Post problems you have when using MediaPortal,
or pre installation questions in here.
If you use this installer, it should be ok :)
https://forum.team-mediaportal.com/threads/bluray-external-player-pdvd14-not-working.134609/page-2#post-1188606
If you use this installer, it should be ok :)...
Hello,
i just update MP1.12 to MP1.15Pre
on the MP1.12, in the moving picture plugin i define external player for BD :
player...
Many thanks for the detailed analysis - it is largely correct and it does seem that if something is playing then the unit will turn back on.
I have just checked and if I specifically switch the TV off before powering down while a recording is in progress then it will indeed turn off and stay off (or at least stay in away mode). And...
Many thanks for the detailed analysis - it is largely correct and it does seem that if something is playing then the unit will turn...
I have Mediaportal 1 front end with Argus TV as the TV server.
If I configure a timed recording all works fine. The media centre...
Yes, that could be the reason.
Great. :)
Yes, that could be the reason.
Great. :)
I use a USB-HDMI2 USB 2.0 display adapter (DisplayLink) for my projector. When starting MP I get blank screen.
If I attach a...
Thanks mm
I upgraded to MP 1.5PR and all seems fine(y)
Thanks mm
I upgraded to MP 1.5PR and all seems fine(y)
Hi guys
Every time I try to scan my music folder to add more music it crashes:(
The only changes to my system would be windows...
Hello and welcome :)
If I recall correctly, the resolution was to:
Open HDHR Setup.
Go to the "advanced" tab.
Click "repair" to repair/reinstall Windows components.
If that doesn't help, please start a new thread with full details of your problem and don't forget to supply log files.
Hello and welcome :)
If I recall correctly, the resolution was to:
Open HDHR Setup.
Go to the "advanced" tab.
Click "repair" to...
I'm trying to get the MP TV-Server to scan my HDHomerun but I'm not having any success.
The HdhomeRun is listed as a server in the...
Nope. The instructions in the first post of that thread are still correct for MP1.14 as of today.
Nope. The instructions in the first post of that thread are still correct for MP1.14 as of today.
I have MP1.14 running properly as a backend for Kodi 16 with the 3 tuner HDHR prime.
Win7 64, 8Mb memory, 120Gb flash drive for...
Thanks very much.
Thanks very much.
Hi
I'm using My Videos to store one off programmes that are not in a TV series and are not a movie. They are stored as...
Yep, it's certainly possible (from your description: overwhelmingly likely) that the database corruption was only one part of the problem. Anyhow, I'm glad you're back up and running. :)
Yep, it's certainly possible (from your description: overwhelmingly likely) that the database corruption was only one part of the...
So... a few weeks ago I started fresh with a clean install of Win10 and Mediaportal on a new ssd drive. I have been slowly moving...
Hi,
Is there anyway to watch Sling TV through MP? I hate to close MP and switch from remote to keyboard everytime I want to use Sling.
Hi,
Is there anyway to watch Sling TV through MP? I hate to close MP and switch from remote to keyboard everytime I want to use Sling.
Hi,
Is there anyway to watch Sling TV through MP? I hate to close MP and switch from remote to keyboard everytime I want to use Sling.
Bump? Does anyone have time to have a quick look at the logs possibly, and give me a clue on what might be the problem? Thanks.
Bump? Does anyone have time to have a quick look at the logs possibly, and give me a clue on what might be the problem? Thanks.
Hello,
I have MediaPortal 1.12 on a client, I have updated all the MPEI extensions and I am getting a crash when watching trailers...
Ahhh, okay. Thanks for reporting the solution. (y)
Ahhh, okay. Thanks for reporting the solution. (y)
Hello everyone,
I am running MP 1.13 and while this has been going on for a long time, though that I would seek some help about...
Small update!
Seems that somehow my htpc was set to 23hz(somehow, kids perhaps?). Anyway, after setting it to 60hz again things have sped up somewhat. Not perfect, but tolerable at least ☺️
Small update!
Seems that somehow my htpc was set to 23hz(somehow, kids perhaps?). Anyway, after setting it to 60hz again things...
Hey,
So, since a couple of weeks at least, MP is becoming slower and slower. Takes quite a long time to start and navigation...
Hi again
When you scan an M3U, each URL is "tuned" in order to determine the details of the available channels. Note I said channels. It's important to keep in mind that TV Server does not assume one channel per URL (ie. single program transport stream).
Even if the stream from each URL does only contain a single channel, TV Server...
Hi again
When you scan an M3U, each URL is "tuned" in order to determine the details of the available channels. Note I said...
Hi,
I've recently got a subscription to an IPTV provider and I am now trying to add 600 channels in TV-server.
Is there a way to...
Snif, no way.... I close this thread :/
Snif, no way.... I close this thread :/
Hi all!
Someone can say me how to add or modify cards features in MP 1.14 ?
I want to add FM radio feature to S801 (DiBcom DBA)...
Thanks a lot, this is the problem, i solve this, thanks.
Thanks a lot, this is the problem, i solve this, thanks.
Hello, first sorry for my english.
I try to be clear, when i try to launch MP it´s start ok, but when i move to any part of the...
Just upgraded to Windows 10 and now have a problem with the text size - using StreamedMP
Initially Windows set the screen size to 150% and the text in MP was too small, I set the text size to 100% and it was fine til I rebooted then the text was massive.
If I then set the text size back to 150% the text in MP is fine again, til I...
Just upgraded to Windows 10 and now have a problem with the text size - using StreamedMP
Initially Windows set the screen size to...
Just upgraded to Windows 10 and now have a problem with the text size - using StreamedMP
Initially Windows set the screen size to...
Sometimes after switching to another channel I get only a black screen and the GUI is frozen.
No key (ESC, Back, Remote Back, Remote Stop, ..) does work anymore.
I have to "kill" MP via Task Manager and the WatchDog restarts MP and it works again.
Can anybody check the logs?
I didn't find any error.
Sometimes after switching to another channel I get only a black screen and the GUI is frozen.
No key (ESC, Back, Remote Back...
Sometimes after switching to another channel I get only a black screen and the GUI is frozen.
No key (ESC, Back, Remote Back...
Thanks!
I'm guessing it may have been some conflict with another tuner software (nextpvr), perhaps I did not properly kill its process. Now it seems fine... Even with mediaportal audio renderer set. Still am in the process of configuring it nicely, so I'm not using it fully. :)
Thanks!
I'm guessing it may have been some conflict with another tuner software (nextpvr), perhaps I did not properly kill its...
Hi,
I had some issues last night although I'm not sure if it's a MP problem or a tuner problem. I have been having similar...
Thanks guys your help is very much appreciated
Thanks guys your help is very much appreciated
Every time I see a new release I consider upgrading but always give up because I would like to review any instructions or tips...
I think the answer depends who you ask and what content and setup they have. When it works, in theory it does produce better results than a regular DirectSound renderer. The problem is that there are some situations when it doesn't work. Most often I've seen reports of trouble with TV, but I suppose there are sure to be other...
I think the answer depends who you ask and what content and setup they have. When it works, in theory it does produce better...
Hello,
recently I formatted my HTPC and I decided to pass from Windows 8.1 (where I used MP 1.3 version) to Windows 7 pro as...
Thanks for the pointer to the config file
Yes I agree about the hard reset except as I try to fix the issues from my recent thread "PC Crashes While Recording" I don't have much option as Ctrl+Alt+Del won't work.
The only issues I have had (only twice) when doing a hard reset have been with the above mentioned config files so at...
Thanks for the pointer to the config file
Yes I agree about the hard reset except as I try to fix the issues from my recent thread...
I have just had an issue where my Mediaportal.exe.config file became corrupt after a hard reset. I have fixed it by copying the...
Well, the logs that you provided show the path to be active in MovingPictures - see my posting #13 above.
It's not.
Power-up of drives may take some time, however, this should only lead to a delay in responding - not an error message. therefore I believe that the issue lies in a combination of your hardware setup and MovingPictures...
Well, the logs that you provided show the path to be active in MovingPictures - see my posting #13 above.
It's not.
Power-up of...
Hello everyone!
So after many months of procrastination I finally got around to updating from Windows 7 to 10, after fixing...
I have not reassigned only three buttons, for some reason they always return the following pressing (in the picture).
You can then decide how it is? Do not know?
EDIT: It seems that these buttons are always submerged like this:
CTRL+G, CTRL+D or CTRL+T, CTRL+SHIFT+M ie MCE Guide, Details, DVD Menu ...
I have not reassigned only three buttons, for some reason they always return the following pressing (in the picture).
You can then...
Hi guys,
I'm evaluating the following MCE IR solution:
http://www.hd-plex.com/hdplex-internal-mce-ir-remote-control.html
I've...
I have the Problem with Computer not going to sleep after Streaming to Clients. Srvnet prevents the machine from sleeping. After Reboot it works again. I tried the
powercfg /requestsoverride DRIVER srvnet System
But it didn't have Effect. What can I do? Is there an option in Power Scheduler Plugin? Windows 8.1, Medial Portal 1.14...
I have the Problem with Computer not going to sleep after Streaming to Clients. Srvnet prevents the machine from sleeping. After...
I have the Problem with Computer not going to sleep after Streaming to Clients. Srvnet prevents the machine from sleeping. After...
I'll probably need to wait till 3D Blu-ray playback support is added (internal or via external player) but it's good news it's in the works. I can use the MPSync method suggested by mm above in the meantime and continue using MP1.
You're right about the remote control. The one with hauppauge isn't necessarily trash, I've been using...
I'll probably need to wait till 3D Blu-ray playback support is added (internal or via external player) but it's good news it's in...
For over 6 years now I've been using MediaPortal on our main HTPC in the home theater.
Towards the end of this month, I'm...
Ok I have set the MP TV audio renderer to DirectSound and also ran the dxdiag which says all is ok so let's see what happens
Ok I have set the MP TV audio renderer to DirectSound and also ran the dxdiag which says all is ok so let's see what happens
I have had MP.1.14.0 stop running as follows:
1. Watching a channel then change channel by using remote generated channel id...
Great! :)
I'm happy to have been able to assist.
Great! :)
I'm happy to have been able to assist.
Hi, I had a power cut whilst the PC was on and since then I've been having a problem tuning into my DVB-S2 tuner channels (DVB-T2...
Ok my apologies to all, I have just found the built in tray launchermany thanks Stephane, for you quick help. Sorted :-)
Ok my apologies to all, I have just found the built in tray launchermany thanks Stephane, for you quick help. Sorted :-)
Can some one please help, I am looking for Mediaportal tray launcher by Solykz but when I try to download it from extension manager...
I have updated to the official 1.14.0 version, will see how I get on with that, thank you.
I have updated to the official 1.14.0 version, will see how I get on with that, thank you.
Whether it be Movies or TV Series, if it has been paused for a while MP hangs and won't respond and I have to End Process via Task...
The encoder package is at the moment available on
tingy.pw
if anyone is still looking for it.
The encoder package is at the moment available on
tingy.pw
if anyone is still looking for it.
I extracted/modified the MainConcept (Hauppauge) MPEG2-Encoder Files for the use with ALL Software-Encoder based cards (ALL Brands...