Having trouble installing or configuring MediaPortal?
Re: Visual C++ fails to install -SOLVED
Got it.
Right clicking the Setup icon and choosing "Run As Administrator" solved this and it all installed correctly.
Don't know why this should make a difference, since I only have one user account on my laptop and it has Admin privileges anyway. But it worked.
If this advice was in...
Re: Visual C++ fails to install -SOLVED
Got it.
Right clicking the Setup icon and choosing "Run As Administrator" solved this...
Hi all,
New user, or hoping to be anyway!
I can't get past the Visual C++ installation when running the installer. I chose...
Hi there,
Have a look there https://forum.team-mediaportal.com/input-output-interfaces-337/koenig-mce-remote-84572/ , you might find an anwser to your problem. I have a Konig remote that I have setup with a IONE Q11 driver and it works fine exept that some buttons are not recognized by the system (driver problem most likely). If...
Hi there,
Have a look there https://forum.team-mediaportal.com/input-output-interfaces-337/koenig-mce-remote-84572/ , you might...
Hello MediaPortal- team,
I got a new remote control unit, the "König MCE CMP-MEDIAREM10 Remote Control", which is the pendant to...
Fantastic! :D
I'm sorry you've gone through so much hassle to get to this point, but hopefully you can see it as just another learning experience. Now is the best time though - when we get to kick back and enjoy the fruits of our labours.
Enjoy :)
mm
Fantastic! :D
I'm sorry you've gone through so much hassle to get to this point, but hopefully you can see it as just another...
MediaPortal Version: 1.1.3.0
MediaPortal Skin: Black Glass
Windows Version: Windows 7 x86
CPU Type: intel
HDD:
Memory: 4gb...
Hi folks
I know this thread is a little old. For people reading in the future: the card is supported fine. You may need to use the default Windows drivers as reported -->here<-- if using Windows 7. If you have trouble with other operating systems then post logs - we can't help without them.
mm
Hi folks
I know this thread is a little old. For people reading in the future: the card is supported fine. You may need to use the...
Dear Forum,
I'm excited about getting MediaPortal running - mainly because it allows me to chose the video and audio codecs...
AW: Broken installation keeps stopping new install
a complete uninstall and new install did it for me...
thread closed
AW: Broken installation keeps stopping new install
a complete uninstall and new install did it for me...
thread closed
MediaPortal Version: 1.1.1
MediaPortal Skin: blue two
Windows Version: whs
CPU Type: Intel Pent4, 2666 Mhz
HDD: samsung...
Hi DetrieZ
Good. :)
You'll need to talk to a SchedulesDirect expert to fix that.
That is because you haven't configured a blaster. A blaster is the thing that tells the STB to change channels when you change channels in MP. There is a good guide for that -->here<--.
The reason the channels play what the STB is set on is again...
Hi DetrieZ
Good. :)
You'll need to talk to a SchedulesDirect expert to fix that.
That is because you haven't configured a...
MP 1.2
TV Server 1.1.7.0 (single seat)
Windows 7 Pro SP 1 (64-bit)
8gb RAM
Hauppauge HD PVR (model 1212)
2.5tb Storage...
AW: Re: How to setup winLIRC on MediaPortal
I've the same problem - can anyone tell me how i can mapp winlirc and mediaportal ?
i think i have to edit the file, winlirc is using as config, but how ?
WinLirc reacts to the signals of the remote with a green icon - but mediaportal does nothing.
AW: Re: How to setup winLIRC on MediaPortal
I've the same problem - can anyone tell me how i can mapp winlirc and mediaportal ?
i...
Hi, I was trying to setup the WinLIRC plugin in MediaPortal (the one that comes with MP, in Remote > WinLIRC). I Checked the box...
Why would you put MP/program files on another partition?
With a mechanical system drive, I would put Win, MP and program files on the same partition and time-shiftings/recordings on another to minimize fragmentation on your system drive.
When using a SSD it is advised to put time-shiftings on that drive but I wonder what the...
Why would you put MP/program files on another partition?
With a mechanical system drive, I would put Win, MP and program files on...
Okay i have decided to do a clean install of win7 and was wondering where to put Mp also where to put the timeshift & recording...
Hi phmaster
From the logs it appears like the channels are still scrambled, however the tuner/CAM are reporting that they are descrambling them.
Have you tried to view those channels with the same tuner and CAM with any other software?
Alternatively, have you tried to view those channels with the same CAM and an STB?
Can you try to...
Hi phmaster
From the logs it appears like the channels are still scrambled, however the tuner/CAM are reporting that they are...
MediaPortal Version: 1.1.3.0
MediaPortal Skin:
Windows Version: Windows 7 64-bit
CPU Type: Intel Dual E2160
HDD:
Memory: 2Gb...
Hi and welcome billmanz :)
I'm sorry nobody has responded to you before now....
My guess is that the issue is codec related - most likely the audio codec. In your logs I see something unusual happening:
MP inserts 2 audio codecs. I don't see why that is, but it is possibly either the cause or a symptom of the problem. I suggest...
Hi and welcome billmanz :)
I'm sorry nobody has responded to you before now....
My guess is that the issue is codec related -...
MediaPortal Version: 1.1.3.0
MediaPortal Skin: streamedMP
Windows Version: windows 7 professional sp1
CPU Type: e2200 2.2g
HDD...
Sorry don't know how to solve this but on mine i created a new group called it MyTv and copied all the channels that i wanted over to that
Robert
Sorry don't know how to solve this but on mine i created a new group called it MyTv and copied all the channels that i wanted over...
I have the TV server all setup however it retrieved 700+ channels of 28.2E Eurobird/Astra
This includes a lot of channels I can...
Fantastic!!! :D
Enjoy MediaPortal.
Fantastic!!! :D
Enjoy MediaPortal.
MediaPortal Version: 1.20 beta
MediaPortal Skin:
Windows Version: 7 x64
CPU Type: athlon 64 x2
HDD:
Memory: 4gb
Motherboard...
mm,
Ooops! Rookie mistake. You are correct. I was trying to start MP client, not MP server.
FYI, when the initialization screen appears frozen, it is actually a warning window beneath the MP window that is waiting to be clicked "OK". However the PC appears to be locked. This should be moot since this should never happen (unless you...
mm,
Ooops! Rookie mistake. You are correct. I was trying to start MP client, not MP server.
FYI, when the initialization screen...
I am having an issue getting a new install of mediaportal to load. This is my first time installing MP, so maybe I am overlooking...
Why on earth did you run the bdaforserver btw? That should not be needed for WHS2011.
Why on earth did you run the bdaforserver btw? That should not be needed for WHS2011.
Beeing new to the forum (which is great !), I installed Mediaportal on my brand new WHS2011, also followed limpwhizkid's...
A quick search for "ports" in our wiki found this page. ;)
Firewall Settings - MediaPortal Wiki
A quick search for "ports" in our wiki found this page. ;)
Firewall Settings - MediaPortal Wiki
I'm trying to diagnose a problem whereby my client PC will only show TV pictures when the firewall is turned off (on the client)...
Thanks for the reply this is exactly what i was looking for, i set uip the motorised on sat 1 then the fixed on sat 2
Thanks
Robert
Thanks for the reply this is exactly what i was looking for, i set uip the motorised on sat 1 then the fixed on sat 2
Thanks...
Hi looking for some help with the satellite set up in Mp.
I was running a dual dvbs card from an old sky dish set up and...
Brillient thank you for that i must have spent hours trying to figure out what i had done. Its like everthing easy when you know how.
Thanks Again
Paul
Brillient thank you for that i must have spent hours trying to figure out what i had done. Its like everthing easy when you know...
MediaPortal Version: 1.1.3.0
MediaPortal Skin: Standard?
Windows Version: XR Home Service pack 3
CPU Type: AMD Athlon 64x dual...
Hi Steven81
I know this thread is old but in case anyone is reading it in the future...
The speed of channel changing depends mostly on the tuner driver. We generally recommend using the latest drivers for your tuner as they are usually the most optimised in this area. Having said that, there are a few things that you can do to...
Hi Steven81
I know this thread is old but in case anyone is reading it in the future...
The speed of channel changing depends...
Hi, I'm using a Mediaportal enabled HTPC for some time now and I'm dissatisfied from the sluggishness of the "switch channel"...
You might want to see this: https://forum.team-mediaportal.com/newcomers-forum-240/why-does-mediaportal-need-windows-media-player-48971/
You might want to see this...
I tried to install Media Portal on an XP SP3 computer but the installation stalled at the stage of checking for Windows Media...
Currently only by either modifying the code or using debug binary. Basicly both are out of the reach for end user.
Currently only by either modifying the code or using debug binary. Basicly both are out of the reach for end user.
Is there any way to disable this splash screen fade-in when opening MP Configuration? It fades very slooow (about 60 seconds)...
Hi all my problems are solved, not the way I wanted but anyway I finally got surround sound. :)
I suddenly remembered I got an old PC on the loft with a Creative SB Audigy Platinum installed.
So I installed this one and everything works just fine, okay I had to use the ugly Audigy Drive as I needed the optical connection but the...
Hi all my problems are solved, not the way I wanted but anyway I finally got surround sound. :)
I suddenly remembered I got an...
When playing a video I only get sound from my front speakers but no sound from center or rear speakers.
My HTPC is connected...
See here https://forum.team-mediaportal.com/tv-server-plugins-294/request-support-tv-card-realtek-chip-dab-radio-80300/, mm is looking at adding fm\dab support.
Search is your friend :D
See here https://forum.team-mediaportal.com/tv-server-plugins-294/request-support-tv-card-realtek-chip-dab-radio-80300/, mm is...
I have a dvb-t tuner who has the ability to listen to DAB radio FM analog, unfortunately, in the "TV Server" I can only detect the...
Cheers for the update webfaxe - good luck with getting WHS2011 going. :)
mm
Cheers for the update webfaxe - good luck with getting WHS2011 going. :)
mm
MediaPortal Version: 1.1.3
MediaPortal Skin: StreamedMP
Windows Version: WinXP Pro x32 SP3
CPU Type: AMD AnthlonII Quad 2,8GHz...
Sorry for the bump, but I have one more question:
Everything's running quite well right now. But on MKV files and the LAV Filter, there is no possibility of setting the LFE (Subwoofer Crossover) frequency. So AAC Sound sounds a bit flat. And the AC3 Filter does not handle AAC...
EDIT: I think the problem is solved, just had to...
Sorry for the bump, but I have one more question:
Everything's running quite well right now. But on MKV files and the LAV Filter...
MediaPortal Version: 1.1.3 - just downloaded
MediaPortal Skin: default
Windows Version: Win7 Ultimate
CPU Type: Q6600
HDD...
MediaPortal Version: 1.1.2
MediaPortal Skin: Blue 3 Wide
Windows Version: XP Pro SP3 + patched
CPU Type: AMD X2 64
HDD: WD ITB
Memory: 4GB DDR (3 usable)
Motherboard: ASUS M3N-HT Deluxe
Video Card: Onboard
Video Card Driver:
Sound Card: Onboard
Sound Card AC3:
Sound Card Driver:
1. TV Card: FloppyDTV-S
1. TV Card Type...
MediaPortal Version: 1.1.2
MediaPortal Skin: Blue 3 Wide
Windows Version: XP Pro SP3 + patched
CPU Type: AMD X2 64
HDD: WD ITB...
MediaPortal Version: 1.1.2
MediaPortal Skin: Blue 3 Wide
Windows Version: XP Pro SP3 + patched
CPU Type: AMD X2 64
HDD: WD ITB...
I'm getting similar problems. I can use the SiliconDust HDHomeRun with it's own utilities and it finds all the open QAM stations on my service (Mediacom). I was trying to run MediaPortal TV Server Configuration v1.1.3 and it was showing me like 164 QAM channels, but most of them weren't labeled with a station name and when I...
I'm getting similar problems. I can use the SiliconDust HDHomeRun with it's own utilities and it finds all the open QAM stations...
MediaPortal Version: 1.1.3
Windows Version: Win7
CPU Type: Athlon X2
HDD: Seagate 500Gb
Memory: 3Gb
Video Card: HD2600XT
1...
Just a quick word to tell you guys that it now works like a charm. I set the surround speaker to 0.8 and the rest to 1.0 and it works great with my setup !!
thanks again !
Sarlan19
Just a quick word to tell you guys that it now works like a charm. I set the surround speaker to 0.8 and the rest to 1.0 and it...
MediaPortal Version: 1.2 beta
MediaPortal Skin: StreamedMP 1.6.6.2799 Beta
Windows Version: XP SP3
CPU Type: Intel Atom Dual...
Hi Stefan :)
Sorry, I do not recall such an option.
Hi Stefan :)
Sorry, I do not recall such an option.
Hi,
is there a way to set a pin for the tv module?
I can't find a suitable entry in TV-Server-Configuration or...
Thanks in advance for the work.
Thanks in advance for the work.
Spend the whole morning searching through these forums, FAQ's and MePo wiki. But I just don't seem to find any pointers to this...
Thanks, will give it a go tomorrow as I'm gonna rebuild the machine as reset a few things.
Thanks, will give it a go tomorrow as I'm gonna rebuild the machine as reset a few things.
Hi Guys,
I have a question about channel setup. I have a channel list export saved. If I had to do a fresh install of mepo and...