OMG! My Biostar M7NCD+AMD +3200 died about three weeks ago so I had to buy a new mainboard/processor.
MP RC4 was running like a dream before but after the system rebuild I could'nt even start MP at all! Uninstalled MP RC4, installed RC2 with same results! GRRRRRR!
See my signature for current system setup.
At any rate I'm going...
OMG! My Biostar M7NCD+AMD +3200 died about three weeks ago so I had to buy a new mainboard/processor.
MP RC4 was running like a...
Hi there!
Anybody running -64 bit and have a supported tuner to recommend?
NickNero
Kind of an old thread to bump but thought i would thank Freakin for the suggestion to go into the Haali settings and set vsfilter to autoload... 'yes'.
I was having the exact same problem where some files would play in MP and others wouldn't -- all files would play in WMP.
Thanks again!!
Kind of an old thread to bump but thought i would thank Freakin for the suggestion to go into the Haali settings and set vsfilter...
hi, is there away to play .mkv files in media portal?
Hi,
I haven't got any 64 bit system and I haven't been able to test current CVS a lot with .Net 2.0, but for me it's much faster than before the switch to 2.0. So it's definitely a step forward. :)
Kind regards,
Michel
Hi,
I haven't got any 64 bit system and I haven't been able to test current CVS a lot with .Net 2.0, but for me it's much faster...
Does this mean now that .net 2 is out that there will start to be 2 concurrent releases of Media portal down the track one for...
re wewe
Here is one solution to hear audio in 5.1 and good picture quality 8using purevideo)
set in configuraton/televison
Video codec:NVIDIA Video Decoder
Audio codec: AC3Filter (necessary to install AC3Filter and set output to 5.1)
another one important thing:
after MP start you must set in Settings/ Television/...
re wewe
Here is one solution to hear audio in 5.1 and good picture quality 8using purevideo)
set in configuraton/televison...
Been running RC4 since its release, installed release 0.2 yesterday and very very pleased. The whole thing is much snappier...
The problem is probably due to the way the channel and group buttons now works; they've changed from the last official release to this one. The channel button now opens up a dialog box with a listcontrol, so you can scroll thru the channels.
If the skin you are using hasn't been updated to work with RC3 from RC2, you will...
The problem is probably due to the way the channel and group buttons now works; they've changed from the last official release to...
I have just installed the new RC3 and am having problems in MY TV i have retunned all the stations here in brisbane but when you...
Hi,
I'm still on my quest to play Muxed MPEG/DTS music video mpg files. Does the new MyMusicVideo section use the MS Video Dumuxer (which does not suppot muxed MPEG/DTS files) or the MS DVD Demuxer (which does) or some other?
Thanks
Nathan
Hi,
I'm still on my quest to play Muxed MPEG/DTS music video mpg files. Does the new MyMusicVideo section use the MS Video...
Hi,
I'm still on my quest to play Muxed MPEG/DTS music video mpg files. Does the new MyMusicVideo section use the MS Video...
Hi,
please use our Quality Assurance for bug reports:
https://forum.team-mediaportal.com/forumdisplay.php?f=74
Do not forget to fill out your system specs in the User CP to provide the support template.
Thanks! :)
Flip.
Hi,
please use our Quality Assurance for bug reports:
https://forum.team-mediaportal.com/forumdisplay.php?f=74
Do not forget to...
Hi,
It seems the new 0.2.1.0 version does not seem to save its screen calibration settings. I have tried on two machines using...
The problem is we are not working on MP0.2.3.0 but MP1RC, so for every post that says, "i have a problem with the older version", sidetracks the Devs\MP-Team from the current version, which we want working correctly.
Easily half the current posts are from people using old versions of MP, and then wonder why current things (like...
The problem is we are not working on MP0.2.3.0 but MP1RC, so for every post that says, "i have a problem with the older version"...
For people not wanting to install a release candidate on their media center, their should be the latest stable version available...
Notice you are using a T500 which is DVB-T, which at this moment does not support teletext and other interactive services as per this Post.
DVB here involves tuning to a teletext channel (which are not recognised as a channel by MP or MCE), works ok on my actual TV\settop box.
Notice you are using a T500 which is DVB-T, which at this moment does not support teletext and other interactive services as per...
im at work so havent tried the new release on my htpc at home yet. Will the 0.2.3.0 RC1 skins (non bluetwo) still work on the new...
Hi,
To give you another answer:
The more ppl that install RC2 + svn & reports bugs then faster can the final be reached. @ the moment i don't think it will take 2 weeks to reach a new release either RC or final as it all seems now, but that state can change faster then i type so exact i can't tell (maybe i can but wont) ;)...
Hi,
To give you another answer:
The more ppl that install RC2 + svn & reports bugs then faster can the final be reached. @ the...
Hi,
I've been procrastinating on installing the 0.2.3.0 RC, since the existing (older) version I'm currently running is great...
i just did a clean install.
I only have free-to-air TV, and in Australia, that is only 20 channels, so the reconfiguration for TV wasn't too bad.
For movies, i'm just going to download the IMDB info again.
i just did a clean install.
I only have free-to-air TV, and in Australia, that is only 20 channels, so the reconfiguration for TV...
Just wanted to say good job and congratulations to the developers on completing the 1.0 final version :D
Hi Ray,
Thanks for the reply Ray. Yes, I have two Tuners. I don't muck around with any of the Mapping/Combinations etc. I don't really understand it - as far as I know, I don't think I need to. I scan for channels for each card, each one comes up with the same list of channels and away I go. They are however hybrid Cards. But I...
Hi Ray,
Thanks for the reply Ray. Yes, I have two Tuners. I don't muck around with any of the Mapping/Combinations etc. I don't...
Hi,
Just thought I'd ask the question of everyone before I submit logs etc to RC3 bug report forum. Since updating to 1.0 RC3, I...
i am experiencing exactly the same issue, but i cant find 1.0.1. to downgrade to. i can supply the logs if needbe
im running 2.8p4
2.5gb ddr ram
ati hd 4350 gfx
scaleo e
2 x 1.5tb drives
win xp servide pack 2
all net updates etc.
i am also having serious issues with my tv series plugin and sorry to jump on your thread...
i am experiencing exactly the same issue, but i cant find 1.0.1. to downgrade to. i can supply the logs if needbe
im running...
Hi All,
Been running 1.0.1 since release without problems so when 1.0.2 was released I upgraded to that straight away...
Hi there,
You can't "download" SVN builds (ie EXE files to run).
You have to download the Source code (via SVN) and then compile it yourself.
There are instructions in the Wiki :)
J.
Hi there,
You can't "download" SVN builds (ie EXE files to run).
You have to download the Source code (via SVN) and then...
Hi all..
Just a general question...
How does 1.2.0 Alpha compare with 1.1.1 Final in terms of reliability and stability ?
thx
Half-Full-Screen: Check the state of the Area51 builds. You can always use it on top of MP if it does not show any general issues or usage problems for you. Thread is here: https://forum.team-mediaportal.com/threads/call-for-tester-for-1-4-0-features-and-fixes.114566
The HDMI issue is already fixed (no one complained about it...
Half-Full-Screen: Check the state of the Area51 builds. You can always use it on top of MP if it does not show any general issues...
noticed that 1.31 has been removed from the roadmap and the fixes planned for that release now pushed back to 1.40 which is due end...
The problem with MP 1.32 was that the TV Server component was still 32-bit, even when you installed the 64-bit version of the MP client. MP 1.33 will have 32-bit and 64-bit versions of both the MP client and TV Server.
My understanding is that it will not be possible to perform an upgrade install from a 64-bit client + 32-bit TV...
The problem with MP 1.32 was that the TV Server component was still 32-bit, even when you installed the 64-bit version of the MP...
This is on a windows 11 latest rev OS:
This particular component has been very frustrating. I'm a new potential user, trying to...
OK, but I know Genre isn't being imported from xmltv as in the past I have configured the description template to include the Genre at the end of the description but it never showed.
OK, but I know Genre isn't being imported from xmltv as in the past I have configured the description template to include the Genre...
I just upgraded from 1.2.3 and the 2 skins I tried don't clearly show which programs are set to be recorded as they did before. A...
Morning all,
Am I the only one having issues with MePo 1.6? I'm a bit of an amateur at this, but I've had a search around and don't seem to be able to find the answers. I'm struggling with the following after doing a clean install, I was previously on MePo 1.4:
Allmusic Scraper - This was broken in 1.4, so the fix in 1.6 was a...
Morning all,
Am I the only one having issues with MePo 1.6? I'm a bit of an amateur at this, but I've had a search around and...
Morning all,
Am I the only one having issues with MePo 1.6? I'm a bit of an amateur at this, but I've had a search around and...