Post problems you have when using MediaPortal,
or pre installation questions in here.
Hi
Depending in plug-in, you may be able to log just the plugins you need [MPTVservie & MovingPictures spring to mind] to SSD - to get the level of logging needed to record the GUI events into log and so trigger drive, I think you'll need to set logging to DEBUG level:sick:
Suspect there are better options however(y)
Cheers - JCMP.
Hi
Depending in plug-in, you may be able to log just the plugins you need [MPTVservie & MovingPictures spring to mind] to SSD -...
I recently changed the configuration in my main HTPC, going from a single hard drive setup to an SSD boot drive (MediaPortal...
Many thanks. It is easy when you know how!! I am very grateful for your guidance.
Many thanks. It is easy when you know how!! I am very grateful for your guidance.
I have just reinstalled Media Portal 1.2 and under TV all channels the channels appear in number order. However in the TV Guide...
Hello again Danny
In answer to your questions:
Ensure all your channels are numbered correctly. I mean the channel number field in TV Server Configuration's TV Channels section as shown -->here<--. Note there is a "channel number" column in the main TV Channels section channel list (ie. the first tab) which allows you to quickly...
Hello again Danny
In answer to your questions:
Ensure all your channels are numbered correctly. I mean the channel number field...
Hey folks, I'm new to the world of MediaPortal, so go easy on me! I have tried looking for the info I need, but have come up...
Operating nearby boards RAM maximas (no matter if approaching them per slot or in total) always needs to be well planned, since there are to many configurations possible like how the modules are organised internally and therefore if they are suppoted by the board or not... trying combinations of different modules (no matter if using...
Operating nearby boards RAM maximas (no matter if approaching them per slot or in total) always needs to be well planned, since...
What you are thinking about timeshift on USB stick 3.0 Because the new sticks are very fast. 190mb read 110mb write speed. I want...
I looked at the log and the system appears to resume normally. Nothing to be seen in mediaportal.log, however, the application event log is showing the following:
At 7:34 - relating to BrowseTheWeb
MediaPortal then crashes.You better uninstall BrowseTheWeb
I looked at the log and the system appears to resume normally. Nothing to be seen in mediaportal.log, however, the application...
Mediaportal unusable after resume. MP configuration needs to be run to stop MP after which MP can be restarted.
upgraded from 1.12...
Hi,
I just upgraded my HTPC from Windows 8.1 to Windows 10 (using the Windows upgrade process preserving all data) and moved from MediaPortal 1.10.0 to 1.12.0.
I'm using the Titan Extended skin - occasionally the font size in the UI becomes small. After a reboot everything works again for a few days before it happens again.
Has...
Hi,
I just upgraded my HTPC from Windows 8.1 to Windows 10 (using the Windows upgrade process preserving all data) and moved from...
Hi,
I just upgraded my HTPC from Windows 8.1 to Windows 10 (using the Windows upgrade process preserving all data) and moved from...
Latest Media Handler version is 2.1.0.22
Try install actual Version of LMH - https://forum.team-mediaportal.com/threads/latest-media-handler-v2-3-x-000.132114/
Latest Media Handler version is 2.1.0.22
Try install actual Version of LMH -...
Hi,
I'm running the StreamedMP skin with MovingPictures and MP-TV Series
I had some power trouble and the PC running MP was...
I was able to get a pretty acceptable picture with no delay using the following addition to the ffmeg parameters:
"-use_wallclock_as_timestamps".
Thanks to everyone for their help!!
I was able to get a pretty acceptable picture with no delay using the following addition to the ffmeg parameters...
I have set up a channel through the DVB-IP IPTV Source Filter card that is fed from a VODServer steam that originates from an...
Hello
Please post full log files using the Watchdog. The error log file by itself is not sufficient. Ideally use Watchdog option 2 or 1 ("report a bug...") to reproduce the problem, but if you can't do that you can use option 3 ("export...").
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/3_Forums/2_Log_Files
Hello
Please post full log files using the Watchdog. The error log file by itself is not sufficient. Ideally use Watchdog option 2...
I recently updated my version of JAVA after putting it off for a while in hopes of getting an unrelated application working, and...
I'm pleased to report I've got a reliable WoLAN (but not WoWLAN) solution - I decided to go with the LAN option in the end. The 'impossible' wasn't nearly as hard as I thought once I gave it some proper thought, and as a bonus, I hard-wired the connection for my SwissCom TV box too.
Getting WoLAN to work took some time and effort. I...
I'm pleased to report I've got a reliable WoLAN (but not WoWLAN) solution - I decided to go with the LAN option in the end. The...
I spent the best part of last weekend tweaking my setup to get sleep mode (using PowerScheduler) working reliably. I had to...
Deactivating Blu-ray player did the trick for me:
I also disabled DVD autoplay but in my case it's probably not even needed cause I only rip Blu-rays:
Deactivating Blu-ray player did the trick for me:
I also disabled DVD autoplay but in my case it's probably not even needed cause...
I find I can't easily use MP while doing some Blu-ray ripping in the background cause it keeps on wanting to access my optical...
Thanks, CS. That's very helpful, as being able to rely on grabbing the EPG from just the one channel is obviously very efficient.
Thanks, CS. That's very helpful, as being able to rely on grabbing the EPG from just the one channel is obviously very efficient.
I successfully Installed MP1 v1.12 on my Win 7 PC. After upgrading the OS to Win 10, MP1 continued to work OK (I'm concerned only...
Yes, unfortunately that will happen with each upgrade.
Glad you're up and running again! :)
Yes, unfortunately that will happen with each upgrade.
Glad you're up and running again! :)
I have been running flawless with 1.9 for several months and I decided to upgrade to 1.12... In 1.9, I do have the Hauppage HD PVR...
I also noticed this effect with the new TV that I purchased a few months ago. The TV (a Sony) has various "scene modes" that provide pre-defined combinations of settings for the TV. Some scene modes had this "glow" on text, but others did not. In my case the glow is caused by too much sharpening performed by the TV. Sharpening...
I also noticed this effect with the new TV that I purchased a few months ago. The TV (a Sony) has various "scene modes" that...
Hi,
i have install windows 10 on my htpc an make all fresh. Now i have the Problem that in some textes in titan gui there is a...
Ahhh, that must be a relief. :)
Ahhh, that must be a relief. :)
Apologies in advance if this isn't the right place for this question...
I've been getting some weird behaviour from my HTPC...
In Titan go to Skin settings http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/Settings/2_GUI_Settings/1_Skin_Settings and change Video plaugin to Moving Pictures ...
Read - http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/17_Extensions/4_Skins/aMPed/Basic_Home_Editor
In Titan go to Skin settings...
Hello All,
I have a very strange problem. I've just installed fresh 1.12 version on new PC. Didn't installed any extra add-ons or...
Hi
Pending logs, would suspect that the in-comming files are being checked [MovingPictures?] as the come in for format & other media type info and this is clashing with network thread.
Have you tried importing them to HTPC but in tmp directory, then move [so have to be on same drive as watched folders] files into place - see what...
Hi
Pending logs, would suspect that the in-comming files are being checked [MovingPictures?] as the come in for format & other...
Hi
I wonder if anyone has experienced this or similar issue.
With MP1 installed on my HTPC (Windows 7) when I UNC to my HTPC...
With the list of plugins I still have to work out which are the default ones and which are not.
With the list of plugins I still have to work out which are the default ones and which are not.
Trying to use the new controller support in 1.12. with a wired xbox360 controller.
Works except using the dpad always skips menu...
- Locked
Unpinned.
Unpinned.
There is a known compatibility issue with the current version of the IFC plug-in (version 2.0.3), resulting in loss of control of...
We are gonna get hammered with those. I made the following post sticky maybe it will help.
https://forum.team-mediaportal.com/threads/nvidia-driver-issue-since-358-87.132823/
We are gonna get hammered with those. I made the following post sticky maybe it will help...
Hi guys
Over the last couple of weeks MP has been freezing and I have to use task manager to end it.
It appears to mainly happen...
Thanks mm! I didn't know what was going on or how I was going to fix it. I'm back up and running.
Thanks mm! I didn't know what was going on or how I was going to fix it. I'm back up and running.
My MediaPortal keeps crashing when I try to launch it. Not sure if this has anything to do with it, but it seems to have started...
;)
;)
Hi,
running for more than 8 years MP1 without any big problems...
When this week windows 10 upgrade came (upgraded from previous...
If you can still reproduce your volume repeat issues you could try the build I provided above to see if it fixes it.
If you can still reproduce your volume repeat issues you could try the build I provided above to see if it fixes it.
Hello,
With this new MP version I have an issue with my MCE remote. There seems to be some kind of "repeat" issue when pressing CH+...
My Windows audio settings are just configured to 5.1 surround sound - everything else is set on defaults what can be changed within the Properties.
My Windows audio settings are just configured to 5.1 surround sound - everything else is set on defaults what can be changed within...
Have just made the leap to Win10 and installed MP1.12 on top as a client. Only other changes that ive made on top have been to...
Hi guys,
Thanks for the replies.
It has allready been fixed! I did a full uninstall of the nvidia drivers, and a complete fresh installation, and now the problem has been solved!
Cheers
Hi guys,
Thanks for the replies.
It has allready been fixed! I did a full uninstall of the nvidia drivers, and a complete fresh...
Hi guys,
I have a very weird problem.. Today I updated my pc with the latest updates for Windows 10 and MP 1.13 pre release. Since...
Hello
No update.
I cannot give a certain answer, but I think the most likely result is that it will not work. We certainly have not changed the code to make it work.
DiSEqC should work with the TBS6922 if you are using the TBS patch:
https://forum.team-mediaportal.com/threads/tbs-ci-cam-support-and-other-improvements.103276/
I see...
Hello
No update.
I cannot give a certain answer, but I think the most likely result is that it will not work. We certainly have...
Is DVBSky s950 really supported like it stated in the wiki hardware section?
My setup:
- Win7, x86
- MP 1.7.1
- 2LNBs: Level1AA -...
Thanks for looking at it. Perhaps it's just something with that skin. After all this testing the Avalon skin is starting to grow on me so it's not so bad as I first thought :) Oh, I never mentioned that I see this problem on both my main HTPC and on a client in another room.
Thanks for looking at it. Perhaps it's just something with that skin. After all this testing the Avalon skin is starting to grow...
Hi,
I've noticed a problem with mediaportal crashing due to excessive memory use. When I play music, and leave client on the now...
- Poll
Hello,
I did the proposed change - I changed the computer name and network name and it helped.
thank you!!!
Alex
PS: I didn't check if network error still occurs
Hello,
I did the proposed change - I changed the computer name and network name and it helped.
thank you!!!
Alex
PS: I didn't...
Hello,
I am using MediaPortal Server 1.12.0.0 on Window 7 Ultimate 32 bits.
I plan to use the DVB-IP for IPTV. I installed all...
Just curious... Has the registry setting worked?
Just curious... Has the registry setting worked?
Hi guys,
I've updated my system to Windows 10 recently, and I must say, I'm really happy with it so far..
One thing that is a...
Thanks .... no issues so far ...
Thanks .... no issues so far ...
I'm having issues after the win10 second upgrade. When viewing a video from TV-Series, or Recorded TV, the video exits suddenly...