- Sticky
The MediaPortal HTPC Hardware Section may already have the information you require so check it first
HTPC Hardware Section:
http://wiki.team-mediaportal.com/4_HTPC/HTPC_Hardware
HTPC TV Cards Section:
http://wiki.team-mediaportal.com/4_HTPC/HTPC_Hardware/TV_Cards
HTPC Showroom:
http://wiki.team-mediaportal.com/4_HTPC/Showroom
Is...
The MediaPortal HTPC Hardware Section may already have the information you require so check it first
HTPC Hardware Section...
The MediaPortal HTPC Hardware Section may already have the information you require so check it first
HTPC Hardware Section...
- Sticky
I know this is an old thread, but does somebody have " FloppyDTV LED Sequence explanation " document laying around ?
My card is acting strange with 7 flashing then green (very short) and start over again.
Thanks
Kickin
I know this is an old thread, but does somebody have " FloppyDTV LED Sequence explanation " document laying around ?
My card is...
if you have some problems with the FloppyDTV S2 not beeing recognized after standby/shutdown please have a look at this info:
I have a TBS 6284 PCIE card, which is an older quad-tuner DVB-T/T2 card. The tuners are significantly more sensitive than my Pinnacle 2000i DVB-T dual tuner card (and hence less likely to exhibit pixelation), but noticeably less sensitive than the tuner in my Sony TV.
The Pinnacle card has been "rock solid" -- no problems at all. But...
I have a TBS 6284 PCIE card, which is an older quad-tuner DVB-T/T2 card. The tuners are significantly more sensitive than my...
Looking for recommendations for Dual DVB-S2 and Dual DVB-T2 PCIE tuner cards?
I am based in Ireland.
Looking mainly at TBS cards...
Hello,
I looked at it again yesterday evening and after changing in the BIOS -> Boot -> Type of operating system from "Windows UEFI mode" to "Other operating system" the driver is probably running
Hello,
I looked at it again yesterday evening and after changing in the BIOS -> Boot -> Type of operating system from "Windows...
Hello,
my TV cards, one is a V6 S2, will not run under Win10 in a ASUS PRIME H410M-E. The Device Manager will show a problem...
During the entire last 10+ years using MP with an Hauppauge HVR-2250 tuner, I've never had any problem at all recording any 2 clear QAM channels simultaneously -- until last July.
Last July, my cable company decided to 'reorganize' their channels. This included, for the first time, placing two HD channels in the same frequency band at...
During the entire last 10+ years using MP with an Hauppauge HVR-2250 tuner, I've never had any problem at all recording any 2 clear...
During the entire last 10+ years using MP with an Hauppauge HVR-2250 tuner, I've never had any problem at all recording any 2 clear...
A little bit noisy but working just fine.
And drivers are OK, because signal values are good ! :)
A little bit noisy but working just fine.
And drivers are OK, because signal values are good ! :)
For info :
Just received my new 8 tuners TBS card to replace my 2 X 2 tuners DVB-T cards :
Spécifications here ...
hi all
because of my new tv-card WinTV-quadHD DVB-C i need to scan channels with symbol rate 6900000.
but i don't have a transponder-list of my provider so with my old card i used "search for transponder list" to make a full scan.
is it possible to change the symbol rate for "search for transponder list" to 6900000?
kind regards
ste
hi all
because of my new tv-card WinTV-quadHD DVB-C i need to scan channels with symbol rate 6900000.
but i don't have a...
hi all
because of my new tv-card WinTV-quadHD DVB-C i need to scan channels with symbol rate 6900000.
but i don't have a...
I have a Hauppauge WinTV-HVR-1255 TV card that suddenly started missing channels 10 and 17. It gets 6,13,23. I just checked the antenna and it seems fine. I am wondering if the problem is with the card or a signal amplifier I use because I am in a fringe area.
I have a Hauppauge WinTV-HVR-1255 TV card that suddenly started missing channels 10 and 17. It gets 6,13,23. I just checked the...
I have a Hauppauge WinTV-HVR-1255 TV card that suddenly started missing channels 10 and 17. It gets 6,13,23. I just checked the...
It will be dependent on the channel's frequency. Off the top of my head I think it's lower frequencies that are more susceptible as they are closer to the frequency of the usual sources of environmental interference.
Of course it could just be that the firetv has a better quality tuner in it [emoji6]
It will be dependent on the channel's frequency. Off the top of my head I think it's lower frequencies that are more susceptible as...
Let me be very clear, I'm not asking for help to get my tv cards working better.
I'm asking for an explanation.
I have been using...
During the last evenings, I made some further examinations about the HTC and the HVR930C. Of course, the fact that both sticks use nearly the same hardware causes half of the trouble. But not all.
I tried to install thee different Empia-Devices: the two sticks mentioned before, and then also the PCTV 520e. All the drivers are...
During the last evenings, I made some further examinations about the HTC and the HVR930C. Of course, the fact that both sticks use...
My System:
Windows 7 Pro 64bit
MediaPortal 1.18
Client + Server on the same machine
Core i7 - enough processor power for...
Thanks MM, you are confirming what I suspected. However, as regards to Webstreaming radio, that is great when it works, but if you have a spotty internet connection the OTA broadcasts are a better source. For my setup, internet radio streams work, don't integrate as well either, they become a different set of menus. I was wondering if...
Thanks MM, you are confirming what I suspected. However, as regards to Webstreaming radio, that is great when it works, but if you...
I'm in central Ohio, and I have an HVR 2250, that receives FM radio, but doesn't seem to extract the Radio Data System information...
Thanks for posting the drivers - worked great for me after a few years of being out of the PVR community. Big thanks! :)
Thanks for posting the drivers - worked great for me after a few years of being out of the PVR community. Big thanks! :)
Hi, long shot but anyone got a copy of the blackgold drivers for their tv cards? I need 8.1.1.1 or 8.1.1.2.
There website download...
Just added QuadHD TV Tuner to my system and it works great.
Just added QuadHD TV Tuner to my system and it works great.
Hello
I am currently looking at TV Tuner Cards and I came across the Hauppage QuadHD TV Tuner and I was wondering if it would...
TV Cards - MP Home Theatre PC - MediaPortal Wiki
If you have read the wiki pages and still have problems you will need to explain your current settings and post logs/screenshots.
TV Cards - MP Home Theatre PC - MediaPortal Wiki
If you have read the wiki pages and still have problems you will need to explain...
Hello everyone,
I have a TBS8922 and motor sm3d12s. I can not run the antenna.
There is a guide to configure the settings? There is...
Thanks @mm1352000!
I have dropped an email to Technotrend, lets see if they help out.
This card has served me really well for many years without problems. I rebuilt my htpc and fumbled with it(dropped it from low altitude), but it is really rare that a soldered two joints SMD falls of like this. It seems to be part of a LC-filter...
Thanks @mm1352000!
I have dropped an email to Technotrend, lets see if they help out.
This card has served me really well for...
Hi
I know this is a long shoot, but here it goes.
For some reason one SMD capacitor seems to have jumped off my board. If anyone...
Hallo Zusammen,
ich möchte mir eine TV-Karte kaufen hauptsächlich zum Aufnehmen von Sendungen. Es wäre nett wenn Ihr mir ein bisschen Kaufberatung geben würdet.
Vielleicht hat ja jemand eine zuhause oder kennt sich aus.
Es sollen Hauptsächlich die freien HD Sender aufgenommen werden. (ARD, ZDF, ServusTV, ZDF, 3SatHD, ArteHD...
Hallo Zusammen,
ich möchte mir eine TV-Karte kaufen hauptsächlich zum Aufnehmen von Sendungen. Es wäre nett wenn Ihr mir ein...
Hallo Zusammen,
ich möchte mir eine TV-Karte kaufen hauptsächlich zum Aufnehmen von Sendungen. Es wäre nett wenn Ihr mir ein...
From what I remember you can buy just the tuner or tuner and remote as a kit.
My 2215 came with a USB ehome receiver.
From what I remember you can buy just the tuner or tuner and remote as a kit.
My 2215 came with a USB ehome receiver.
Hi all,
I'm in the process of upgrading my htpc and will need a new tuner, current hauppauge is a PCI one. Was looking at the...
Yeah, there aren't too many options.
You can get 8 tuners on one card:
http://www.digital-devices.eu/shop/en/tv-cards/tv-cards-for-pcie/271/8-tuner-tv-card-dvb-c2/t2-isdb-t-dd-max-a8i-tv-card?c=156
There are a range of other Digital Devices configurations that would result in 4 or more tuners, including:
bridge (Octopus, Octopus...
Yeah, there aren't too many options.
You can get 8 tuners on one card...
I've been looking for a replacement for my digialtnow quad card (no longer made)and this looks very good.
Anyone have a hauppauge...
Got it! Thanks
Got it! Thanks
Does MediaPortal support more than four tuners?
I ask because the 'Scanning' page in 'TV Server Configuration' only has tick boxes...
Quality mate. I will try this ASAP! Thanks for your help!
Quality mate. I will try this ASAP! Thanks for your help!
I need some help / info regarding running a DVBS2 card on a mobo that has legacy pci interface.
I decided that it was about time...
Great!! Thank you for your reply.
It works fine when I test it, now I will run whith this setting for some days and report back.
Great!! Thank you for your reply.
It works fine when I test it, now I will run whith this setting for some days and report back.
I have been using MP for several years and all the time I have used (digital everyware?) DVB-S FireDVT BDA tuner DVBS2 (and also a...
Not directly, because their streams are not compatible.
The only possibility would be via something like the VODServer "plugin":
https://forum.team-mediaportal.com/threads/vodserver-watch-internet-streams-as-tv-channels.121732/
Not directly, because their streams are not compatible.
The only possibility would be via something like the VODServer "plugin"...
I live in an area which has woodland next to our property and proximity of the taller oak and ash trees are making it very...
That's great news! Thanks for the update Hubert. :)
That's great news! Thanks for the update Hubert. :)
Hi all,
I'm using already for more than 10 years Mediaportal in combination with Twinhan DVB-T receiver, watching the FTA and...
Hi,
Thank you for your tips. I managed to install the Win 7 FireDTV 5.7 Beta driver.
Hi,
Thank you for your tips. I managed to install the Win 7 FireDTV 5.7 Beta driver.
Hi everybody,
I use Digital Everywhere FireDTV S2 as TV-card. When I installed Win10 64 bit, it turned out (as expected before)...
Hi guys.
Thanks for your suggestion. It came in just the last minute, as I was about to return it to the vendor.
If you had waited just one more day to reply, I would have sent it back.
The real issue here was that I had bought my new HTPC (Skylake CPU and the works) and the tuner seperately, and the tuner arrived before the...
Hi guys.
Thanks for your suggestion. It came in just the last minute, as I was about to return it to the vendor.
If you had waited...
I recently bought a Terratec H7 rev 4 card, which I wanted to use in my new HTPC, that I just built, but I keep getting BSODs when...
Short update. I got the DVB-C Stick today and it seems to work quite well (y)
Short update. I got the DVB-C Stick today and it seems to work quite well (y)
Hi guys,
I just bought a AVerMedia TD310 USB Stick for DVB-T2, DVB-T and DVB-C and I cannot find any channels with MediaPortal TV...
Appreciate the quick response :)
Appreciate the quick response :)
Hello guys,
I am looking for a new card to buy since my skysta hd2 doesnt want to work in mp with motor setup.
I was using an old...
Good things? :eek: They seem to have significantly reduced their range of products, possibly because of comments like these:
https://www.amazon.co.uk/product-reviews/B004V2LKT8/ref=cm_cr_dp_hist_one?ie=UTF8&filterByStar=one_star&showViewpoints=0
But perhaps others have had better experiences?
-- from CyberSimian in the UK
Good things? :eek: They seem to have significantly reduced their range of products, possibly because of comments like these...
Am I right in thinking that to avoid a common issue of failed initialisation of tuners after waking from s3, its best to go for a...
Yes I saw that. Thank you for the confirmation.
Yes I saw that. Thank you for the confirmation.
I am getting tired of the big box for my media centre (and having to fight with it just to watch TV) so I am looking at using one...
That driver version is the one that I am using at the moment, but it does not cure the wake-from-sleep problem. :(
My recollection is that the TBS Developers always maintained that the problem was caused by incorrect motherboard BIOS, and several users reported on the TBS forum that they obtained fixes from their various motherboard...
That driver version is the one that I am using at the moment, but it does not cure the wake-from-sleep problem. :(
My recollection...
FIXED - SEE LATER THREAD ON PAGE 2
I have recently installed a TBS-6205 DVB-T2 PCIE (4 tuners) card along with my existing...
Recently the problem occured again after unplugging the power cord for some time. This time i had the idea to have a closer look to the chipset drivers. I installed the older INF Update Utility - Primarily for Intel® 6, 5, 4, 3, 900 Series Chipsets version: 9.2.0.1030. While doing that the utility noticed that version 10.0.27 was...
Recently the problem occured again after unplugging the power cord for some time. This time i had the idea to have a closer look to...
Hello,
after using MediaPortal on Windows 7 for some years it has been time for a new one now.
I built a new PC with Windows 10...
Cascaded CAMs (multiple CAMs linked to one tuner) are not supported. Aside from that, no known problems. Having said that, your product is very new. I'm not aware of anybody who has tested it before now. So, I suggest you provide log files.
Cascaded CAMs (multiple CAMs linked to one tuner) are not supported. Aside from that, no known problems. Having said that, your...
Hello,
i cannot access the cam menu (unicam 4.0) with my new octopus CI S2 pro:
the selected card doesn't support CI menu or Cam...