HI Seal, I have to agree: "This is the best case for media center "
Wonder if you can help me........How did you get the fron panel, card reader and front buttons working?.. I have 3 of these cases and bussy setting them up with MP.
:thx:!!
HI Seal, I have to agree: "This is the best case for media center "
Wonder if you can help me........How did you get the fron...
Hello,
Here is my configuration:
FIC Spectra
MB Gigabyte GA-MA69GM-S2H
Proc: AMD LE-1100 EE
512MB RAM
250GB 2"5 Samsung
DVD-R...
Looks like a really nice setup. Are you using it for gaming or any other purposes besides the HTPC? I noticed you threw in a 4850 video card!
How is the heat in that case?
Looks like a really nice setup. Are you using it for gaming or any other purposes besides the HTPC? I noticed you threw in a 4850...
Just wanted to say thank you guys for the help when choosing parts. Just finished my first build ever!
This is the setup for...
Hi,
some time passed in between, but now I tested MPStandbyHandler with my
setup. In deed it fixed the re-init after standby problem with my SkyStar 2 PCI
card.
But unfortunately it seems to induce new problems. Scheduled recordings sometimes
get not executed now (systems wakes not up) and form time to time MPStandbyHandler...
Hi,
some time passed in between, but now I tested MPStandbyHandler with my
setup. In deed it fixed the re-init after standby...
Hello all,
since MP is getting better and better and I am still struggling with problems with
a SkyStar2 card inside my...
Thanks for the reply - I think I saw a few of your posts on this in another thread. I tried TVversity as an alternative to the supplied D-Link software some years ago, and while it was ok, it was never that stable on my (wired) network. Ideally what I would like is integrated UPnP service on MP, but I will try that plugin for the...
Thanks for the reply - I think I saw a few of your posts on this in another thread. I tried TVversity as an alternative to the...
I know there have been posts about this before, but I cannot find anyone who is actively using MP with DSM-320 running in another...
It is not cleared (unless you explicitly clear it). While it will likely log disk errors, it might not log the reason for the crash (since the O/S crashed the software can't run to log the errors). If you find some events that might be the cause, try Googling the event ID.
It is not cleared (unless you explicitly clear it). While it will likely log disk errors, it might not log the reason for the...
I have an HTPC setup in my living room which is attached to a server hidden away under the stairs via a router. the server is...
Because its not a true backup if the backup is in the same case as the originals
and could be lost if something happen to the pc, I dont want them together
in 1 pc.
Because its not a true backup if the backup is in the same case as the originals
and could be lost if something happen to the pc...
After a crash of one of my HDD's I decided to go for it an build a better server...
I got:
2nd hand HighPoint RocketRAID 2320...
I pulled the USB on purpose :-) with the goal to disable it. The VFD is just a piece of crap that doesnt work as it should, it interferres with other USB devices and that is totally unacceptable.
Beside that, the Imon infrared eye reacted to my Marantz remote, it also interferres with the USB receiver (eadio) form my Dinovo...
I pulled the USB on purpose :-) with the goal to disable it. The VFD is just a piece of crap that doesnt work as it should, it...
Hi folks!
Am not sure if this is the right place to post this but it kinda connects to the "HTPC building" topic, since that's...
Mediaportal RC2 – my move away from VISTA Mediacenter after the TV Pack disaster (only for OEM´s)
Fotostory to be found in the PDF Attachment !!!
Dear community,
I´d like to share some of my experiences with you by explaining my move away from Vista Mediacenter (VMC) towards Mediaportal RC2 for the ones currently asking...
Mediaportal RC2 – my move away from VISTA Mediacenter after the TV Pack disaster (only for OEM´s)
Fotostory to be found in the...
Mediaportal RC2 – my move away from VISTA Mediacenter after the TV Pack disaster (only for OEM´s)
Fotostory to be found in the...
Yes i attached a image from the website and here the link.
Apevia X-QPack 2 (Blue)
One of the better chassis i found since i needed a 3.25" slot for my FloppyDTV.
Yes i attached a image from the website and here the link.
Apevia X-QPack 2 (Blue)
One of the better chassis i found since i...
Ive been running MP for about 1 year now and im almost satisfied now.
Hardware
Case: Apevia X-QPack 2
PSU: 400Watt...
How would you like your hard disk: rare, medium or well done?
Hi,
I did it: I totally fried my hard disk.
While optimizing my CPU load with HD content by using MPC-HC and DXVA I finally managed to have my CPU load as low as 15%, My video card is (as expected) off loading my CPU, but will therefore also become much hotter (around...
How would you like your hard disk: rare, medium or well done?
Hi,
I did it: I totally fried my hard disk.
While optimizing my...
Hi,
When my VCR died on me in the beginning of 2004, I decided to go the HTPC route. I was done with all appliances that only did...
ECS A-780GM-A
AMD Phenom 8450
4GB DDR2-800
550Watt "quiet" Power Supply (18db)
120mm CPU Heatsink/Fan combo (Xigmatek HDT-S120) (replaced the stock fan with a lower noise 120mm fan I had)
1 500GB WD SATA
2 1TB Seagate SATA drives
Blu-Ray/HD-DVD ROM combo drive.
Currently in a Themaltake Desktop case (researching a good HTPC...
ECS A-780GM-A
AMD Phenom 8450
4GB DDR2-800
550Watt "quiet" Power Supply (18db)
120mm CPU Heatsink/Fan combo (Xigmatek HDT-S120)...
ECS A-780GM-A
AMD Phenom 8450
4GB DDR2-800
550Watt "quiet" Power Supply (18db)
120mm CPU Heatsink/Fan combo (Xigmatek HDT-S120)...
It's just long enough, it was a bit tricky. That's actually the only con with the PSU, the 12V cable is a bit bulky as well.
I've actually measured the consumption and it's a about 420-430W. But it doesn't matter, the current setup is dead silent. I do quite a bit of H264 encoding so I sure need the horsepower.
It's just long enough, it was a bit tricky. That's actually the only con with the PSU, the 12V cable is a bit bulky as well...
Summer is here so I thought it was a good idea to finally get rid of my old crappy piece of junk.
The choice of CPU may seem a...
Hi,
actually you can choose where to store the timeshift files and the recordings. Both paths can be selected in the TV server configuration utility. But usually you would choose a local drive on the server to avoid unnecessary network traffic.
Why don't you try out MP before building a dedicated HTPC or even a whole multi-seat...
Hi,
actually you can choose where to store the timeshift files and the recordings. Both paths can be selected in the TV server...
Hi,
I've been looking around the net to find detailed differences between XP and XPembedded version.
I was wondering if maybe...
Hi,
It's been a couple of months now in the making, but now I've really started building my first HTPC.
This of course works fine, I've got a Sapphire HD 3870X2 graphics card for offloading all the work to
the 2 onboard GPUs. A nice AMD Athlon 64 X2 6000+ with 8GB Ram running on a Windows 64bit Vista Ultimate.
"Please ignore...
Hi,
It's been a couple of months now in the making, but now I've really started building my first HTPC.
This of course works...
Hi,
It's been a couple of months now in the making, but now I've really started building my first HTPC.
This of course works...
Yes that helps heaps with that problem. Currently I am running Vista MCE now - as MediaPortal wouldn't recognize my tv card and seem to have issues with the remote control with it. Unfortunely, I do plan to purchase a stand alone remote, but for now I am stuck with the one that comes with Gigabyte GT-PTV-TAF-RH rev 2.0. If anyone...
Yes that helps heaps with that problem. Currently I am running Vista MCE now - as MediaPortal wouldn't recognize my tv card and...
Okay, I have decided to try to turn my extra system into a media centre.
Mostly because my xbox (origional) isn't handling HD...
Thanks for your reply.
The Gigabyte GA-EG45M-DS2H iG45 is a compact board and as there is room in the Silverstone and I want to be able to expand in the future I am thinking a "normal" size board should be better. Also, is it powerful enough for playing games (on a moderate level)?
Good to hear about the CPU!
Thanks for your reply.
The Gigabyte GA-EG45M-DS2H iG45 is a compact board and as there is room in the Silverstone and I want to...
Some time ago I asked you guys about which set up i should have but i never built the computer. Now, months later I have the tv and...
Hi there.
I've been using Mediaportal for 2 months now as my primary STB. Because of instability(No offence to developpers, they have done a great job !) i decided to code a little software, which keeps Mediaportal and tv server up and running i case of a failure. Mostly it is TV server which crashes when zapping from/to HD...
Hi there.
I've been using Mediaportal for 2 months now as my primary STB. Because of instability(No offence to developpers, they...
Hi there.
I've been using Mediaportal for 2 months now as my primary STB. Because of instability(No offence to developpers, they...
Cybermage... thank you!!! Thanks for taking the time to write your post! I've been searching for answers to this problem for days, and haven't been able to find any!
I've been struggling trying to get my Silverstone LC16-M VFD to work with MediaPortal for days...
The good news, is that I now have the VFD display working! :)...
Cybermage... thank you!!! Thanks for taking the time to write your post! I've been searching for answers to this problem for...
HTPC Silverstone Imon building (for dummies like me!)
:D :D :D :D
1. Hardware
2. Software
3. Configuration
4. Finally...
Remapping the Volume Knob for LC16-M
Hi
Can you tell me how you achieved this in girder, I would like to remap the vol button in exactly the same why, so i can navigate the menus.
Thank you
Mike
Remapping the Volume Knob for LC16-M
Hi
Can you tell me how you achieved this in girder, I would like to remap the vol...
Anyone here get their lc16m front-panel working with MP?
I had simply left out that item from my todo list as there were plenty...
yes, I have already found that. I wish a smaller, 45W TPD version of that. Maybe we could downvolt and underclock it for less heat (it has open multiplier!). But it is still too pricey.
The reason for upgrade from my X2 BE-2400 is the better HT bandwith not the CPU performance, it is enough already.
yes, I have already found that. I wish a smaller, 45W TPD version of that. Maybe we could downvolt and underclock it for less heat...
I have just finished my new HTPC based on the above mentioned hardware.
The aim this thread is to share experiences and information...
Hello
In about 2-3 Weeks i will assemble a HTPC for a friend.
He wants to receive and record DVB-S and view DVDs, the HTPC shouldn't be to loud but doesn't need to be loudless.
The components i choose:
Case: Chieftec HE-01B with built in IMon VFD with volume knob
Mainboard: Asus M3A78 Pro with HD3200 onboard
CPU: AMD X2 4850e...
Hello
In about 2-3 Weeks i will assemble a HTPC for a friend.
He wants to receive and record DVB-S and view DVDs, the HTPC...
Hello
In about 2-3 Weeks i will assemble a HTPC for a friend.
He wants to receive and record DVB-S and view DVDs, the HTPC...