to that point. I reset the windows...
Hi everyone
I purchased this mini PC: https://www.kogan.com/au/buy/kogan-atlas-z310-i3-mini-pc-windows-10/ and have installed the...
Hallo, ich bin umgezogen und an der neuen Adresse gibt es leider nur Kabel und kein Sat.
Bekomme ich das irgendwie zum laufen? Also gibt es eine Möglichkeit, dass ich TV über MediaPortal gucken kann? Zwar findet der Rechner einige Sender, aber z.B. Dmax gibt es nicht als "frei". Also brauche ich ein CI-Modul und eine Smartcard. Diese...
Hallo, ich bin umgezogen und an der neuen Adresse gibt es leider nur Kabel und kein Sat.
Bekomme ich das irgendwie zum laufen? Also...
Hallo, ich bin umgezogen und an der neuen Adresse gibt es leider nur Kabel und kein Sat.
Bekomme ich das irgendwie zum laufen? Also...
I have one more piece of information about the problem.
Apparently it's the client. I just installed Kodi and connected it to the MP server. That's working.
I have one more piece of information about the problem.
Apparently it's the client. I just installed Kodi and connected it to the...
I try my thread in English
My single seat has been running smoothly for a long time. Now I wanted to connect another client, but I...
You need to use the MDAPI plugin to get MediaPortal and Acamd working together but they can't be discussed on this forum.
You need to use the MDAPI plugin to get MediaPortal and Acamd working together but they can't be discussed on this forum.
I want to rescan my channel list ,as well as edit my xml file so transponders are all coorect.Media portal works fine ,but I am...
I ended up doing a clone disk recovery. I had just done a backup, and I figured I might as well test it -- it's been a while since I've gone through the recovery process. All good. :)
I had the logs, but lost them in the recovery. Sorry. :(
I believe the issue was that I had removed Windows Media Player from Windows Features. Still...
I ended up doing a clone disk recovery. I had just done a backup, and I figured I might as well test it -- it's been a while since...
So I tried upgrading from 1.27 to 1.28. I upgrade frequently without issues. I did a simple upgrade, so I did not delete my user...
So after a long search and a lot of experiments I did find out the culprit:
I did disable events of the Common Information Model Object Manager.
As soon as they are disabled TV server will always show "port 554 is already bound".
Enabling/disabling events is done by this reg key:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WBEM\CIMOM]...
So after a long search and a lot of experiments I did find out the culprit:
I did disable events of the Common Information Model...
I've got a Digital Devices Cine S2 V7A Twin and a DigitalEverywhere FloppyDTV for Satellite TV.
I've been running MediaPortal 1.4.0...
TI_MDB gets data from two sites, TMDB and IMDB.
IMDB_MP117 receives data only from IMDB site, if something has changed on IMDB site, IMDB_MP117 will not receive data or part of it. To fix it, you need to understand what is broken.
TI_MDB gets data from two sites, TMDB and IMDB.
IMDB_MP117 receives data only from IMDB site, if something has changed on IMDB...
I am in the UK and have suddenly started to have issues with getting MovieInfo information using the IMDB grabber scripts. Most of...
Hi @azzuro, I don’t know what was wrong with loading onto my new HTPC.
After many days of trying to get MePo to work, I’m afraid I gave up and jumped ship to Kodi - which worked first time without problems. After 10 years with Mediaportal, it was a huge shame to leave but I couldn’t get it to work at all with my new PC with integrated...
Hi @azzuro, I don’t know what was wrong with loading onto my new HTPC.
After many days of trying to get MePo to work, I’m afraid I...
Hi, I've been using MediaPortal 1 for many years on an HTPC with a graphics card,
but since switching to a Dell Optiplex 5080 with...
First of all: The MePo 1.19 on Win10 32Bit with the same Remote is running in exact the same configuration ...
Yes: I also will use a Harmony Elite for my new Livingroom HTPC. I've buyed the HAMA only for the IR-Receiver that I need
I've tested the new HTPC with MePo 1.27 and it will not stop with all Remotes. Also not with the...
First of all: The MePo 1.19 on Win10 32Bit with the same Remote is running in exact the same configuration ...
Yes: I also will...
Stop Button is not working when pressing while watching a TV recording. So Stopping is only by jumping to the end ...
I use this...
I have now connected the IR Receiver from the HAMA Remote and enabled the HDI in Remotes. It will worke
I have now connected the IR Receiver from the HAMA Remote and enabled the HDI in Remotes. It will worke
Hello
I used SerialUIR on my old XP HTPC. But unfortunately I can't get it to work right now. I plugged the COM plug of the old...
There's a update needed to get newer logos for Germany and some other countries, either save this .config file and replace the existing file in C:\ProgramData\Team MediaPortal\MediaPortal or use larry_s' installer, which already includes it.
There's a update needed to get newer logos for Germany and some other countries, either save this .config file and replace the...
How I can get TV Logos? Where is to set a Button to have it?
Maybe in StreamedMP Configuration? Or other RSS plugin, like World News World News
Maybe in StreamedMP Configuration? Or other RSS plugin, like World News World News
I mean the promotions in the bottom ...
I´m even on Windows 10 Insider Preview 21343 and everything works perfect here :whistle: ;)
I´m even on Windows 10 Insider Preview 21343 and everything works perfect here :whistle: ;)
It stopped while I found a copy of wmp11-windowsxp-x86-enu.exe. Really guys? XP?
MSFT no help, found one on FileHippo, but it...
MP1
MP2
Directx 9.0 June 2010 does not install on Windows 10 x64, ends up with weird failure / no debug file
DE
It was 1.27 that I had the problem with. 1.26 installed without any issues though.
Tony
It was 1.27 that I had the problem with. 1.26 installed without any issues though.
Tony
Hi!
I am trying to set up a new installation of MP 1.22 / 1.23 on a absolutely fresh installation of Win 10 Build 17.763.168 /...
Yes. I guess we'll just have to wait for it to happen again.
Tony
Yes. I guess we'll just have to wait for it to happen again.
Tony
I'm trying to install MediaPortal 1.27 on a machine as a single seat installation but keep getting the following error dialog...
I think there's a master table here http://install.team-mediaportal.com/MPEI/extensions.txt with a list of urls to all the plugin sources.
Don't know exactly who has rights to change that
I think there's a master table here http://install.team-mediaportal.com/MPEI/extensions.txt with a list of urls to all the plugin...
I am attempting a virgin installation and configuration of MP1 v1.26 on a fresh installation on windows 8.1 Pro x64. When i try to...
Done for : MP1-5063 :)
Done for : MP1-5063 :)
Hallo,
Das Update von Mediaportal Version 1.26 auf Version 1.27 ist auf meinem WES2016 nicht möglich. Laut Fehlermeldung kann die...
upon a second look at MP Config, there is no latency setting... only "Repeat delay" and "Repeat speed" settings, not even in Windows is there a setting for latency for HID devices. If the remote doesn't have those settings in the MyHarmony setup, then there is no recourse. :(
upon a second look at MP Config, there is no latency setting... only "Repeat delay" and "Repeat speed" settings, not even in...
I have a Logitech Harmony 650 remote and Microsoft 1040 IR receiver which I used successfully for several years on a home-built PC...
Since this thread has wandered a bit from the original issue / title, I am starting another one.
Since this thread has wandered a bit from the original issue / title, I am starting another one.
I have just done a virgin installation of MP 1.26 on a bare metal installation of Windows 8.1 Pro x64 (because Intel does not...
Have you selected the correct data format on the Schedules Direct web site?
For the USA and Canada, the EPG data can be provided by SD in XML format or JSON format. XML format is the old style, and JSON format is the new style. Unfortunately, the TV Server plugin can process only XML format. If you are in fact downloading JSON...
Have you selected the correct data format on the Schedules Direct web site?
For the USA and Canada, the EPG data can be provided...
I have installed version 1.27on MediaPortal and 1.11.0.2 of the Schedules Direct plugin. I scanned my Hauppauge WinTV dualHD...
Thanks @CyberSimian very informative!(y)(y)(y)
Maybe Developers could add this information anywhere ;)
Thanks @CyberSimian very informative!(y)(y)(y)
Maybe Developers could add this information anywhere ;)
I'm confused... This is about section <Keys and Sound>
I have MP running on 2 PC's.
Both PC tell met that this is <Deprecated...
Azzuro and doskabouter, got it working. Resetting the database worked. And after linking to the server via current IP and making a new db, I relinked to the original db and all settings were restored.
Thanks again and Happy New Year to all!
Azzuro and doskabouter, got it working. Resetting the database worked. And after linking to the server via current IP and making a...
A couple weeks ago the TV server service stopped working. Not urgent, so waited till today to research it.
Did an upgrade to 1.26...
If your remote control is the Ortek VRC-1100 or the Hama equivalent, you must be using the "Centarea HID" in MP, and possibly using the AutoHotKey script that I wrote for it. This script checks for the "green marble" button, and starts MP from the desktop when that button is pressed. Changing this script to invoke (say)...
If your remote control is the Ortek VRC-1100 or the Hama equivalent, you must be using the "Centarea HID" in MP, and possibly using...
Hi, I am at a loss as to what is going on with my installation at the moment. I was using it this morning no problems, shut it...
At the moment I am trying to get MediaPortal installed on Windows 7
I'll take another look at the EPG Grabber for DVB-S FreeSAT if I get MediaPortal up and running on Win7
Working on this right now and may be getting somewhere so I'll provide details as I hope the info is useful to others
The problem originates with MediaPortal on...
At the moment I am trying to get MediaPortal installed on Windows 7
I'll take another look at the EPG Grabber for DVB-S FreeSAT if...
Hi everyone
I hope you are all well
Wondering if anyone has a idea about .Net4 and the new 1.26 MediaPortal update
The update told...
The "TV Server" part of MP is included in the MP download. However, it is installed only if you specify at install time that you will be using a TV tuner.
If the install is successful, there are two config tools. You access these via shortcuts on the Windows desktop:
MediaPortal Configuration
TV Server Configuration
-- from...
The "TV Server" part of MP is included in the MP download. However, it is installed only if you specify at install time that you...
I am a newbie coming over from MythTv. I have downloaded Media Portal 1.25 onto Win 10 Home. Installed OK but with no TV con fig. I...
I have also experienced this in recent weeks. @high ?
@morpheus_xx has replied to the other thread, so this thread is not needed.
-- from CyberSimian in the UK
I have also experienced this in recent weeks. @high ?
@morpheus_xx has replied to the other thread, so this thread is not needed...
install failed. error 0x800b010a.
using windows 7
hoping this would be better than wintv which came with my Hauppauge dual tv...
I have been using a centrally configured MediaPortal system for several years and locks on VideoDatabaseV5.db3 and FolderDatabase3.db3 would be released when I select Shutdown just as they would when Exit MediaPortal is selected. All of a sudden, and I have no idea why, the locks on the client databases are not being released when...
I have been using a centrally configured MediaPortal system for several years and locks on VideoDatabaseV5.db3 and...
I have been using a centrally configured MediaPortal system for several years and locks on VideoDatabaseV5.db3 and...