Oh well :(
Thanks for the answer.
Oh well :(
Thanks for the answer.
Hi everybody,
With an older version of MP some years ago (can't remember which) I could hear an "accelerated" sound when...
Yes, it is in MP 1.3.0
Tony
Yes, it is in MP 1.3.0
Tony
Hi,
because of many problems with MediaPortal 1.3.0, I switched back to 1.2.3.
I made a clean installation. I also installed...
Yes, had installed everything as it should.
I have a beamer installed on my AV receiver and the device was switched off. So I worked with my touch creen monitor.
As you mentioned the audio drivers I switched on the breamer and checked if the HDMI output was set as standart audio output which was not the case, I think.
Now everything...
Yes, had installed everything as it should.
I have a beamer installed on my AV receiver and the device was switched off. So I...
Hello there!
I encounter serious problems installing MP 1.2.3 on my new computer.
A few months ago everything worked just fine on...
Hi all,
I know that some fantastic work has been done around MP 1.3 with Blu-ray menus etc.
However, I am a big fan of DVDFab and use a number of their products which always seem really cutting edge e.g. 3D Blu Ray ripper etc.
They have released a Blu Ray media player with full navigation that looks to be very good and...
Hi all,
I know that some fantastic work has been done around MP 1.3 with Blu-ray menus etc.
However, I am a big fan of DVDFab...
Hi all,
I know that some fantastic work has been done around MP 1.3 with Blu-ray menus etc.
However, I am a big fan of DVDFab...
re-installed MediaPortal and now working fine
re-installed MediaPortal and now working fine
Hello,
I have a Ati 5750 and im trying to bitstream the HD codecs. I have a m2ts with a DTS-MA stream.
I installed the latest...
Sorry, back again, on the the attached image which is the correct settings for my setup, as per initial post?
thanksalso, I am having trouble understanding the renderers. see attached image, the only on which works on the LG is the mediaportal renderer except thast if I set it to LG-TV(0) Nvidia High Definirtion then it will produce...
Sorry, back again, on the the attached image which is the correct settings for my setup, as per initial post?
thanksalso, I am...
Please can someone advise me on the best audio setup for my particular installation.
Computer > HDMI > TV > Optical Link > Dolby...
If the RealTek is windows "default" for audio, then just leave the setting at "default directsound device".
You do not gain anything by changing this ;)
If the RealTek is windows "default" for audio, then just leave the setting at "default directsound device".
You do not gain...
Hi all,
in the MP client config, the HDMI device appears twice:
"DirectShow:Realtek HDMI"
and
"Realtek HDMI"
Now which to...
+ you have to install ffdshow x86 else you can not select it as MediaPortal is 32bit.
+ you have to install ffdshow x86 else you can not select it as MediaPortal is 32bit.
Just trying to get the lip sync absolutely spot on, using 1.3 with LAV and MP Audio Codecs, but is there any way to dynamically...
It doesn't like the aac audio on NZ freeview. If you deselect any aac channels leaving only ac3 it should work.
If you want to trim the video you can try Avidemux 2.6 (use 32 bit version as it doesn't crash on exit), it is free and open source. Select ts or mkv as output format and deselect the aac tracks in the audio menu. Copying...
It doesn't like the aac audio on NZ freeview. If you deselect any aac channels leaving only ac3 it should work.
If you want to...
Wanting to get a few files off the HDD and give others to a friend. Here in New Zealand, we've got Mpeg-4 (h264 and AC3/AAC)...
This is a option if I will have much time in the future. I must make all the wires longer to connect outside the board to the onboardplugs.
Now the PC is running well with the divX codec ...
This is a option if I will have much time in the future. I must make all the wires longer to connect outside the board to the...
Hello,
I have the problem that MePo don't plays recordet HD satellite recordings.
See also...
after some time I finally came to test Haali on my HTPC and it works fine now. Thanks!
after some time I finally came to test Haali on my HTPC and it works fine now. Thanks!
Hey guys!
Everytime I watch a movie and i want to change the audio stream the video playback stops and can't be continued unless...
I cannot figure out how to configure audio codecs for music files.
Codecs are selectable and configurable for TV and video, but no similar setup exist for Music.
Any hints or solutions ?
I cannot figure out how to configure audio codecs for music files.
Codecs are selectable and configurable for TV and video, but no...
I cannot figure out how to configure audio codecs for music files.
Codecs are selectable and configurable for TV and video, but no...
I just Shark007 on all systems - only sucks for upgrading as you need to do an uninstall/reinstall. And there I use what works best for me (in my case: MPC/ffdshow).
I just Shark007 on all systems - only sucks for upgrading as you need to do an uninstall/reinstall. And there I use what works best...
I was thinking that MP would note what the recommend codecs or packs would be for a fresh installation... but unfortunately I could...
this has improved it massively!!! but.... there are still the odd glitch here and there. think its due to the nVidia graphics card.... might look for a ati suitable
this has improved it massively!!! but.... there are still the odd glitch here and there. think its due to the nVidia graphics...
Hello, im having a problem and its litterally making me pull my hair out! i have a multiroom setup and i just cant get live HD tv...
Codecs
Codecs
hi folks,
mkv hd files are playing without video, only audio.
I have a HD bitstream intel motherboard with dts-hd support.
This...
I have a dual monitor setup. My primary monitor is for my pc and the secondary monitor is my TV that I have Mediaportal defaulted to start up on. When I use Arcsoft TotalMedia Theater 5 as my external player to play bluray movies through Moving Pictures it loads TMT5 just fine but its on the primary monitor. I'd like to default it to...
I have a dual monitor setup. My primary monitor is for my pc and the secondary monitor is my TV that I have Mediaportal defaulted...
I have a dual monitor setup. My primary monitor is for my pc and the secondary monitor is my TV that I have Mediaportal defaulted...
Okay,thanks.
Okay,thanks.
Hello,
I'm new to MP and let me say that its a great media center software, i tested a lot of software and this is my choice, i...
Just been thru this. Most amps cant decode 5.1 pcm (aac) so will output only 2 channel.
I am using LAV. Had to untick acc in the LAV audio. Installed ffdshow for audio and enabled only aac. Now set ffdshow to covert aac to ac3.
Go into MP Config and set aac to use ffdshow. Now aac will be sent thru to your amp as 5.1 ac3 which it can...
Just been thru this. Most amps cant decode 5.1 pcm (aac) so will output only 2 channel.
I am using LAV. Had to untick acc in the...
Hi People,
I am currently running mpv: 1.2.3 with powerdvd12 codecs registered and used.
I have passthrough on all audio, dts...
I recently upgraded to MP 1.2.3 from MP 1.1.3 due to outdated plugins and now have an issue with my Online video setup.
The video play back streams ok from the net and buffers well ahead by it is choppy and stagnates in playback. I have tried the LAV filters and the ffdshow filters without success. I can playback television...
I recently upgraded to MP 1.2.3 from MP 1.1.3 due to outdated plugins and now have an issue with my Online video setup.
The video...
I recently upgraded to MP 1.2.3 from MP 1.1.3 due to outdated plugins and now have an issue with my Online video setup.
The video...
I tried it right now.
When i unchecked "Autocreate thumbs" the movies became unwatchable. I can hear the sound but the image freeze.
When i changed it back it made things better but video is still unwatchable.
I tried it right now.
When i unchecked "Autocreate thumbs" the movies became unwatchable. I can hear the sound but the image...
Hi,
In the past few days I tried to make my videos played smootly with dynamic refresh rate.
I was unsuccesful until today.
I...
TMT 5.x.
1. Ensure you are opening uMCEPlayer5.exe from MediaPortal and not uTotalMediaTheatre5.exe
2. When you click 'Stop' on your MCE remote then uMCEPlayer should close automatically and take you back to MediaPortal. If not then try clicking 'Back' on the remote.
The above works fine for me with MP 1.2.3, Streamed MP and TMT 5.3...
TMT 5.x.
1. Ensure you are opening uMCEPlayer5.exe from MediaPortal and not uTotalMediaTheatre5.exe
2. When you click 'Stop' on...
i am wondering how do i exit powerdvd/totalmedia player when i finish watch 3d bluray. i need to use the MCE remotei control and...
SUCCESS! Thank you so much! Switching to LAV for the video decoders did the trick. I am now smoothly running at ~24frames for all the videos I tried.
As a rule, is this the decoder configuration I should have been using from the start? I was initially setting up using this guide on the wiki, and it instructed to use the MS ones for...
SUCCESS! Thank you so much! Switching to LAV for the video decoders did the trick. I am now smoothly running at ~24frames for all...
Hey all,
I'm totally new to MP, but I've got a bizarre playback issue going on that I'll try to explain -- hopefully someone out...
Have you checked that the extension on the file are supported (if are same as other files, then ignore below:-?
MediaPortal Config, within the Video's section, click on video extension, and add extension for files not playing if it's not in list.
TTFN - JCMP
Have you checked that the extension on the file are supported (if are same as other files, then ignore below:-?
MediaPortal...
Guys,
I have Mediaportal 1.2.3 on Windows 7 64-bit with Sp1 and all p0atches as of 2 weeks ago.
I have downloaded a movie pack...
I got it working thanks.
I got it working thanks.
I can't seem to get MPC working as an external player. I put (paste) its location in the external player dialog box, and use...
LOL, thanks for helping an almost blind user. "LAV Video Decoder" and "LAV Audio Decoder" looked very similar together, and the tab was called "Video Codecs" only which helped making them even more similar.
LOL, thanks for helping an almost blind user. "LAV Video Decoder" and "LAV Audio Decoder" looked very similar together, and the tab...
I'm probably missing something basic, but are we supposed to be able to use LAV filters as a codec in MediaPortal? I installed LAV...
I have been using MP for well over 5 years. Only recently after I got the Unlock for SAF have I experienced a truly stable system. No more Codec issues. God knows how many weekend I spent tinkering with the settings.
Well worth a message to Hoborg. :)
I have been using MP for well over 5 years. Only recently after I got the Unlock for SAF have I experienced a truly stable system...
Hi, I'm reading about SAF codec pack (LAV) and something about unlocking SAF. I'm not clear what this unlocking means... What is...
His receiver support different HD sound formats, spdif doesent support hd sound. So when playing mkv with dts/dd hd sound formats he only will get good plain old dts or dd...
ffdshow is good, but i feel that i getting better picture quality using lavfilters.
His receiver support different HD sound formats, spdif doesent support hd sound. So when playing mkv with dts/dd hd sound formats...
I have MP 1.2.3, with StreamedMP (1.7.7.3113), running on Win 7 x64 SP1 (fully patched etc).
Codec wise, I have only installed...
That works! Thank you.
That works! Thank you.
EDIT: ced007 found a solution: https://forum.team-mediaportal.com/threads/lav-and-subtitles.108773/#post-875564
I struggle to set...
I had installed saf but had not enabled hardware acceleration... things run a lot smoother now. Thanks anyway.
I had installed saf but had not enabled hardware acceleration... things run a lot smoother now. Thanks anyway.
I've MP setup with 4therecord for watching live tv. Occasionally I experience some stutter. The image and sounf freezes for an...
Been a while since last posting.
I've been converting my DVD library to mkv to save room on my server. Since converting I'm finding out that the mkv's are crashing one of my media machines running MediaPortal 1.2.2 using the SAF6 codecs. I do have other codecs on the computer while I was experimenting.
Now I have two other...
Been a while since last posting.
I've been converting my DVD library to mkv to save room on my server. Since converting I'm...
Been a while since last posting.
I've been converting my DVD library to mkv to save room on my server. Since converting I'm...