Codecs
Codecs
hi folks,
mkv hd files are playing without video, only audio.
I have a HD bitstream intel motherboard with dts-hd support.
This...
this has improved it massively!!! but.... there are still the odd glitch here and there. think its due to the nVidia graphics card.... might look for a ati suitable
this has improved it massively!!! but.... there are still the odd glitch here and there. think its due to the nVidia graphics...
Hello, im having a problem and its litterally making me pull my hair out! i have a multiroom setup and i just cant get live HD tv...
I have a dual monitor setup. My primary monitor is for my pc and the secondary monitor is my TV that I have Mediaportal defaulted to start up on. When I use Arcsoft TotalMedia Theater 5 as my external player to play bluray movies through Moving Pictures it loads TMT5 just fine but its on the primary monitor. I'd like to default it to...
I have a dual monitor setup. My primary monitor is for my pc and the secondary monitor is my TV that I have Mediaportal defaulted...
I have a dual monitor setup. My primary monitor is for my pc and the secondary monitor is my TV that I have Mediaportal defaulted...
I recently upgraded to MP 1.2.3 from MP 1.1.3 due to outdated plugins and now have an issue with my Online video setup.
The video play back streams ok from the net and buffers well ahead by it is choppy and stagnates in playback. I have tried the LAV filters and the ffdshow filters without success. I can playback television...
I recently upgraded to MP 1.2.3 from MP 1.1.3 due to outdated plugins and now have an issue with my Online video setup.
The video...
I recently upgraded to MP 1.2.3 from MP 1.1.3 due to outdated plugins and now have an issue with my Online video setup.
The video...
Just been thru this. Most amps cant decode 5.1 pcm (aac) so will output only 2 channel.
I am using LAV. Had to untick acc in the LAV audio. Installed ffdshow for audio and enabled only aac. Now set ffdshow to covert aac to ac3.
Go into MP Config and set aac to use ffdshow. Now aac will be sent thru to your amp as 5.1 ac3 which it can...
Just been thru this. Most amps cant decode 5.1 pcm (aac) so will output only 2 channel.
I am using LAV. Had to untick acc in the...
Hi People,
I am currently running mpv: 1.2.3 with powerdvd12 codecs registered and used.
I have passthrough on all audio, dts...
Have you checked that the extension on the file are supported (if are same as other files, then ignore below:-?
MediaPortal Config, within the Video's section, click on video extension, and add extension for files not playing if it's not in list.
TTFN - JCMP
Have you checked that the extension on the file are supported (if are same as other files, then ignore below:-?
MediaPortal...
Guys,
I have Mediaportal 1.2.3 on Windows 7 64-bit with Sp1 and all p0atches as of 2 weeks ago.
I have downloaded a movie pack...
I tried it right now.
When i unchecked "Autocreate thumbs" the movies became unwatchable. I can hear the sound but the image freeze.
When i changed it back it made things better but video is still unwatchable.
I tried it right now.
When i unchecked "Autocreate thumbs" the movies became unwatchable. I can hear the sound but the image...
Hi,
In the past few days I tried to make my videos played smootly with dynamic refresh rate.
I was unsuccesful until today.
I...
SUCCESS! Thank you so much! Switching to LAV for the video decoders did the trick. I am now smoothly running at ~24frames for all the videos I tried.
As a rule, is this the decoder configuration I should have been using from the start? I was initially setting up using this guide on the wiki, and it instructed to use the MS ones for...
SUCCESS! Thank you so much! Switching to LAV for the video decoders did the trick. I am now smoothly running at ~24frames for all...
Hey all,
I'm totally new to MP, but I've got a bizarre playback issue going on that I'll try to explain -- hopefully someone out...
LOL, thanks for helping an almost blind user. "LAV Video Decoder" and "LAV Audio Decoder" looked very similar together, and the tab was called "Video Codecs" only which helped making them even more similar.
LOL, thanks for helping an almost blind user. "LAV Video Decoder" and "LAV Audio Decoder" looked very similar together, and the tab...
I'm probably missing something basic, but are we supposed to be able to use LAV filters as a codec in MediaPortal? I installed LAV...
TMT 5.x.
1. Ensure you are opening uMCEPlayer5.exe from MediaPortal and not uTotalMediaTheatre5.exe
2. When you click 'Stop' on your MCE remote then uMCEPlayer should close automatically and take you back to MediaPortal. If not then try clicking 'Back' on the remote.
The above works fine for me with MP 1.2.3, Streamed MP and TMT 5.3...
TMT 5.x.
1. Ensure you are opening uMCEPlayer5.exe from MediaPortal and not uTotalMediaTheatre5.exe
2. When you click 'Stop' on...
i am wondering how do i exit powerdvd/totalmedia player when i finish watch 3d bluray. i need to use the MCE remotei control and...
That works! Thank you.
That works! Thank you.
EDIT: ced007 found a solution: https://forum.team-mediaportal.com/threads/lav-and-subtitles.108773/#post-875564
I struggle to set...
His receiver support different HD sound formats, spdif doesent support hd sound. So when playing mkv with dts/dd hd sound formats he only will get good plain old dts or dd...
ffdshow is good, but i feel that i getting better picture quality using lavfilters.
His receiver support different HD sound formats, spdif doesent support hd sound. So when playing mkv with dts/dd hd sound formats...
I have MP 1.2.3, with StreamedMP (1.7.7.3113), running on Win 7 x64 SP1 (fully patched etc).
Codec wise, I have only installed...
Been a while since last posting.
I've been converting my DVD library to mkv to save room on my server. Since converting I'm finding out that the mkv's are crashing one of my media machines running MediaPortal 1.2.2 using the SAF6 codecs. I do have other codecs on the computer while I was experimenting.
Now I have two other...
Been a while since last posting.
I've been converting my DVD library to mkv to save room on my server. Since converting I'm...
Been a while since last posting.
I've been converting my DVD library to mkv to save room on my server. Since converting I'm...
I have been using MP for well over 5 years. Only recently after I got the Unlock for SAF have I experienced a truly stable system. No more Codec issues. God knows how many weekend I spent tinkering with the settings.
Well worth a message to Hoborg. :)
I have been using MP for well over 5 years. Only recently after I got the Unlock for SAF have I experienced a truly stable system...
Hi, I'm reading about SAF codec pack (LAV) and something about unlocking SAF. I'm not clear what this unlocking means... What is...
I had installed saf but had not enabled hardware acceleration... things run a lot smoother now. Thanks anyway.
I had installed saf but had not enabled hardware acceleration... things run a lot smoother now. Thanks anyway.
I've MP setup with 4therecord for watching live tv. Occasionally I experience some stutter. The image and sounf freezes for an...
tried everythink. constant, peak averange. 1-100% bitrate on 27 cable channel in germany.
Any way to test if its the tv server or encoder?
tried everythink. constant, peak averange. 1-100% bitrate on 27 cable channel in germany.
Any way to test if its the tv server or...
Hello,
I have tried to get Analogue Tv working with software/hardware encoders. Software encoding has a not acceptabel quality...
After some investigation I found in the general > software encoder section that the TV server things there are no software encoders installed. The whole list is flagged 'no'. I then checked GraphEdit and found the now four mpeg encoders i installed (intervideo, mainconcept, avermedia and some more) so they are on my system. I...
After some investigation I found in the general > software encoder section that the TV server things there are no software encoders...
Dear all,
Since I recently found out about the TV server functionality of mediaportal and because I am a opensource fan, I wanted...
Hello
I am using LAV with DXVA2 native via a SAF 6.1.0 installation, on my AMD E350 client.
When i play a video, the section in the lav settings that says 'Active Decoder' always says <inactive>.
I guess i would have expected this to change when playing a video. Processor is around 30-35% on a full bluray mkv rip, and goes to 100%...
Hello
I am using LAV with DXVA2 native via a SAF 6.1.0 installation, on my AMD E350 client.
When i play a video, the section in...
Hello
I am using LAV with DXVA2 native via a SAF 6.1.0 installation, on my AMD E350 client.
When i play a video, the section in...
Hi guys,
I get this error msg sometimes simply by playing recorded videos and restarting the client solves it.
Because I had different other issues as well, I did a clean install of v1.2.3 - after having uninstalled server & client completely + LAV filters.
Now I'm running MP almost with default settings and no plugins because I...
Hi guys,
I get this error msg sometimes simply by playing recorded videos and restarting the client solves it.
Because I had...
Hi guys,
I get this error msg sometimes simply by playing recorded videos and restarting the client solves it.
Because I had...
https://forum.team-mediaportal.com/threads/tvlibrary-tvexception-unable-to-add-unable-to-connect-audio-compressor-muxer.107440/#post-860924
there are some links to trials. And you can find ATI AVIVO DirectShow encoder version in Google (be aware that new ATI Media encoders are for Media Foundation and do not supported by MP) :)
https://forum.team-mediaportal.com/threads/tvlibrary-tvexception-unable-to-add-unable-to-connect-audio-compressor-muxer.107440/#post...
Where can i find a supportet audio encoder for the latest Media Portal?
A test version should be fine.
du redest hier über kauf-br?
das wird mit dem bdhandler alleine nicht funktionieren (kopierschutz),
es würde dann noch der fuchs benötigt, ob es mit dem funktioniert kann ich aber auch nicht wirklich sagen.
zweite und legale möglichkeit ist den pdvd als externen player einzubinden...
du redest hier über kauf-br?
das wird mit dem bdhandler alleine nicht funktionieren (kopierschutz),
es würde dann noch der fuchs...
Sehr verehrtes Forum,
bisher konnte ich mir immer selbst helfen, muss jedoch erstmalig eure Hilfe in Anspruch nehmen.
Ich habe...
This can be set in MP Config: go to the Audio Settings tab of the TV Client and activate "Prefer AC3-Sound"
However, this setting also forces AC3 when better sound is available. For example DVD's will also play as AC3 instead of DTS and you will nedd to activate the latter manually.
Regards, HTPC_Sourcer
This can be set in MP Config: go to the Audio Settings tab of the TV Client and activate "Prefer AC3-Sound"
However, this setting...
New to Media Portal, long time WMC user. I've been converting all my DVDs to m4v using basically Handbrake's AppleTV 2 preset...
Hi,
I have a stereo only installation, and I'm looking for the best audio quality in both music and videos (I have a lot of DVD/Bluray rips concerts)
I'm using the intel mainboard spdif output, that is connected to my stereo DAC.
So I'm a little bit confused with choosing the best settings.
Bit-Perfect, asio, wasapi, exclusive...
Hi,
I have a stereo only installation, and I'm looking for the best audio quality in both music and videos (I have a lot of...
Hi,
I have a stereo only installation, and I'm looking for the best audio quality in both music and videos (I have a lot of...
Try going into MP config\music\music extensions and try removing .mp4, does this change things.
After that really think the MX4 is way underpowered both graphically and in its memory to create a gui and play a h.264 file, even if it is SD.
Sorry
Try going into MP config\music\music extensions and try removing .mp4, does this change things.
After that really think the MX4...
Hi there,
I am running MP 1.1.2, Win XP, SAF 4.0 and I have upgraded Media Player Classic the 1.6.1.
My issue is that I can run...
do you mean with "horrible reception" a bad picture quality?
do you mean with "horrible reception" a bad picture quality?
Hello everyone! I'm new to the Media Portal forums so please forgive me for being a "Noob" :(
I've had Media Portal for a while...
The recent versions of LAV video decoder support DXVA, so that's another alternative to FFDShow DXVA.
If you press shift+1 (!) on the keyboard when video is playing it will display the render stats screen - it can't tell you if DXVA is in use, but it does list the codecs in use so you can check if they are what you expect....
Tony
The recent versions of LAV video decoder support DXVA, so that's another alternative to FFDShow DXVA.
If you press shift+1 (!) on...
In the past I used ffdshow DXVA and could get hardware acceleration when playing MPEG4 avi files, but recently I installed...
Sorry if i revive such an old thread but it seems the right place for my issue...
I have a HD4600 (core i5 4th gen) latest driver from intel website on Windows 10, if i enable IQS in LAV video decoder this introduce a big instability in my whole setup. I end up with mediaportal freezing when going back from fullscreen video to the...
Sorry if i revive such an old thread but it seems the right place for my issue...
I have a HD4600 (core i5 4th gen) latest driver...
Since I changed a client from NVIDIA to Intel HD graphics 3000 I'm looking for the best codec to replace LAV CUVID I was using...
I have install SAF v6 but still no joy :( in MPC-HC 1080p works just fine ...
I have install SAF v6 but still no joy :( in MPC-HC 1080p works just fine ...
I have this annoying problem with video encoded with h.264 vc-1. During playback all the video is flickring, I don't know if this...
Well. I got it all sorted out. I uninstalled MP and reinstalled it. All is well now. Thanks for the tips. Wish I knew what happened though.
Well. I got it all sorted out. I uninstalled MP and reinstalled it. All is well now. Thanks for the tips. Wish I knew what happened...
I was having a problem where movies (played from a share drive over my LAN) would stop playing and return me back to the summary...
- Locked
thread closed for obvious reasons. Please move to private conversation.
And while where at it: a warning for .de-users not to download that stuff for testing. That TWD-crap is heavily logged.
thread closed for obvious reasons. Please move to private conversation.
And while where at it: a warning for .de-users not to...
apologies if this is in the wrong place.
last few (final 3) episodes of walking dead (series2) cause MP to hang for me. I also...
