Having trouble installing or configuring MediaPortal?
I am not an SQL expert. Do you already have a version of MySQL installed?
If the answer is "yes", then try not upgrading MySQL during the MP install, i.e. stay with whatever version of MySQL you already have. Note: you will need to deselect the "install MySQL" option on the relevant panel during the install, as MP will pre-select...
I am not an SQL expert. Do you already have a version of MySQL installed?
If the answer is "yes", then try not upgrading MySQL...
while doing a standard installation with adminstrative priveleges and my antivirus software disable i get the error message below...
My System spec is
Dual Xeon E5620
24GB Ram
Windows 2012 R2 Hyper-V
Media Portal VM is
Windows 2012 R2
8 Virtual CPU's
4Gb Ram
50GB Virtual Disk
Media Portal is connected to Lan via VIrtual Switch with 2x 1gb Intel Server Adapters Bonded via LACP.
HD Home Run is connected to 24 Port Linksys Layer 2 managed webview switch.
I have...
My System spec is
Dual Xeon E5620
24GB Ram
Windows 2012 R2 Hyper-V
Media Portal VM is
Windows 2012 R2
8 Virtual CPU's
4Gb Ram...
I have scanned with my HD home run and can find and watch HD content, but when I scan with MediaPortal it doesn't find the HD...
Hello and welcome Charles :)
Sorry, I don't understand.
Are you saying that you were able to scan with some tuners but not others?
...or are you saying you expected more channels to be found?
...or something else?
Our wiki covers this...
Hello and welcome Charles :)
Sorry, I don't understand.
Are you saying that you were able to scan with some tuners but not...
I want to use Media Portal primarily to watch live TV, record TV shows, and to watch the recordings. I am using win 8.1 and have...
The more I explore, the better I like MePo. There is a learning curve, but the ability to configure it the way I want makes it worth it.
The more I explore, the better I like MePo. There is a learning curve, but the ability to configure it the way I want makes it...
Sorry, I know there's a lot of these question, but I couldn't find an answer that seemed to work for me. It worked great until I...
[SOLVED!!!!!]
The final piece, which probably should have been the first piece, was version incompatibility. My TV server version was way older than my client versions, and I guess there were too many changes in between those two that it couldn't read the database. Updating the TV server to the latest stable release (same as the...
[SOLVED!!!!!]
The final piece, which probably should have been the first piece, was version incompatibility. My TV server version...
Hey all. Hopefully there is a simple fix to my problem...I just cant find what's the issue.
Symptom: fresh client installation...
Thanks that looks like it will do the trick. It looks as if the is a plugin.if_enabled(Settings) or similar that is missing which is why it displays the menu even when settings is disabled.
Agreed about the Settings plugin but I am trying to prevent anyone else being tempted to attempt to tweak things and the seems to be no way to...
Thanks that looks like it will do the trick. It looks as if the is a plugin.if_enabled(Settings) or similar that is missing which...
New to MediaPortal so this is my first install. I am trying to create something that can be used by non-technical users so don't...
Hello
Have you checked whether the settings in the videos section can help?
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/MediaPortal_Configuration/2_Videos#Subtitles_tab
In that case it looks like the MPC-HC, FFDShow and DirectVobSub engines all have settings for subtitle placement if you use the "advanced"...
Hello
Have you checked whether the settings in the videos section can help...
Hello!
I have asked this question earlier couple of years ago, but i still cant fint a solution how i can move subtitles into the...
Are you saying that your cable provider is not encrypting any of its channels? I'd be very surprised if that were the case... and I think some people may want to know who your provider is.
I'm not seeing a relevant attachment.
If you're getting inconsistent scan results then it's possible you haven't set the SDT/VCT timeout high...
Are you saying that your cable provider is not encrypting any of its channels? I'd be very surprised if that were the case... and I...
When running 256 QAM Standard scans, I'm seeing channels marked in Red and Green. The Green channels all appear to be "Active" and...
That's great! :)
You can re-assign the buttons to perform the functions that you want. Although MP has support for "Microsoft MCE", the default button assignments are not as compatible with WMC as you might expect. I customised my remote to match more closely the WMC buttons, especially in the EPG panels (TV and radio). (y) Click...
That's great! :)
You can re-assign the buttons to perform the functions that you want. Although MP has support for "Microsoft...
Hello
I have installed Media Portal 1.11 server on a Windows 8 machine using SQL Server as the database. I also installed the...
Yep, pretty much. :D
My advice would be to keep an eye on that other thread. That'll be where progress is made.
Thanks for your understanding and patience. :)
Yep, pretty much. :D
My advice would be to keep an eye on that other thread. That'll be where progress is made.
Thanks for your...
Played a videogame on steam, fired up Media Portal to watch TV after and got the dreaded message. It was resolved after a server...
Thanks - MYSQL, so I've removed all MSSQL stuff.
Thanks - MYSQL, so I've removed all MSSQL stuff.
Hi,
I have both SQL and MYSQL installed on my Media Portal server, but I don't know which one is in use by Media Portal.
Is there...
Excellent! :)
Thanks for the feedback.
Excellent! :)
Thanks for the feedback.
Been using MP for about two years now. Recently changed my PC name from "PAUL-PC" to "HTPC-MAIN" (cuz we got two !). Changed the...
Hello LionHe
This problem is solved in TVE 3.5. There's no "GUI" solution that I can think of for TVE 3.
Hello LionHe
This problem is solved in TVE 3.5. There's no "GUI" solution that I can think of for TVE 3.
Hello everybody,
I'm using mediaportal 1.10 as a tv server and client. Everything works fine with the exceptoin of the channel...
I copied HTPCInfo TVServer Monitor.exe to C:\Program Files (x86)\Team MediaPortal\MediaPortal TV Server and it's running fine on Win10.
I copied HTPCInfo TVServer Monitor.exe to C:\Program Files (x86)\Team MediaPortal\MediaPortal TV Server and it's running fine on Win10.
I am new to MediaPortal but seem to have it up and running well on my Windows 8.1 HTPC. I had been running Windows Media Center...
Okay, didn't look far enough into the thread to see it had been reposted after it had been taken down at some point...in any case, the good news is that I seem to be making a bit of progress :). After downloading and installing the 3rd party encoders, I was able to get a signal and scan for channels. I believe it has now found the...
Okay, didn't look far enough into the thread to see it had been reposted after it had been taken down at some point...in any case...
I should start by saying that I'm not especially tech savvy...and a little confused. I have been using WMC on my Windows 8.1...
I'm glad to have been able to help. Don't hesitate to ask if you have any further questions. :)
I'm glad to have been able to help. Don't hesitate to ask if you have any further questions. :)
NEWBIE WARNING!
I searched the forum back to 2007 with no luck so I know I must be missing something really simple (and will regret...
Thanks, I think I must have chosen without tv when I installed because I already had MediaPortal 1 on my computer. Thanks.
Thanks, I think I must have chosen without tv when I installed because I already had MediaPortal 1 on my computer. Thanks.
I installed MPExtended.Installers.WebMediaPortal and it calls for using the TV server configuration tool on my desktop, but that's...
Interesting.
I know that QAM 64 is sometimes used. However, this is the first time that anybody has reported having trouble receiving such channels. Therefore I had assumed that tuners just automatically searched for both QAM 256 and QAM 64 at each frequency.
Sorry to say that if your tuner doesn't auto-search QAM 64 then the only...
Interesting.
I know that QAM 64 is sometimes used. However, this is the first time that anybody has reported having trouble...
I have an Hauppauge HVR-1800 that has an analog and ATSC/QAM tuner & it worked in WMC7/Windows 7. I have it set up as a hybrid card...
I finally found the reason for this error. Microsoft Loopback adapter
in address 127.0.0.1 was disabled. There was a message saying that
the adapter is automatically disabled if there are any conflicts. So the
network was OK, but the virtual network card didn't capture the traffic.
Thank you for your help. Mike
I finally found the reason for this error. Microsoft Loopback adapter
in address 127.0.0.1 was disabled. There was a message saying...
Hi,
I can't start TV Server Config. I tried a fresh install with no luck.
What does this cryptic error message mean?
Yes those options are set correctly
I did a number of tests and the results are not consistent.
Depending on how i navigate to watch TV the depends what i get when i switch in back on
Here are the sequence of events and what I get
1.
Start MP -> go to TV Guide -> watch TV -> turn off MP using "x" on top menu.
Restart MP...
Yes those options are set correctly
I did a number of tests and the results are not consistent.
Depending on how i navigate...
I'm still having start-up issues.
The first I think is windows related in that after about 15 minutes of being in sleep mode my PC...
Hello and welcome! :)
LOL, just as I was typing a response too. :D
I'm glad to hear it.
Dude, seriously - a glutton for punishment?!?
Please don't hesitate to ask for help around here. We don't bite. :)
The problem was this:
[2015-06-06 21:41:38,923] [Log ] [22 ] [INFO ] - dvb: RunGraph returns: 0xFFFFFFFE
...which means that...
Hello and welcome! :)
LOL, just as I was typing a response too. :D
I'm glad to hear it.
Dude, seriously - a glutton for...
I've tried a week now to get this to work. System is a single-seat with TV server. Went through the Wiki for installation and...
Unfortunately this is not sufficient. Windows has confusing meanings/rights for administrators.
Okay, thanks.
I have no idea what that error means. MySQL is a third party database system. Usually it just works. When it doesn't, it's tough to know what to do or say... because like you, we're not MySQL experts. We simply bundle MySQL...
Unfortunately this is not sufficient. Windows has confusing meanings/rights for administrators.
Okay, thanks.
I have no idea what...
I'm trying to install MediaPortal on my HP Pavilion 64bit i7, Windows 7 home, 8GB ram and 1 terabyte HD. a Ceton 6 tuner card...
Since I'm using WMC on W7 and W8.1, and wanting to upgrade to W10 (no more MCE), I wonder if I can switch to Mediaportal with the same functionality, given the hardware mentioned in the subj. line.
I want to record shows / series based on search keywords in the tv-guide, like in MCE.......
Please let me know if and how to, a link to...
Since I'm using WMC on W7 and W8.1, and wanting to upgrade to W10 (no more MCE), I wonder if I can switch to Mediaportal with the...
Since I'm using WMC on W7 and W8.1, and wanting to upgrade to W10 (no more MCE), I wonder if I can switch to Mediaportal with the...
I am sure this thread is closed but I have just used it on a clean install for 1.12 pre release and it has works fairly well. It paused on my remote control settings for so long that I closed the program ( no folder found error? ) but it did restore all my libraries and many other settings. Very useful plug in
I am sure this thread is closed but I have just used it on a clean install for 1.12 pre release and it has works fairly well. It...
I am looking for a way to backup all of my mediaportal settings. I came across a plugin called backup settings...
Hat denn niemand eine Idee??
Ich habe nun mehrfach nochmals MP installiert. Immer dasselbe Problem. Was mache ich falsch??
Hat denn niemand eine Idee??
Ich habe nun mehrfach nochmals MP installiert. Immer dasselbe Problem. Was mache ich falsch??
Ich habe MediaPortal auf meinem TestPC komplett neu installiert und den Sendersuchlauf gestartet. Alle Programme wurden gefunden...
I'm currently messing with it, but I assume it is no longer working?
I have: DVBLINK Server 5.0.1 and IPTV plugin
I used the dvblink to m3u script, but can't find the mentioned "Client=78237832478" string anywhere. Maybe they changed it in this version?
edit: found the string, but needed to install dvblink connect server plugin for...
I'm currently messing with it, but I assume it is no longer working?
I have: DVBLINK Server 5.0.1 and IPTV plugin
I used the...
This is a small guide for using DVBLink v4 with MediaPortal.
***** NOTICE ***** NOTICE ***** NOTICE ***** NOTICE *****
For...
No.
So you can:
Leave the first channel ticked, and untick all other channels.
Ensure "store data only for selected channels" is unticked.
Ensure "grab EPG only for channels on same transponder" is unticked.
Nothing has changed. Everybody should apply the necessary configuration to get EPG for their channels. The configuration...
No.
So you can:
Leave the first channel ticked, and untick all other channels.
Ensure "store data only for selected channels" is...
Hi,
I can't use the DVB EPG Grabber while watching TV, because I then have a lot of freezes, artifacts, etc. So I tried to...
My sincerest apologies, when I tried upgrading, i probably saw a notice saying that MP no longer supported XP, I took that as meaning that it wouldn't work on XP. Did not mean to offend. Will try V1.11 if that doesn't do it, then will try 1.3.0
Thank You
My sincerest apologies, when I tried upgrading, i probably saw a notice saying that MP no longer supported XP, I took that as...
I have windows xp and have been using MP for a few of years now. however, since I dropped cable and switched to (atsc) antenna, the...
TVService shoulöd already be getting full access. Could be a Windows thing but reinstalling is not always resetting firewall rules. This is the respective Wiki entry, which is listing TVService:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/1_Getting_Started/11_Preparing_Your_System/Firewall_Settings?highlight=firewall
TVService shoulöd already be getting full access. Could be a Windows thing but reinstalling is not always resetting firewall rules...
Hi there,
following situation. Here, only german T-Entertain IPTV is available. Not all channels are public, but some can be...
No problem, any time. Always happy to help. :)
No problem, any time. Always happy to help. :)
Sorry for asking such an old question, but here goes: I've been away a couple of days, during which time there was a blackout. It...