Post problems you have when using MediaPortal,
or pre installation questions in here.
Thanks - the above is what I needed.
Thanks - the above is what I needed.
I am running MP1 version 1.13.0.0
I have Synology NAS DS-411J with a dedicated Share set up for recording.
On my Windows 10 PC I am...
I think it is. Sorry I can't be 100% sure :unsure:as I'm using a madvr test version, but that is based on 1.14 final and the problem reported here is fixed in that.
I think it is. Sorry I can't be 100% sure :unsure:as I'm using a madvr test version, but that is based on 1.14 final and the...
If I schedule a recording then put the HTPC to sleep it will wake up on schedule and start the recording with MP displayed but in a...
And sorry for not being able to respond before now...
But good to hear that it worked for you.
And what i did was Scanning
- Global
- DVBC Symbolrate 6875
And sorry for not being able to respond before now...
But good to hear that it worked for you.
And what i did was Scanning
-...
Hi
I can not find all my channels using YouSee global (Danmark)
I can not Find any where to enter my netværks ID so I tried to...
Thanks. I'll give one of those two choices a try.
Thanks. I'll give one of those two choices a try.
I've recorded shows for months without issue. I updated my TV Schedule daily.
My last three records have only lasted a minute...
I had the same Problem, cut GUI sounds over HDMI bitstream, on Windows 8 and 10 (no Problem with win7). see this
keine GUI Sounds über HDMI
The solution was the AVR Audio guard in my case too.
Edit: I did not realize till now thar AVRGuard can cause significant CPU load (30-70% on my rig). I switched to SoundSwitch_v2 at the moment...
I had the same Problem, cut GUI sounds over HDMI bitstream, on Windows 8 and 10 (no Problem with win7). see this
keine GUI Sounds...
Hi,
don"t think it is related to this release, but maybe I'm overseeing something.
I have no navigation sounds in the Mediaportal...
That was it. My speakers were unplugged at the PC end while I was installing the new card so sound was switched off line - no audio output.
Thanks so much to both of you for quick and spot on replies
That was it. My speakers were unplugged at the PC end while I was installing the new card so sound was switched off line - no...
Hi All,
I have Media Portal 1.13.0 Final on Win10.
Client and server are both on same PC.
I upgraded video card from NVidia...
No, I am just teasing you. Having a laff with you not at you :) no worries it happens all the time, specially if you use a phones autocorrect.
No, I am just teasing you. Having a laff with you not at you :) no worries it happens all the time, specially if you use a phones...
I have a new HTPC I built two days ago. i5-6500 with an GA-170X-Gaming 7 (the motherboard supports HDMI 2.0) and 16 GB of DDR4. It...
Thanks MM1352000,
That's exactly what the problem was. I am now enjoying videos through my Media Portal. I don't remember disabling it, but I must have somehow. Its obvious when I think about it now.
Your help much appreciated. I owe you a beer (whatever your favourite beverage) :)
Thanks MM1352000,
That's exactly what the problem was. I am now enjoying videos through my Media Portal. I don't remember...
I am having an issue with MP 1.13 final release, where for some reason selecting "Videos" from the home page just flashes up...
Sorry for the lack of reply I got busy;
I think this may have been just a coincidental issue when I tested it some more. My Ceton tuner didn't get paired right so that explains that portion, and my HDHR I think is an issue with rebooting it and the service which caused some issues. I am going to try to get it cleared up this...
Sorry for the lack of reply I got busy;
I think this may have been just a coincidental issue when I tested it some more. My Ceton...
Hello,
I had been using a Ceton Eth6 tuner for some time and wanted to try the HD homerun prime and switched over a few months...
Ahhhh, that's really unfortunate. Perhaps more caution would be appropriate in future.
If this is genuinely a GPU driver issue (which seems very likely, given the circumstances) then there's not much we can do about it. In that case you'd have to find some way to make it possible to roll back (eg. temporarily free up space on your...
Ahhhh, that's really unfortunate. Perhaps more caution would be appropriate in future.
If this is genuinely a GPU driver issue...
Updated AMD catalyst to non-whql-64bit-radeon-software-crimson-16.4.1-win10-win8.1-win7-apr4
Now, MP Client freezes whenever I go...
In the words of Homer Simpson, "D'oh!" Anyway, that did the trick. Thanks so much for assistance...and patience.
P
In the words of Homer Simpson, "D'oh!" Anyway, that did the trick. Thanks so much for assistance...and patience.
P
Hi:
My client can't find the server. When I look at Windows services, the TV service isn't started. When I try to start the TV...
Hi and sorry for coming back so late.
Menawhile I played much around with the card but did not found the real issue "in software".
Finaly it happend Win10 is changing it's system ID due to some changes of me - I lost my activation and was unable to redo it.
For me it was not clear till that date, that it is not possible to simply...
Hi and sorry for coming back so late.
Menawhile I played much around with the card but did not found the real issue "in software"...
Hi all,
after having problems grabbing the right channels from DVB-S2@Astra (don't know really what happened, but I always have...
Yes, that's the intended behaviour/function for that setting. It's not intended to affect all dates.
Yes, that's the intended behaviour/function for that setting. It's not intended to affect all dates.
The date shown for tv recordings does not include the year, even though the year has been included in the 'date format' in the...
This is the thread that I was thinking about:
https://forum.team-mediaportal.com/threads/add-mce-recording-support-to-mp2-wtv-dvr-ms.131082/
It seems that the support for extracting the metadata from WTV files was added only to MP2, and not to MP1. :(
-- from CyberSimian in the UK
This is the thread that I was thinking about...
Newby here - just installed Media Portal 1 and I get a solid Black screen when I run it :(
This, after installing MP2 and not being...
Thanks a lot for your answer and pointing out the other threads related to this issue.
I will try to find a new version of the drivers first...as a second chance, to stop the mentioned service and see if this will imply some side-effects...
Thanks!
Thanks a lot for your answer and pointing out the other threads related to this issue.
I will try to find a new version of the...
Hi guys,
Yesterday I was setting up the TV Server for the first time. No issues in initially detecting my dual TV tuner PCI card...
Tried with a custom LAV build from @Sebastiii (0.68.5 git) and got a bit further :)
- Works with MPC-HC (no image corruption) as subtitle engine however no subtitle selection for that sample
- With DirectVobSub I get the subtitle selection however also the image corruption back
So while not perfect at least I can have MPC-HC for...
Tried with a custom LAV build from @Sebastiii (0.68.5 git) and got a bit further :)
- Works with MPC-HC (no image corruption) as...
Hi,
Been trying out some 2160P releases recently and came across an odd issue with HEVC playback, it will run at a reduced...
You could try disable HID to rule it out but that should not be the issue.
You could try disable HID to rule it out but that should not be the issue.
Hello,
I'm using mediaportal on a 4k non primary monitor with hdmi 2.0 cables, and if I run mediaportal at 60hz it crashes after...
Thank you again for having a look into my log files.
I do really think this is a Windows 10 issues because with Windows 8.1 there was not a problem.
So is it possible to disable that away mode at all? So that MediaPortal will be active even the monitor is switched of...
Thank you again for having a look into my log files.
I do really think this is a Windows 10 issues because with Windows 8.1 there...
I have searched and haven't seen others with this issue. I though it was the skin, but I changed that and it still happens...
Ahhhh, I was wondering if you deleted channels. That explains the source of the issue, however...
...you shouldn't have to do this. When you delete channels, the associated schedules should also be deleted.
Great! :)
Ahhhh, I was wondering if you deleted channels. That explains the source of the issue, however...
...you shouldn't have to do...
Hi All.
I have been using MePo for many years (0.12 i think?) and have found that most of the recent releases have been great...
Hi, I recently changed the default record tv folder folder from /public/public recorder tv to f:/recorded tv
In the process of changing over the folder, the database still thinks there are 4 episodes of Eastenders in the old folder and these are showing in recorded tv, but MP wont let me delete the episodes. There are no episodes of...
Hi, I recently changed the default record tv folder folder from /public/public recorder tv to f:/recorded tv
In the process of...
Hi, I recently changed the default record tv folder folder from /public/public recorder tv to f:/recorded tv
In the process of...
Update:
Upgrading the OS did not solve the problem. I got a new internal HD and reinstalled everything onto it. After that, no more problems.
I guess the lesson is, take the SMART diagnostics for HDDs with some skepticism.
Thanks for your assistance.
Update:
Upgrading the OS did not solve the problem. I got a new internal HD and reinstalled everything onto it. After that, no more...
Hi:
This error just started the other day. When I tried to watch a recorded multi-hour sporting event, the program just hung...
mm1352000,
Thanks for a very thorough explanation! I will make the changes to the TV Server and hopefully get out of the doghouse with my wife.
mm1352000,
Thanks for a very thorough explanation! I will make the changes to the TV Server and hopefully get out of the doghouse...
I'm a new user of the forums, so I apologize if I've left something out that I should be including. However, I am not new to MP as...
A lot of the prime time shows on Sky 1, Atlantic and Living have missing descriptions through DJBlu's grabber, but the repeats have them. EPG Collector is able to get the the full descriptions so something has probably changed since DJBlu stopped working on it.
DC's Legends of Tomorrow is prefixed with 'New:' on the first showing so...
A lot of the prime time shows on Sky 1, Atlantic and Living have missing descriptions through DJBlu's grabber, but the repeats have...
Hi,
I am currently having a problem with series record. I am looking to record 'DC's Legends of Tomorrow' at 8pm on Thursday this...
Upgraded earlier today and this far it seems to work like supposed. Thanks!
Upgraded earlier today and this far it seems to work like supposed. Thanks!
Hi, I don't think this is really a pure problem of MusicInfoHandler. My logs suddenly got started to be spammed (see...
Okay. I'll await the new log files.
Do you think it's possible that the cause of the system freeze is the same as the cause of the problems with MediaPortal?
Okay. I'll await the new log files.
Do you think it's possible that the cause of the system freeze is the same as the cause of the...
Hi guys,
A couple of days ago I started having problems with Media Portal acting very sluggishly, ultimately resulting in it...
MP1
MP2
Various problems since upgrade to 1.13 (Sluggish, constant "unable to play" msg, shut offs, etc)
DE
@Brudertac I have checked and no Error, Critical or Warnings in Event Viewer since 2/22 :)
@Brudertac I have checked and no Error, Critical or Warnings in Event Viewer since 2/22 :)
@Sebastiii this post will have the logs I mentioned on IRC
Okay, first off this HTPC (main HTPC) is about 3 years old and has not...
I've seen that the 1.14pre seems to have this patch as well so I installed the 1.14.
Seems to work so far.
Thank you. (y)
I've seen that the 1.14pre seems to have this patch as well so I installed the 1.14.
Seems to work so far.
Thank you. (y)
I encountered a problem on my bedroom client.
When I have media playing (live tv, youtube..) and want to switch to another screen...
No problem, and thanks for the explanation. :)
Yep, this looks better now. (y)
To be clear: having the tuners paired as a hybrid tuner is/was the right thing to do. I would recommend that you recreate/reconfigure the hybrid group.
Your understanding seems to be incorrect. The purpose of pairing the tuners is to inform TV Server...
No problem, and thanks for the explanation. :)
Yep, this looks better now. (y)
To be clear: having the tuners paired as a hybrid...
After trying to scan for analog channels on an Asus TV Tuner Card (PS3-110), I get the following message upon failure to scan...
I restarted the PC through Mediaportal menu a few day ago, since then it won't start any more.
I already tried to start without plugins to collect logs, without success...
The only thing I get is an XmlException in the EventViewer (see attached).
Any hint to solve the problem would be greatly appreciated
I restarted the PC through Mediaportal menu a few day ago, since then it won't start any more.
I already tried to start without...
I restarted the PC through Mediaportal menu a few day ago, since then it won't start any more.
I already tried to start without...
+1(y) on that, and working on WW Lite 1.7.1.
Also many thanks.:)
+1(y) on that, and working on WW Lite 1.7.1.
Also many thanks.:)
It looks like I'm not getting any data on wind, it is always from the north at 0 speed. It is the same in both World Weather and...