Post problems you have when using MediaPortal,
or pre installation questions in here.
problem solved by reinstalling win7.
problem solved by reinstalling win7.
Hi Folks,
I have a really annoying issue: The GUI (Titan, but also with the default Skin) freezes / hangs for about 5 Seconds...
I didn't notice it on my side but maybe because i'm in full range all along (TV + PC + AVR)
I didn't notice it on my side but maybe because i'm in full range all along (TV + PC + AVR)
I am not sure if this is a new issue but it's something I've certainly noticed recently. When MediaPortal changes the refresh rate...
If you suspect that this problem is caused by resolution changes, it might be worthwhile seeing if you can find the registry setting that defines the default screen size that Windows uses.
I used WMC for five years, and this problem was prevalent among WMC users too (including me!). I vaguely remember a "fix" that involved changing...
If you suspect that this problem is caused by resolution changes, it might be worthwhile seeing if you can find the registry...
Hi there, i can't figure it out, when i put pc into sleep and afterwards wake it win 7 64 resume good only mediaportal is stuck on...
Halleluja,
I solved the problem. It was an fast, easy and completely illogical fix: I installed the drivers for the onboard Realtek HD Audio chip which I do not use for the HTPC.
The problem is, this mainboard is in that respect different to all I ever had. I am building my own PC since 1993 now and I have some experience in...
Halleluja,
I solved the problem. It was an fast, easy and completely illogical fix: I installed the drivers for the onboard...
Hi,
I have set up a new HTPC with Windows 10 and MP 1.13 some days ago (see HTPC 2 in my system specs). I have troubles with audio...
No worries it is fixed.:)
A gremlin had been playing with the bios.:oops:
No worries it is fixed.:)
A gremlin had been playing with the bios.:oops:
No worries it is fixed.:)
A gremlin had been playing with the bios.:oops:
Hi Owlsroost,
Thanks for your tip. I gave it a go but it made no difference. What I did find that seems to have fixed it is by changing the Audio Renderer to MediaPortal Audio Renderer. I can press pause now for 5 seconds or longer and then when I replay it plays fine.
Thanks guys for all your support :)
Hi Owlsroost,
Thanks for your tip. I gave it a go but it made no difference. What I did find that seems to have fixed it is by...
Hi Guys,
I am in desperate need of help here. I have clean install of Win10, latest 1.3 Mediaportal Final. Latest windows updates...
The NVidia driver issue mentioned in this thread is not present in the latest NVidia drivers. Also it was never specific to 1.13. I don't know about that patch.
The NVidia driver issue mentioned in this thread is not present in the latest NVidia drivers. Also it was never specific to 1.13. I...
I have windows 10 and when I updated to Media Portal 1.13.0, I got problem with the display driver (Nvidia). I got the following...
This looks like the fix @Adam86
This looks like the fix @Adam86
If I hit the ESC key while playing a recording in full screen MP 1.13 Final freezes (a few seconds before audio).
Reverting to MP...
@richardc1983
Please start your own thread. I'd prefer to investigate your problem on it's own merit. Same symptoms does not necessarily mean same cause.
Please also fill in your system specifications for your server and all your clients in your forum profile...
@richardc1983
Please start your own thread. I'd prefer to investigate your problem on it's own merit. Same symptoms does not...
I'm running MediaPortal 1.13 with default skin under Windows 10 with a Hauppage DCR-2650 getting digital cable from Comcast. Often...
I've applied the preload setting and left it set to stop card. Thank you very much for your help and hopefully this will resolve the problem, I'm impressed with the help I've received with this and have made a donation to the cause.
I've applied the preload setting and left it set to stop card. Thank you very much for your help and hopefully this will resolve...
We seem to be experiencing problems recording, and I hope somebody can help. I'm extremely short on time, and if I spend too much...
Only for guess: "Comskip should have had plenty of time...", but did you check that really comskip is not running (in task manager the comskip process should not appear)?
Maybe you've already check that and what I say does not make sense, but in my case, with HD programs comskip takes much, much more than with SD programs.
Sometimes...
Only for guess: "Comskip should have had plenty of time...", but did you check that really comskip is not running (in task manager...
I get an error "unable to delete" when I try to delete some recorded TV shows.
I can delete some and with others I get the error.
I...
MP1
MP2
MP Client video streaming hangs for ~10s every 15 min, if MP Server is shortly going into suspend
DE
I attached the cut of the TVService log where it happens at 16:10 o'clock so that you see before and after
I attached the cut of the TVService log where it happens at 16:10 o'clock so that you see before and after
Overview:
My MP Server is configured in the PowerScheduler to go into suspend after 15min idle time. My MP Client which is another...
MP1 was still working just fine for me after Windows 10 update from Windows 7.
MP1 was still working just fine for me after Windows 10 update from Windows 7.
I am currently running MediaPortal 1 on a windows 7 PC. If i run the windows update to move to windows 10, will I need to...
https://forum.team-mediaportal.com/threads/dont-forget-to-include-logs-and-fill-in-system-specs-for-support.118424/
https://forum.team-mediaportal.com/threads/dont-forget-to-include-logs-and-fill-in-system-specs-for-support.118424/
Version 1.13.0 Final
All has been working perfect for months until today.
All of a sudden the onscreen music button doesn't...
MP should present a message in the circumstances you described. If you'd like somebody to help you figure out why you're not getting a message, follow the support procedure and provide log files showing the problem.
https://forum.team-mediaportal.com/threads/dont-forget-to-include-logs-and-fill-in-system-specs-for-support.118424/
MP should present a message in the circumstances you described. If you'd like somebody to help you figure out why you're not...
Using Version 1.13.0 of MediaPortal and a single tuner. When a schedule recording starts on another channel and I am watching...
Welcome to the forum, and thanks for reporting the problem. :)
Your log files show this error:
[2016-02-07 12:33:02,924] [Log ] [MPMain ] [INFO ] - TSReaderPlayer: event:ErrorAbort param1:-2004287480 param2:0 param1:0x88890008 param2:0x0
I haven't seen this error very often before, but when I have seen it it's been related to the...
Welcome to the forum, and thanks for reporting the problem. :)
Your log files show this error:
[2016-02-07 12:33:02,924] [Log ]...
I started using Media Portal V1 about a month ago (V1.13.0) as a replacement for Windows Media Center so that I could move the...
The other day it was not working again and installing a new version of MP fixed it so I'm thinking restarting the TV service did the trick in that case. Hard to tell could have been another issue too.
It's not sleep related for me as I just turn off the PC rather than put it to sleep.
The other day it was not working again and installing a new version of MP fixed it so I'm thinking restarting the TV service did...
Start MP, try to watch a channel, error message pops up. Reboot fixed the problem.
Logs attached.
Tv recordings now in sync..
Now it's only the restart / hibernation issue..
Tv recordings now in sync..
Now it's only the restart / hibernation issue..
I upgraded to windows 10.
After that i experienced issues with some of my movies.
Symptoms where stuttering movies.
No sound.
I...
Thank you Stéphane, I will give that a try tomorrow and let you know the outcome.
Thank you Stéphane, I will give that a try tomorrow and let you know the outcome.
I am having problems with getting MediaPortal to work with a Microsoft remote, (Pictures of which are attached)
The problem is...
Probably they could be plus and minus to remove some confusion :)
Probably they could be plus and minus to remove some confusion :)
Where is the setting that will permit the guide to show a window / time frame of 3 hours?
Currently the guide shows a window...
Mr.Gadget, this thread is almost 10 years old. Best to start a new thread with log files if you have problems. Before doing that, I'd recommend you take a look at this codec setup guide:
https://forum.team-mediaportal.com/threads/guide-perfect-playback-display-calibration.119610/
Mr.Gadget, this thread is almost 10 years old. Best to start a new thread with log files if you have problems. Before doing that...
Please can someone help me with my problem, i can get all the mediaportal working with the menu displaying (blue background). Once...
Ok, i will try to connect both STB's through hdmi.
Thanks for your quick reply!
Ok, i will try to connect both STB's through hdmi.
Thanks for your quick reply!
Hello,
I have a mediaportal setup with 2 colossus cards, connected to 2 set top boxes.
1 is connected via hdmi, the other is...
Hello and welcome Peter
No there's no particular problem with that channel. I suggest you provide log files if you'd like assistance to figure out why you're not able to view the channel.
Please use the Watchdog tool with option 1 ("report a bug to Team MediaPortal") as described in our wiki (manual)...
Hello and welcome Peter
No there's no particular problem with that channel. I suggest you provide log files if you'd like...
I have set up the TV server, scanned successfully, and the channel list includes itv4. however, I cannot watch it, and the channel...
Hello,
I have installed MP13.0 and when I insert a CD in the player (a Pioneer Blu-ray player, model BDR 207 EBK), nothing happens. I tested with and without autoplay options in Windows, and with various Autoplay options in MP ("Ask" and "Play", for audio), leading to the same result.
Strange enough, autoplay in Windows works...
Hello,
I have installed MP13.0 and when I insert a CD in the player (a Pioneer Blu-ray player, model BDR 207 EBK), nothing...
Hello,
I have installed MP13.0 and when I insert a CD in the player (a Pioneer Blu-ray player, model BDR 207 EBK), nothing...
It is still a valid fault finding step to remove modules / drivers to ascertain if they contribute to the issues. In this case it seems not to contribute so I can rule out the realtek drivers causing issues as the problem still occurs with them removed (and more importantly, the audio still functions with what appears to be no audio...
It is still a valid fault finding step to remove modules / drivers to ascertain if they contribute to the issues. In this case it...
I thought I had the perfect reliable MP 1.13 but it appears not.
After a random time while watching live TV the sound/audio will...
Thanks for your patience. Now I have disabled EPG for "EBRU TV", maybe that is the culprit, we will see.
Update: it went to standby and I could wake it up from the client by opening a folder from the htpc. Wow, that seemed too easy. Actually I was not completely convinced that it is solved, but then I checked old logs from last year...
Thanks for your patience. Now I have disabled EPG for "EBRU TV", maybe that is the culprit, we will see.
Update: it went to...
Hi everyone,
after I left windows homegroup (now using linux compatible shares) and installed TVServerKodi-1.12.0.129.mpe1 my HTPC...
Thank you for picking up my post, I wasn’t expecting any reply, my initial post was a thank you, then a post to correct my stupidity in not checking everything before posting.
As @Stéphane Lenclud has suggested I will start a new thread about my problem on the forum.
And then if possible, place a link to it from here.
Thank you for picking up my post, I wasn’t expecting any reply, my initial post was a thank you, then a post to correct my...
I have two remotes available to me. I have one Windows MCE remote and one Hauppauge remote. I cannot get the Hauppauge unit to...
Experiencing a strange issue.
With my MediaPortal 1.13, on my Windows 10 HTPC, I use MovingPictures for movies, and have Cyberlink PowerDVD 15 Ultra setup as the external player for ISO's. This combination works flawlessly - no problems. All my BD & DVD ISO's launch in PowerDVD, remote control works fine & everything works...
Experiencing a strange issue.
With my MediaPortal 1.13, on my Windows 10 HTPC, I use MovingPictures for movies, and have...
Experiencing a strange issue.
With my MediaPortal 1.13, on my Windows 10 HTPC, I use MovingPictures for movies, and have...
Exception: System.ArgumentException: Illegal characters in path.
Check out the path, it seems the pathis a symbol that is not permitted in Windovs.
Exception: System.ArgumentException: Illegal characters in path.
Check out the path, it seems the pathis a symbol that is not...
I have an issue where MediaPortal is crashing on a regular basis. When I run it in debug mode, it seems to work fine, but when I...
You can use your raspberry Pi. Install the OpenELEC and then point it to a share on your server. You don't need to go through MP to listen to the music. Just have your Music in a shared folder and make sure your ID3 info is correct. KODI will import the data and you can use your Cell phone to select your music.
Also through...
You can use your raspberry Pi. Install the OpenELEC and then point it to a share on your server. You don't need to go through...
Hello everybody
Currently my tv is connected via hdmi to my computer (latest ml version), which works great so far. However I...