Problems with the TV-Server or MyTV frontend? Post them in here.
I changed to the HVR-1700.Below you can find the possible switches they offered. Apparantly, the same issue also exists for the PVR-500, I guess that's why they included them here:
these were the options provided by Hauppauge:
PVR-150 switch for HVR-1700: extra 40€
PVR-150 switch for HVR-1300: extra 40€
PVR-500 switch for2 x...
I changed to the HVR-1700.Below you can find the possible switches they offered. Apparantly, the same issue also exists for the...
TV-Server Version: RC3
MediaPortal Version: RC3
MediaPortal Skin:
Windows Version: Vista or XP
1. TV Card: Hauppauge PVR-150...
Found the solution . i had to use the mainconcept mpeg 1 decoder
Found the solution . i had to use the mainconcept mpeg 1 decoder
Hello as state above i have no audio through spdif when watching analog tv. Im using a wintv 250. In every other cas(...
disable / prefer audiostream over language
I managed to fix my zapping speed problem.
I've enabled the option "prefer audiostream over language" in MP - Config/television/tv-client/audio settings. After I disabled this option, the zapping speed decrease from 7 sec. to about 3-4 seconds. Not as fast as possible ... but for the...
disable / prefer audiostream over language
I managed to fix my zapping speed problem.
I've enabled the option "prefer...
Hi together!
I think there are many people out there, who have problems with the zapping speed. I'm one of them :ooops:
Searching...
So can someone explain the difference between these two to me? I have a schedules direct a account from using MythTv, so I'm familiar with that. Is the WebEPG just a free version of the service? Does Schedules Direct give you something that WebEPG doesn't?
I noticed there is a Schedules Direct Plugin, but it seems to be from...
So can someone explain the difference between these two to me? I have a schedules direct a account from using MythTv, so I'm...
So can someone explain the difference between these two to me? I have a schedules direct a account from using MythTv, so I'm...
I have a one seat setup, and whenever I try to select a channel to watch it freezes.
I just installed MP yesterday, so I may be missing some simple configuration step. I use an HDHomerun to get signal from an antenna. I went to the TVServer Configuration and see that it detected that. I had it scan for channels and it added the...
I have a one seat setup, and whenever I try to select a channel to watch it freezes.
I just installed MP yesterday, so I may be...
MediaPortal Version: 1.0.2.0
MediaPortal Skin:
Windows Version: Windows XP Pro, SP3
CPU Type: Intel Atom 330
HDD: 80GB Seagate...
expanding the last post...
Why cant file size be over 1024mb ?? I can imagine that has something to do with disk structure, or something like that.
But it is viable to make files bigger ? I believe there is a bug related to long pauses, then making timeshift file bigger would avoid this sometimes.
expanding the last post...
Why cant file size be over 1024mb ?? I can imagine that has something to do with disk structure, or...
I have a question I cannot find in the manual.
I want to increase my timeshift time.
For that I guess I have to be in TV Server...
Sorry guys,
I don't want to bother you ... but this problem makes me crazy.
Maybe you need other logs or any other informations!?
Maybe another problem helps you to point me in the right direction ...
This problem exist on every client!
I've also periodic stutter/screen freezes (every two seconds for a short moment) in...
Sorry guys,
I don't want to bother you ... but this problem makes me crazy.
Maybe you need other logs or any other...
I managed to fix my problem. I've enabled the option "prefer audiostream over language" in MP - Config/television/tv-client/audio...
MediaPortal Version: 1.0.1
MediaPortal Skin: Blue3Wide
Windows Version: Vista x64
CPU Type: Athlon Dual core 3.0 Ghz
HDD: 2 Tera Bytes
Memory: 3 gigs Corsair
Motherboard:
Video Card: Nvidia Geforce 8800 GTS
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Hauppauge HVR-1600
1. TV Card...
MediaPortal Version: 1.0.1
MediaPortal Skin: Blue3Wide
Windows Version: Vista x64
CPU Type: Athlon Dual core 3.0 Ghz
HDD: 2...
MediaPortal Version: 1.0.1
MediaPortal Skin: Blue3Wide
Windows Version: Vista x64
CPU Type: Athlon Dual core 3.0 Ghz
HDD: 2...
Anyone?
Anyone?
Hello,
been messing around with this, hopefully you can help.
I installed MediaPortal, including the TV server. I set it up and...
Oh yeah.
How dumb am I. the answer was right in my face.
Oh yeah.
How dumb am I. the answer was right in my face.
Hi All.
I have a two cards on my TV server one DVB-S and the other DVB-T
Following todays freeview changes I have made a right...
Any news from the team?
At least give us some indication on the plan, please.
Any news from the team?
At least give us some indication on the plan, please.
TV-Server Version: TV Server 1 SVN 16617
MediaPortal Version: MP1 (stable)
MediaPortal Skin: Default Blue2
Windows Version: XP...
^ I believe this issues is resolved now. Please try next public SVN
^ I believe this issues is resolved now. Please try next public SVN
MediaPortal Version: 1.1.0.0 BETA
MediaPortal Skin: Default
Windows Version: MCE SP3
CPU Type: Intel 2.6Ghz Dual Core
HDD...
I've tried to change mpeg2 decoder in mp config. and nothing :/
I have these decoders:
- ArcSoft Decoder
- ATI CC Multiplexer
- ATI Mpeg Multiplexer
- ATI Mpeg Video Decoder
- CyberLink Video Decoder
- DScaler VD
- Elecard VD
Which should I use?
As I said before in PRV2 everything works. Not I don't have TV server installed
I've tried to change mpeg2 decoder in mp config. and nothing :/
I have these decoders:
- ArcSoft Decoder
- ATI CC Multiplexer
-...
MediaPortal Version: 1.0.0
MediaPortal Skin: StreamedMP
Windows Version: XP SP3
CPU Type: AMD 3.2+
HDD: WD 500 GB
Memory: 1GB...
someone recommended using handbrake, here is the link
https://forum.team-mediaportal.com/mediaportal-1-talk-45/calling-all-mp-new-zealanders-both-you-2321/index213.html#post394487
someone recommended using handbrake, here is the link...
TV-Server Version: TVEngine3 Snapshot: 07-13-2007 15-43h Revision 15172
MediaPortal Version: MediaPortal SVN-Snapshot: 07-14-2007...
Anyone have the same problem?
Anyone have the same problem?
TV-Server Version: 1.0.2.0
MediaPortal Version: 1.0.2.0
MediaPortal Skin: Theatre
Windows Version: Win XP SP3
CPU Type...
There's a retune in couple of days in the UK. Does anyone know if we're going to need a new frequency xml file again? Or is it just shuffling channels around the muxes?
There's a retune in couple of days in the UK. Does anyone know if we're going to need a new frequency xml file again? Or is it...
There's a retune in couple of days in the UK. Does anyone know if we're going to need a new frequency xml file again? Or is it...
no overlay II
Ah, another info:
The overlay works on WinTV application!
Marcus
MediaPortal Version: 1.0.1
MediaPortal Skin: default
Windows Version: XPsp3
CPU Type: intel dual core 2.8ghz
HDD: Seagate 80gb + NAS
Memory: 4 gb Corsair XMS2 DDR2
Motherboard: Intel DG45ID
Video Card: Intel G45 Onboard
Video Card Driver...
no overlay II
Ah, another info:
The overlay works on WinTV application!
Marcus
MediaPortal Version: 1.0.1
MediaPortal...
Friends,
My MP works fine, including TV reception, but I have a minor fail:
I can see TV/video only full screen. On menus I...
Update,
Have WinTV7 working fine with the Radio, no breakups, finds all stations etc. Mediaportal however finds a couple false stations (just static) and misses all the strong ones. Manually set a station, some will tune with lots of station, some won't.
Why would WinTV Work and give good signals but not MP? Wouldn't both just...
Update,
Have WinTV7 working fine with the Radio, no breakups, finds all stations etc. Mediaportal however finds a couple false...
Mediaportal 1.02
HVR 2250, was having problems with radio, Haupauge sentme new beta wintv s/w, installed, radio worked fine in...
Got it working
I've got BBC HD working now. Installed "HD Pack 2.2" and used the PDVD9 H264 codec. Works well.
Rob
Got it working
I've got BBC HD working now. Installed "HD Pack 2.2" and used the PDVD9 H264 codec. Works well.
Rob
TV-Server Version: 1.0.2
MediaPortal Version: 1.0.2
MediaPortal Skin: Blue3 Wide
Windows Version: XP Home SP3
CPU Type: AMD...
Does anyone know how to setup a Cable STB that is hooked up through firewire? There are old threads that discuss a CaptureCardDefinitions.xml and using GraphEdit. I cannot find this xml file on my computer and I have enabled hidden files as well as viewing of protected OS files. I am suspecting that with the newer version of MP...
Does anyone know how to setup a Cable STB that is hooked up through firewire? There are old threads that discuss a...
Does anyone know how to setup a Cable STB that is hooked up through firewire? There are old threads that discuss a...
Can you delete it?
I was trying to start one but it opened before I could finish the correct thread title. I can't figure out how to delete it.
Can you delete it?
I was trying to start one but it opened before I could finish the correct thread title. I can't figure out how...
MediaPortal Version: 1.0 Final
MediaPortal Skin: Blue 3
Windows Version: Windows XP SP3
CPU Type: Dell 2.4GHz Pentium 4M
HDD...
I too have experienced this with ffdshow and 1.0.2, if you have topbar installed the little backwards arrow thing will get you back to the home page.
I too have experienced this with ffdshow and 1.0.2, if you have topbar installed the little backwards arrow thing will get you back...
MediaPortal Version : 1.0.2
MediaPortal Skin: StreamedMP
Windows Version: Vista SP1
CPU Type: AMD ATHLON
HDD:
Memory...
pressing the power button on your case usually will bring out of s3 sleep too
pressing the power button on your case usually will bring out of s3 sleep too
Unless it has changed recently the MP implamentation to run iMon VFDs is useless as it does not allow the remot to work while the...
After a large number of new reminder emails to Hauppauge support I got another mail today:
I think he's missing the solution 'never buy Hauppauge', but at least they're clear on that their support is junk.
After a large number of new reminder emails to Hauppauge support I got another mail today:
I think he's missing the solution...
TV-Server Version: 1.0.1 Final
MediaPortal Version: 1.0.1 Final
MediaPortal Skin: Aeon Wide
Windows Version: Windows XP Home NL...
Thanks for the answer, seems to me that i should give up on this then, maybe it will get solved in a near future
Tried with the CI.exe running and now it works, better than nothing :)
Thanks for the answer, seems to me that i should give up on this then, maybe it will get solved in a near future
Tried with the...
MediaPortal Version: 1.1 beta
MediaPortal Skin:
Windows Version: win7 rc
CPU Type: i7 920
HDD: 640gb samsung f1
Memory: 3gb...
Hi,
I found the reason for this issue :D
The used memory was not supported by my mainboard: I used 4GB and the board supports only 3GB.
Unfortunately all other applications run without any effect, so I didn't realize my memory issue.
Now it works: TV Server from MP 1.1.0_Beta-1_rev23491 works with Win7 x64 RTM.
I still have...
Hi,
I found the reason for this issue :D
The used memory was not supported by my mainboard: I used 4GB and the board supports...
MediaPortal Version: 1.0.4.23491
MediaPortal Skin: Default
Windows Version: Vista SP2 / Win7 RTM
CPU Type: Intel P4, 3GHz
HDD...
Hi,
I'm searching a solution to use Win7 MCE with a remote TV server and found discussions on MP TV Server plus a MCE plugin "My TVServer Client". This could solve my problem.
Unfortunately the discussions are a long time back and the links to download the plugin are no longer valid.
Does anybody know if this plugin is still...
Hi,
I'm searching a solution to use Win7 MCE with a remote TV server and found discussions on MP TV Server plus a MCE plugin "My...
Hi,
I'm searching a solution to use Win7 MCE with a remote TV server and found discussions on MP TV Server plus a MCE plugin "My...
Just to update my experience with the jumping video...
There were 2 reasons I found that I was experiencing jumpy video on the clients.
1. - Crappy, Cheap Network Switch!
I have a my 4 port ADSL modem connected to an 8 port switch in the lounge that connects a number of devices (HTPC, PS3, DVR, Wireless Access Point) After...
Just to update my experience with the jumping video...
There were 2 reasons I found that I was experiencing jumpy video on the...
Hello Everyone
I've been using Media Portal in a single seat setup for over 2 years with a dual digital tuner with hardly any...
True, it's not a big issue :). One could also argue that it's more important to make sure that the DHCP is always available. In my case the server uses a reserved lease from the DHCP anyway. But still, it's always easier to not have to type in the IP, Gateway and DNS and maybe subnet "everytime" and simply rely on your DHCP.
Just...
True, it's not a big issue :). One could also argue that it's more important to make sure that the DHCP is always available. In my...
I noticed a small problem regarding the way the TvServer connects to itself or the tv cards. The TvServer seems to obtain the...
Could someone perhaps try to test whether this bug is still there on 1.1? Should be reported in that case....
Could someone perhaps try to test whether this bug is still there on 1.1? Should be reported in that case....
TV-Server Version: 1.0
MediaPortal Version: 1.0
MediaPortal Skin: Blue 3
Windows Version: XP Pro SP3
CPU Type: Intel Core 2...