Post problems you have when using MediaPortal,
or pre installation questions in here.
MP1
MP2
[MP1-4739] ALT-Enter to switch from full to windowed screen stopped working in V1.13.0 Pre
DE
About the diff 1.12.0.0 vs 1.13.0.0, something surely didn't update correctly, you surely need to reinstall 1.13 as upgrade and after you can change the core.dll from the previous post :)
About the diff 1.12.0.0 vs 1.13.0.0, something surely didn't update correctly, you surely need to reinstall 1.13 as upgrade and...
See JIRA issue MP1-4739.
Just updated to V1.13.0 Pre, it appears ALT-Enter doesn't work any more for switching screen modes (full...
Added to Jira :)
Added to Jira :)
@Sebastiii
Why does windowed mode need to be blocked?
Fix your LNB LOF override settings:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/02_TV_Servers/9_Advanced_Tuning_Options/1_DVB-S_Tuning_Details#Override_default_LNB_frequencies
None of them should be blank, even if they're disabled. Set to zero (0) if you don't care.
Fix your LNB LOF override settings...
After scan all channels has the 1000 number and when try to preview any channel a quick "Preview failed:Unknownrerror" appears.
Hello
I will try all regions as advised with the tuner attached to the best outdoor areal. We installed a second one a few years ago not being able to get a signal splitter working reliably and used best quality quad shield coaxial so this should get us back SBS.
Hello
I will try all regions as advised with the tuner attached to the best outdoor areal. We installed a second one a few years...
instilled Media portal 1 and attempted to run a channel scan which crashed my Win 10 PC requiring a hard power restart. The screen...
Shall try that if it happens again, thank you.
Shall try that if it happens again, thank you.
It was working fine last night, only changes today are I installed Apollo (which I uninstalled straight away). Then In installed...
Thank you for the explanation. So, it was a bug before and now it's not. (y)
I'm looking forward to the next release.
Thank you for the explanation. So, it was a bug before and now it's not. (y)
I'm looking forward to the next release.
I've a tiny little issue with subtitles since I updated to Version 1.13. I watch pretty much most of my tv series and movies with...
Borrowing another receiver sounds like a lot of work. It may be easier to just untick the aforementioned setting and hope for the best. A lot of people do that. If it were me that's what I'd do... and only bother investigating further if further/different problems are observed.
Borrowing another receiver sounds like a lot of work. It may be easier to just untick the aforementioned setting and hope for the...
I am experiencing a random issue where every now and then while watching movies playback stops and returns back to previous screen...
I have only set up Moving Pictures to recognise my movie folder (or part of my movies for now until I get to grips with it all), which it recognises and updates without a problem.
MP doesn't have any set folders for any video files, but "MovingPictures" is installed and working fine alongside IMDb+ (although I can't get the IMDb+ to...
I have only set up Moving Pictures to recognise my movie folder (or part of my movies for now until I get to grips with it all)...
I have only set up Moving Pictures to recognise my movie folder (or part of my movies for now until I get to grips with it all)...
For my AC3 stereo to 5.1 upmix needs I just found and setup AC3Filter.
That gives me a nice alternative to SBX Pro Studio.
Let's see if it stands the trial of time :)
For my AC3 stereo to 5.1 upmix needs I just found and setup AC3Filter.
That gives me a nice alternative to SBX Pro Studio.
Let's...
I'm trying to use the PowerDVD codecs for audio but somehow they won't get picked up.
I would like to use them nice stereo to 5.1...
No change. System remains powered.
No change. System remains powered.
Hello,
I have some minor issues with MP1 not entering standby.
Windows itself, with MP stopped, is correctly entering standby as...
Hi Tony,
all the new features of DefaultWideHD and its configuration from inside GUI are explained in detail in this thread:
https://forum.team-mediaportal.com/threads/support-for-new-defaultwidehd.132552/
Hi Tony,
all the new features of DefaultWideHD and its configuration from inside GUI are explained in detail in this thread...
I have just upgraded from 1.12.0 to 1.13.0. Under 1.12.0 I was using the DefaultWide skin (1.4.0.0) and when I was focused on a...
Can you try without TVSeries plugin?
Can you try without TVSeries plugin?
Hi,
from time to time MP1 crashes after standby. I get the MS app not responding message.
Windows Event Log
Anwendung...
I had no TV available when I wrote my reply yesterday, so I could not check the TV's EPG. I checked later and see that all of the CBS channels appear to be 24-hour channels, so the "part-time channel" explanation is not correct. :(
Another possibility that occurs to me is: MUXes. There are currently three DVB-T2 MUXes in the UK...
I had no TV available when I wrote my reply yesterday, so I could not check the TV's EPG. I checked later and see that all of the...
I'm recording from UK Freeview.
I'm running 1.12.0 with four capture cards.
Last week there was a minor channel change that...
I'm also running with 361.43 now and it seems the issue has been fixed.
I'm also running with 361.43 now and it seems the issue has been fixed.
UPDATE: This issue was fixed with NVidia GeForce driver 361.43.
Download the lastest working NVidia GeForce driver 358.50 for MP1...
Yes, that's my setup right now. In the future I'm planning to use the server-pc as a client also to save one client since the server-pc is now located closer to one room (only through a wall).
You're right, if I would have used only a part of my old brain, I should have found out myself. It was the receiving part which wasn't...
Yes, that's my setup right now. In the future I'm planning to use the server-pc as a client also to save one client since the...
Off topic, but: This upgrade made me loose my custom Remote MCE-Mapping. Any easy way to restore from a backup?
Ahhh, that makes sense. :)
Let me know if you have any further problems.
The defaults are to use the codecs which are preferred by the system. In your case those appear to be:
[2015-12-26 11:36:29,859] [Log ] [MPMain ] [INFO ] - Disconnecting all pins from filter MPEG Audio Decoder
...
[2015-12-26 11:36:29,860] [Log ] [MPMain ]...
Ahhh, that makes sense. :)
Let me know if you have any further problems.
The defaults are to use the codecs which are preferred by...
Hi.
I'm using MP1.12 and my TV (DVB-S) randomly stops working. It just switchs to a black screen. In other post I could read that...
Well, english thread is present too https://forum.team-mediaportal.com/threads/new-plugin-myvideoredo-cut-your-recordings-frame-accurate.90053/page-13
Well, english thread is present too...
As VideoRedo appears to be un-supported.....can anyone recommend an alternative editor for .ts type files please!!
So this is a DVDFab issue after all, PGS work just fine when using makemkv for instance.
Here is the new thread about that on the DVDFab forum:
http://forum.dvdfab.cn/showthread.php?p=181177#post181177
They have been sitting on the issue for 2 years now so do not expect it getting fixed anytime soon.
So this is a DVDFab issue after all, PGS work just fine when using makemkv for instance.
Here is the new thread about that on the...
MKV Bluray ripped with DVDFab using PGS subtitles I get a lot of the following issue.
Tried different splitters without joy.
Anyone...
See here for 1.13 Final: https://www.team-mediaportal.com/news/mediaportal-1-13-0-release
See here for 1.13 Final: https://www.team-mediaportal.com/news/mediaportal-1-13-0-release
I tried installing V1.13.0 Pre-release, it bombed out halfway through the installation. I re-ran the installation and it appeared...
I'm happy to have been able to help again. Merry Christmas! :)
I'm happy to have been able to help again. Merry Christmas! :)
Yesterday two of my three tuner cards stopped working - I get a "failed to start graph" error message when trying to watch TV...
It's completely up to you as to whether you're comfortable leaving it. I haven't researched the message at all.
I guess your next choice is deciding whether you'll look at the SQL Server log as suggested, or just reinstall. If the issue is with the database content/structure/integrity then reinstalling without starting a fresh...
It's completely up to you as to whether you're comfortable leaving it. I haven't researched the message at all.
I guess your next...
another never ending recording, the end time of the recording came and went (The Search for Santa Paws) and the recording never...
I got it, everything is working and everything is in order, thank you very much (y)(y)(y)(y)(y)(y):):):):):cry::cry::cry::cry:
I got it, everything is working and everything is in order, thank you very much (y)(y)(y)(y)(y)(y):):):):):cry::cry::cry::cry:
Hello,
Currently im trying to move from mythbuntu to mediaportal with my current ceton infinitv4's and the schedule direct plugin...
System : Media Portal 1 Version 1.12.0, Skin PureVision HD
When playing a video the Wiki states:
V/S (Video Slider) - allows you to select the viewing position in the video, rather than fast forward or rewind, or using the right/left arrow keys to skip
When i try to use the slider it will not move at all. It just updates to the...
System : Media Portal 1 Version 1.12.0, Skin PureVision HD
When playing a video the Wiki states:
V/S (Video Slider) - allows you...
System : Media Portal 1 Version 1.12.0, Skin PureVision HD
When playing a video the Wiki states:
V/S (Video Slider) - allows you...
I mean that I deactivated the DVD plugin. Iso's will still be played. I didn't really look into the extensive lgging details of what is happening. Depending on the context it displays the recordings. But no need to spend time on this, it's just a detail that I will eventually fix in my HID settings.
OK for me. Parsing shouldn't be a...
I mean that I deactivated the DVD plugin. Iso's will still be played. I didn't really look into the extensive lgging details of...
Hi @Stéphane Lenclud ,
I am using a Logitech Smart Control Hub. The hub came with a small remote. Besides standard keys such as...
After removed the setting -> all is working correctly :)
So need to post my config and log :)
After removed the setting -> all is working correctly :)
So need to post my config and log :)
Hi,
I have post in a thread that i have on one of my PC the Volume key send as duplicate from an original MCE remote and i need to...
Thanks ajs :)
@Stéphane Lenclud any news, are you able to test ?
Thanks ajs :)
@Stéphane Lenclud any news, are you able to test ?
Does MP1 support MKVs with multiple video tracks, 2D/3D?
Edit : Added to Jira : https://issues.team-mediaportal.com/browse/MP1-4730
it can do that - there is checkBox "use default refresh rate" that controls this http://wiki.team-mediaportal.com/MediaPortal/Configuration/General/RefreshRate#Options
and you can select default refresh rate as you wish (for 60Hz just select NTSC from the combobox)
it can do that - there is checkBox "use default refresh rate" that controls this...
It looks like I'm dropping frames while watching live TV not matter the video codec.
I tried LAV, Microsoft and CyberLink codecs...
Hi,
Not related to TV but i run into desync too when playing a serie because the video kind of made pause between act1 and 2 (in TV serie we have most 3 or 5 chapters/act, i call it that way).
I'm was running MPAR too but i kept this file because it can be useful for making debugging for either LAV or MPAR or what ever.
If it's LAV...
Hi,
Not related to TV but i run into desync too when playing a serie because the video kind of made pause between act1 and 2 (in...
Sometimes after starting MP the first tuning to a TV channel results in a black screen with only the audio playing.
Switching...
LOL :D
Unfortunately people who use MediaPortal will expect us to support all hardware and software, regardless of how dodgy it is.
Anyhow, there'd be no harm in trying such a rework. :)
LOL :D
Unfortunately people who use MediaPortal will expect us to support all hardware and software, regardless of how dodgy it is...
I've bought a cheap usb remote from china, which comes with some weird buttons.
I tried to find out, how to make certain key...
I just tried to Start MePo and i'm getting some strange errors.
Tried to run the "WatchDogversion" and it's ok so i know it's mostlikely a DB thats is kind of broken..
But wich one..
- Did a restore of all the DB's from the 13th and everyting as good again..
Love a backup that works :)
I just tried to Start MePo and i'm getting some strange errors.
Tried to run the "WatchDogversion" and it's ok so i know it's...
I just tried to Start MePo and i'm getting some strange errors.
Tried to run the "WatchDogversion" and it's ok so i know it's...