Having trouble installing or configuring MediaPortal?
Stell mal dein cam limit auf 4 pro karte
Stell mal dein cam limit auf 4 pro karte
hi, another "problem" occured.
my digital devices cine S2 has 2 tuners on one card.
as i tried to program some recording i found...
thanks for hints!
i found the solution in tv-server config!
thanks for hints!
i found the solution in tv-server config!
hi,
i am new here. installed media portal 1 yesterday and fixed all very fine.
one problem i have not fixed.
in my CI-Module is a...
I have also wanted to do this for a while. I needed two outputs of audio (HDMI for one room) and stereo plugs for another room. I searched Google and these forums for a long time and finally found a solution else where. Here it is for anyone that needs it:
STEPS:
1 - Enter your sound device control panel
2 - Ensure both of your...
I have also wanted to do this for a while. I needed two outputs of audio (HDMI for one room) and stereo plugs for another room. I...
Is it possible to have dual output of the audio coming from Media Portal?
I have two TV's a 46" LCD and to 32" CRT (HD)
The...
I've done re-tunes before to add channels before and there was a biggish change to Freeview not that long ago which resulted in a number of channels changing numbers, all of those worked as intended with channel movement selected.
As I said this was a really strange change as it only affected one channel on the MUX and all that was...
I've done re-tunes before to add channels before and there was a biggish change to Freeview not that long ago which resulted in a...
Hi
I'm running MP 1.7.1
A recent change to the UK Freeview channels has left me with duplicate entries for some channels, with...
Hi,
If you are interested, I found this article by Taylor Kidd which explains Intel power management quite well. Although I did experience the same symptoms on my AMD PC with 'Cool and Quiet' enabled, I would expect Intel power management to be similar.
When I was testing with TV Server I was only recording. I did make note of the...
Hi,
If you are interested, I found this article by Taylor Kidd which explains Intel power management quite well. Although I did...
Hi,
I have a problem, MediaPortal TV Server recordings have picture glitches and sound drop outs (Similar to what you would expect...
Danke!
With HTPC_Sourcer's dll everything works fine now. Thank you all for helping me out! :)
Danke!
With HTPC_Sourcer's dll everything works fine now. Thank you all for helping me out! :)
Hello everybody,
I just switched back from Argus TV to MediaPortal TV Server and now the TV menu item in MP just goes back to the...
Hello,
I'm wondering if anyone has developed an updated scraper for movies in italian language yet, let's say from "mymovies.it" website or something like that.
I'm asking this because I've seen that in previous releases such scraper was included, but as of today it isn't supported anymore.
Maybe someone has already bumped into this...
Hello,
I'm wondering if anyone has developed an updated scraper for movies in italian language yet, let's say from "mymovies.it"...
Hello,
I'm wondering if anyone has developed an updated scraper for movies in italian language yet, let's say from "mymovies.it"...
Hello and welcome :)
Please:
Check the Windows event logs for errors. In particular the application event log.
Make sure you've installed all the pre-requisites.
Make sure your hardware is good enough.
https://www.team-mediaportal.com/mediaportal/requirements
Regards,
mm
Hello and welcome :)
Please:
Check the Windows event logs for errors. In particular the application event log.
Make sure you've...
Just installed. MP will not load. Get error "Media Portal configuration has stopped working". Can't event create logs without errors.
It's more like an update then. If there are old data available, MP tries to keep this during installation... I don't know if MP1 is able to "upgrade" to an identical version. If yes it would be best to also copy the program folder over, as most (if not all) of your plugins are installed instantly then. TVSeries and some others with...
It's more like an update then. If there are old data available, MP tries to keep this during installation... I don't know if MP1 is...
Circumstances force me to replace a completely dead motherboard. Obviously, this means - amongst other things - that I need to...
@ARE2
Please let's keep the conversation in one thread. Your previous thread was fine...
https://forum.team-mediaportal.com/threads/tv-server-wintv-ci-tab-to-choose-descrambling-tuner-dissappeared.129207/
@ARE2
Please let's keep the conversation in one thread. Your previous thread was fine...
Hi everybody,
I have a very strange Problem:
Reinstalled Win7 with all Win-Updates available till now. Then installed the latest...
Wenn ich Radio aufrufe flimmert ca. 1 mal pro Minute das Bild ganz kurz. Am Home-Screen ist das Problem aber nicht.
Wenn ich Radio aufrufe flimmert ca. 1 mal pro Minute das Bild ganz kurz. Am Home-Screen ist das Problem aber nicht.
Wenn ich Radio aufrufe flimmert ca. 1 mal pro Minute das Bild ganz kurz. Am Home-Screen ist das Problem aber nicht.
Trying to organize my videos in WebMediaPortal so that it's not clumped together in one page. I don't if I can do this with user groups or genres. Genres seems promising since that's a drop down menu in WebMediaPortal. But to do that requires me to use MediaPortal Configuration which would take me a long time to go through hundreds...
Trying to organize my videos in WebMediaPortal so that it's not clumped together in one page. I don't if I can do this with user...
Trying to organize my videos in WebMediaPortal so that it's not clumped together in one page. I don't if I can do this with user...
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/Troubleshooting/TV/Repairing_database_(MySQL)
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/Troubleshooting/TV/Repairing_database_(MySQL)
Hallo zusammen,
hab nach der Neuinstallation meines HTPCs diesen Fehler erhalten (siehe Screenshot).
Die TV-Karte und alles andere...
Firstly, apologies for my misunderstanding regarding the blaster. I had assumed the blaster and remote control were connected and you needed to configure both of them. I have now disabled the blaster Plug from TV server. Now when I attempt to preview the capture channel - CVBS#1, I get NoVideoAudioDetected. (and TV Server does not...
Firstly, apologies for my misunderstanding regarding the blaster. I had assumed the blaster and remote control were connected and...
Hi,
I would be grateful for any help advice on how to configure Media Portal to receive data from the svideo / composite input of...
I found the fix! I needed to add the 3306 port to my DSL router by adding it in port forwarding.
I found the fix! I needed to add the 3306 port to my DSL router by adding it in port forwarding.
when I test the MySQL server database connection I get an error stating unable to connect to local host. How do I resolve this on...
I can't and i'm get an AVR in between also. But i never use the volume of MediaPortal (that's always @ 100%), only that from my AVR.
I can't and i'm get an AVR in between also. But i never use the volume of MediaPortal (that's always @ 100%), only that from my AVR.
Hi :)
So the volume stuff is ok from start and didn't work after ?
So official 1.10 all is ok on volume stuff ?
Thanks :)
Could...
Hello, I am attempting to migrate from DVBLink and MS MediaCenter and am having problems
with the sub channels / alternate channels from SKY Bundesliga and Sky Sport.
I have read several post here (Sky Optionskanäle or Sky Bundesliga) but am still uncertain about what I need to do to get the channels listed.
Do I need to scan when...
Hello, I am attempting to migrate from DVBLink and MS MediaCenter and am having problems
with the sub channels / alternate...
Hello, I am attempting to migrate from DVBLink and MS MediaCenter and am having problems
with the sub channels / alternate...
Thanks. That helped.
Thanks. That helped.
Hi,
I installed MedioPortal (client and server on the same machine running Windows 8). Setup went (as far as I can see) good...
Great! :)
Thanks for reporting your success.
Great! :)
Thanks for reporting your success.
So I have searched the Wiki and the forum however was unable to find an answer for my setup problem. I assume it is something...
I installed MP 1.8 on this laptop and it has been working fine for several months. OS Win 8.1
after MP 1.9 came out i tried to install it and it crashes as soon as it unpacks. MP 1.10 does the same thing.
MP 1.8 is still working fine but i would like to update is there any logs or files that i could upload to help fix this problem.
I installed MP 1.8 on this laptop and it has been working fine for several months. OS Win 8.1
after MP 1.9 came out i tried to...
I installed MP 1.8 on this laptop and it has been working fine for several months. OS Win 8.1
after MP 1.9 came out i tried to...
As far as I'm concerned there have been no more issues with TBS tuners than with any other brand. They're very good value for money.
Based on what you've said I think either card would be fine for you.
As far as I'm concerned there have been no more issues with TBS tuners than with any other brand. They're very good value for...
Hi,
I currently have a Hauppage quad card with only 1 DVBS2 tuner and am not looking to replace this with a dual tuner card.
Am...
Hello
I don't ever remember there being such an option... but from your comment about MP 0.0.0.1 and forum join date it looks like you've been using MP much longer than I have. ;)
Strictly speaking, no. There is absolutely no way to 100% prevent a tuner being used for either timeshifting or recording.
Setting the max number of cards...
Hello
I don't ever remember there being such an option... but from your comment about MP 0.0.0.1 and forum join date it looks like...
Hi all
and thank you in advance.
Did I miss it or was the option to assign cards to "only timeshifting" or "only recording"...
Hello and welcome :)
DVB-T2 tuners and channels will show as "DVB-T".
For your tuner, you may need to increase the tune timeout setting. That's according to the info in this thread:
https://forum.team-mediaportal.com/threads/tv-server-help-missing-hd-channels.127613/
Regards,
mm
Hello and welcome :)
DVB-T2 tuners and channels will show as "DVB-T".
For your tuner, you may need to increase the tune timeout...
Hi Everyone,
I'm new to the forum and MediaPortal software. But, I'd imagine I'm not the only person who has asked the question...
Well, I did just that and without making any changes to the defaults, it all works perfectly now. Go figure!
Now to figure out why the SchedulesDirect extension can't find the programs on my OTA PBS station...
Thanks again for all your help!
Well, I did just that and without making any changes to the defaults, it all works perfectly now. Go figure!
Now to figure out...
I just upgraded the drive in my MediaPortal machine to a 4 TB Seagate hybrid drive (runs faster!). Did new install and upgrade of...
Awesome advice as per usual, I really appreciate you sharing your knowledge, thanks. Will try moving timeshift folder over to same HDD as TV recordings folder. Lets see....
Awesome advice as per usual, I really appreciate you sharing your knowledge, thanks. Will try moving timeshift folder over to same...
Upgraded a bedroom client machine (Asrock Q1900DC) and installed MP 1.9. Thing is when the new machine boots up MP or even when...
Happy new year! :)
Do you use a DiSEqC switch to receive from more than one satellite?
Happy new year! :)
Do you use a DiSEqC switch to receive from more than one satellite?
Hi Guys
Every time i try to setup MPplugin with xbmc
There must be problem
Sometime i get problem with rtsp or tvserverxbmc...
BTW my concern here is saving new settings in the TV Server config might change the recorded folder path from its default even if it hadn't been changed by the user (assuming the config utility simply provides a GUI to edit an xml file). I would have expected the config utility maybe to read in the current xml and save it with the new...
BTW my concern here is saving new settings in the TV Server config might change the recorded folder path from its default even if...
HI All,
Been using 1.10.0 and things are looking good guys, thanks!
A couple of things I've noticed:
I would like to put my...
I'll second that, I'm having the same problem. Configuring via the configuration tool works fine.
I'll second that, I'm having the same problem. Configuring via the configuration tool works fine.
Hello,
I tried to add a new video folder in MP via the GUI (not configuration tool). I can select the path but I am unable to save...
SOLVED! Many thanks.
SOLVED! Many thanks.
I have MP1.9 and want to install online videos plug-in but it's not listed in extensions manager.
It did half. Only for public networks.
It is working great. Now I'm gonna look for skins, but I allready like the standard. Nice colour scheme.
It did half. Only for public networks.
It is working great. Now I'm gonna look for skins, but I allready like the standard. Nice...
I just installed 1.9 to check if I can us it for my HTPC. Did that a few years ago too and you came a long way. A very long way...