IPTV (DVB-IP)
IPTV (DVB-IP)
Hello,
Can anyone tell me if MP will do IPTV channels?
Thank you
Bruce
1) There was InfoService plugin. Idon't know if it's compatible with modern MediPortal versions. InfoService
2) The main way to watch stream is OnlineVideos plugin OnlineVideos If it is possible to watch smth it will be possible through it. Here is the thread about Netflix Netflix for OnlineVideos
1) There was InfoService plugin. Idon't know if it's compatible with modern MediPortal versions. InfoService
2) The main way to...
1. How do I configure the RSS feed?
2. How do I watch streaming services such as Netflix and Stan with this MediaPortal1 thingamajig?
I thought it worth mentioning in case someone else with the same problem finds this thread. Not even a long cable either, only 3-4m. Very weird.
I thought it worth mentioning in case someone else with the same problem finds this thread. Not even a long cable either, only...
Hi, new to forum, but not to MP.
Have same issue with MP1 (1.19.0) and MP2 (2.1.3).
Cannot find DVB-T2 TV channels on TV server...
Run Setup program MediaPortalSetup_1.19.0_Final again using Update Option rather than Repair Option.
Run Setup program MediaPortalSetup_1.19.0_Final again using Update Option rather than Repair Option.
I uninstalled 1.18. When I install 1.19 and try to start MP it says TV Plugin and Media Portal don't have the same version (they...
Ok, I had this also and it wasn't the firewall either. It was the Wake On Lan setting on the server PC. My server PC has onboard Intel network interface cards. I only could solve it with the latest network drivers where I enabled Wake On Lan. the previous Wake On Lan implementation was faulty. in the latest drivers it was working...
Ok, I had this also and it wasn't the firewall either. It was the Wake On Lan setting on the server PC. My server PC has onboard...
Hi,
I'm new to MediaPortal and have installed the latest download of version 2. I have configured the TV server and that all...
Yes, I know... and the answer is no.
As it says in our wiki/manual, in terms of capture (ie. not tuners), MediaPortal's TV Server currently supports Hauppauge HD-PVR and Colossus... and that's all. Some capture inputs on analog tuner cards/devices may also work, but in my opinion you're unlikely to find anything in that direction...
Yes, I know... and the answer is no.
As it says in our wiki/manual, in terms of capture (ie. not tuners), MediaPortal's TV Server...
I am attempting to set up a back end PVR for Kodi that will support a 4k capture card and am not having a lot of luck getting the...
you can try the 1.19 PreRelease or wait the final version
you can try the 1.19 PreRelease or wait the final version
I spent several hours reading post after post on trying to get MP to load and play my BD ISO files with menus, without any luck...
MP1
MP2
How to edit the scheduled stop time on a recording with negative minutes to resolve conflicts
DE
I use schedules direct here in the US and it updates nightly so that won't work for me. There probably is no solution. I just realized that even if I could stop my recording early, that does not help with the conflict since it is based on the schedule not my recordings. Thanks for the thought.
I use schedules direct here in the US and it updates nightly so that won't work for me. There probably is no solution. I just...
I get a conflict every time a TV show claims that it stops one minute past the hour. That causes a conflict with the next hour...
In folders on screenshot Thumb/Fanart picture present (with name like folder.jpg, etc)? Try delete ...
--
WBR, ajs :):whistle::coffee:
In folders on screenshot Thumb/Fanart picture present (with name like folder.jpg, etc)? Try delete ...
--
WBR, ajs...
Hi Guys,
Now I've this problem with MP configurations.
My movies collection appears with same icon fan art! See the images
Any...
Thank you
"shares view" is the solution!
Thank you
"shares view" is the solution!
Hi guys,
I configured mediaportal, but when I press Video icon MP shows me "No result found" (please see images)
Where Did I...
I cannot confirm whether 306000 kHz is a valid frequency. In fact a quick google search suggests it is not:
DVB-T Frequency Table for Greece (PAL)
Perhaps you can find the correct frequencies by examining the ArcSoft and/or SichboPVR settings.
Whatever the case, please follow the normal procedure and provide log files as is expected.
I cannot confirm whether 306000 kHz is a valid frequency. In fact a quick google search suggests it is not:
DVB-T Frequency Table...
I have installed in my Windows 10 Pro build 1709 MediaPortal 1. Following the installation guide, I installed the server/client...
Yep me too not sure what really happen but i think i have fixed it for the next 1.19 Final :P
Yep me too not sure what really happen but i think i have fixed it for the next 1.19 Final :P
Hello,
I have been using Media Portal 1 many years now and it has mostly worked very well. But for two days I have no sound in the...
Yep port 555 did the trick. Thanks for your help.
Yep port 555 did the trick. Thanks for your help.
I have two Win10 PCs on my home network. One has MP2 server and client installed and this works fine. On the second PC I have...
I just installed MP2 on a stable Win 10 computer. I have been successfully using James River for watching and recording ATSC TV via my two HD homerun tuners, so I know that all my hardware works. Trying to configure my tuners resulted in an error after the configuration was almost finished. (see attachments)
What next? There...
I just installed MP2 on a stable Win 10 computer. I have been successfully using James River for watching and recording ATSC TV...
I just installed MP2 on a stable Win 10 computer. I have been successfully using James River for watching and recording ATSC TV...
Hi.
Yes, but once you've done this work you will never got any issues matching your videos in any HTPC software again. Good prepared media makes it an easy task to recognize and import them correctly into MP, Kodi, Plex, Emby,...
Hi.
Yes, but once you've done this work you will never got any issues matching your videos in any HTPC software again. Good...
First off, hello to all. I'm in the middle of assembling my HTPC project, and am looking forward to seeing how MediaPortal...
If you really mean a power failure, you need to check the motherboard BIOS to see if there is a setting to control the behaviour. My Dell XPS 420 has such a setting, and I can choose between:
Remain off after a power failure.
Reboot after a power failure.
If your system reboots, "TV Server" starts automatically (because it is a...
If you really mean a power failure, you need to check the motherboard BIOS to see if there is a setting to control the behaviour...
Hi, I'm new to this forum,
and I wish to build a new terrestrial Freeview PVR using a new PC.
So I would welcome some advice on the...
Mmm, I should also say...
Usually Comskip is configured to analyse recordings after they complete. In other words: if you choose to view a recording while it is still completing, you normally shouldn't expect to see commercial markers.
Mmm, I should also say...
Usually Comskip is configured to analyse recordings after they complete. In other words: if you choose...
Nine years ago I tried setting up MP TVServer. I didn't get far, so I ended up going with WMC for several years. Then for the past...
Hi guys
my problem is solved by installing the drivers that came with my ASYS motherboard, \I forgot to do so after reinstalling Windows.
MP now startsup ok.
I now face other issues but I will first do some reading. in the wiki pages FAQ
when you are finished you can close this thread.
Hi guys
my problem is solved by installing the drivers that came with my ASYS motherboard, \I forgot to do so after reinstalling...
Hi
I used to run an old version of Mediaportal, worked fine.
because of update problems with my windows 7, I did a new install of...
Thanks for the message. I did the tests you suggest. I think its either a hardware or Windows fault as well :-(
Thanks for the message. I did the tests you suggest. I think its either a hardware or Windows fault as well :-(
I have completed the installation of MP2 and sorted our my config issues (with a little assistance from the forum - thanks) and I...
All solid now. My error :-(
All solid now. My error :-(
I have had several attempts to install MP2. Faults appear after the twin HD tuners have been installed, and the channel lists...
It allows to add for example movies, series or music files. MediaPortal will then manage the files and download additional information (e.g. content, actors, ...) and FanArt.
It allows to add for example movies, series or music files. MediaPortal will then manage the files and download additional...
I'm brand new to MediaPortal and ejoying getting to know it better.
I have it installed OK and can view and record live TV. I set...
Never mind: Have it now. Not sure what happened. Either I missed the "will you be using MP to watch TV" in the auto install, or that question did not appear. At any rate, I have it now with a "fresh install."
Never mind: Have it now. Not sure what happened. Either I missed the "will you be using MP to watch TV" in the auto install, or...
Previous happy user of MP 1.18 pre-release, for broadcast TV viewing only. New HD with OS reinstalled (Win 7 home premium 32-bit)...
Version 1.18 sorted this problem out thank you!
Version 1.18 sorted this problem out thank you!
I have been using MediaPortal for several years, very happily - not updating as time passed. I have just migrated to a new PC...
Hi,
I've been on a long and frustrating journey with this. All channels appear to be mapped and can be watched using MP2, why can't I get a EGP TV guide to work using the included plugins?
See these two threads:
MP2.1.1 Manual TV Channel Setup
TV Configuration Always Crashes on Channel Search - New Win10 and MP2 Install
Hi,
I've been on a long and frustrating journey with this. All channels appear to be mapped and can be watched using MP2, why...
Hi,
I've been on a long and frustrating journey with this. All channels appear to be mapped and can be watched using MP2, why...
Hello
This happens when an audio or video device - which could be the device that is or should be used for playback - is disconnected or connected.
Refer to the MediaPortal Configuration -> General -> Startup/Resume Settings -> stop playback on removal of an audio renderer
Hello
This happens when an audio or video device - which could be the device that is or should be used for playback - is...
Got a problem with mediaportal. Tv and videos turns themselves off. this is what happens:
[2017-09-29 20:18:15,360] [Log ]...
The captions are missing probably once every two or three minutes.
(In my original post I wrote MPC when I should have written MP.)
The captions are missing probably once every two or three minutes.
(In my original post I wrote MPC when I should have written MP.)
I upgraded to MP1 1.17 and got an error when installing: "invalid file handler 32". I clicked ok and it installed anyway. Now when...
Quick update: tried both cards on my laptop with a fresh reinstall of MP1.18 and both work fine (did the usual tests as per my previous posts, no discontinuities where detected). I'm still convinced that this is not an hardware issue on my HTPC since MP2 and other programs are working just fine. The results with the laptop suggest...
Quick update: tried both cards on my laptop with a fresh reinstall of MP1.18 and both work fine (did the usual tests as per my...
Hi
First of all what a great product Media Portal is, looking like a successor to my WMC set up.
Unfortunately I can't record...
Please read the wiki page that I linked in my previous reply. All possible resolution options are explained there.
No.
Please read the wiki page that I linked in my previous reply. All possible resolution options are explained there.
No.
just installed latest MP. When i hit TV Server Configuration i get this error message.
Any suggestions......
My HW is OK and i've...
Hi
Of course you can watch your photos to music from your playlists on the TV. You can use the built-in slideshow mode or run external screensaver. For example, PhotoScroll screensaver - looks like a screensaver from the Winds Media Center and works great with photos.
Hi
Of course you can watch your photos to music from your playlists on the TV. You can use the built-in slideshow mode or run...
Sorry, but this is really confusing to me. I haven't installed MediaPortal yet because I'm not sure what I am doing... I have a PC...
Great. :)
Great. :)
I have installed, setup media etc. The app seems to be working well. However, when I select a file (movie or show etc.) and...