Problems with the TV-Server or MyTV frontend? Post them in here.
Hi Michael,
thx for your answer, I know I heard that already, how TVSErvice handles all this reload after Standby stuff, so I was wondering that it can really reload it.
You said you had this on all versions? I remember now, I switched to Windows 7 and using extended Stand-by function with the release of 1.3. Before I always used...
Hi Michael,
thx for your answer, I know I heard that already, how TVSErvice handles all this reload after Standby stuff, so I was...
Hi all,
After new installations of Windows and MP to 1.3.0 I have a problem with watching TV after Standby. Only solution is to...
Disabling timeshifting is not possible and it wouldn't make it any faster. I use a ram drive for my timeshift files, but haven't noticed any dramatic improvement, I just use the ram drive to reduce HDD noise + activity.
Disabling timeshifting is not possible and it wouldn't make it any faster. I use a ram drive for my timeshift files, but haven't...
Hi
Im Esi From Iran
Have a Question From MP Producer :
No need to time shift ( Becuase Very Slow To Change Chanal Or Whait For...
Is not based on OS. Go into explorer and enter %programdata% as the path and this should get you to where you need
Is not based on OS. Go into explorer and enter %programdata% as the path and this should get you to where you need
I believe there has been a retune, I have tried to retune but can not find any BBC channels, help pls...
As you say, these are *very* deep changes to our model, and I expect it would be quite a tough job to do properly.
If you're thinking of submitting the patch for approval, please consider...
From a usability perspective, there are precious few people who would benefit from such a change.
In fact, the change may confuse a lot of people...
As you say, these are *very* deep changes to our model, and I expect it would be quite a tough job to do properly.
If you're...
Hello everyone,
My setup is as follows: 2xHauppauge Colossus, each connected to a set-top box. The two set-top boxes are from...
Hi Guys, I updated from MP 1.2.3 to 1.3.0 and since the update the TV and the video watching are "gone". I can see the channels in the TV-Server config "test" without any problem, but when I launch MP and start the TV MP seems to cut the connecting to the screen and attempts to "reconnect" to the TV (the TV signal input display comes...
Hi Guys, I updated from MP 1.2.3 to 1.3.0 and since the update the TV and the video watching are "gone". I can see the channels in...
Hi Guys, I updated from MP 1.2.3 to 1.3.0 and since the update the TV and the video watching are "gone". I can see the channels in...
I've got 62 - however, I am also running DJBlu's freesat patch.
Log files attached.
I ran the 1.2.3 client first, at 22:49, then 1.3.0 client at 22:52.
I've got 62 - however, I am also running DJBlu's freesat patch.
Log files attached.
I ran the 1.2.3 client first, at 22:49, then...
I've upgraded my tv server to 1.3.0 and one of my clients (plus DJBlu's Sky EPG plugin patch). The 1.3.0 was a clean install on...
Well, you have to give us a bit more information or we are really just guessing.
When I posted, I hadn't realised you were new here. Welcome, and enjoy!
Well, you have to give us a bit more information or we are really just guessing.
When I posted, I hadn't realised you were new...
Having had a change to the Mendip transmitter I cannot pick up the new BBC channels (I've done a mendip transmitter re-scan and All...
ok, just did some searching, and found the settings i needed to fix the interlacing. its working now, though the picture quality is a little fuzzy in spots, maybe i just have high expectations. I am using analog signal after all since I refuse to have a cable receiver attached to a computer that has a tv tuner, just seems dumb to have...
ok, just did some searching, and found the settings i needed to fix the interlacing. its working now, though the picture quality is...
I have a Hauppauge HVR2250 which i'm using in analog mode to get my channels
I'm running MP1.30 as a server and XBMC as a client...
Your picture shows that the video is not being deinterlaced, or you are using a very basic deinterlacing algorithm.
From memory vector adaptive is probably one of the best hardware deinterlacing methods supported by GPUs
Your picture shows that the video is not being deinterlaced, or you are using a very basic deinterlacing algorithm.
From memory...
Hi,
I need help regarding configure TV Server
MediaPortal Version : 1.3
TV Tuner Card used : AVerMedia AVerTV Hybrid Volar HD
OS...
well, looking at the amount of threads referring this problem, there are not a lot of people with this issue.
I also tried XBMC as front-end, XBMC is applying a 2-3second buffer on the TV stream. With XBMC I don't get a audio stutter but green colors for 2 seconds.
That's why I did the assumption there is something wrong with the card.
well, looking at the amount of threads referring this problem, there are not a lot of people with this issue.
I also tried XBMC as...
Hi There,
I started playing with mediaportal in 2009 and from that point on I have a annoying issue with the EPG.
I'm using my...
Yes they look good.
http://wiki.team-mediaportal.com/4_HTPC/HTPC_Hardware/Mini_HTPCs_(%22All_in_One%22)/Intel_NUC_DC3217IYE_%2F%2F_DC3217BY
Yes they look good...
Hi
The prob. is that I get stuttering playback after 1-2 minuttes off watching, when watching a HD channel on my multi seat...
If you are using TV server then check in the General Options proper Software Encoders installed. Both video and audio encoders installed state should be Yes. Other chances are you card not recognized by MP server.
If you are using TV server then check in the General Options proper Software Encoders installed. Both video and audio encoders...
Hi,
I formatted my HTPC today and reinstalled everything from scratch. Before I already had MePo 1.3 running fine.
I didn't make a...
2013-04-03 19:47:12.750943 [(15)]: Tvservice stopped due to an unhandled app domain exception System.ArgumentException: Parameter is not valid.
at System.Drawing.Image.FromStream(Stream stream, Boolean useEmbeddedColorManagement, Boolean validateImageData)
at System.Drawing.Image.FromStream(Stream stream)
at...
2013-04-03 19:47:12.750943 [(15)]: Tvservice stopped due to an unhandled app domain exception System.ArgumentException: Parameter...
I have an issue where myt tv service keeps crashing - it can last several hours or keep failing instantly. Has only been a problem...
After spending some time trying to get any of the radio plugins workin with 1.3 with very disapointing results. I was able to use the Web Stream card built into the TV server to access the limited number of radio channels I actually wanted to listen to. What I am missing though, is a means of identifying/displaying them with logos. Is...
After spending some time trying to get any of the radio plugins workin with 1.3 with very disapointing results. I was able to use...
After spending some time trying to get any of the radio plugins workin with 1.3 with very disapointing results. I was able to use...
I've had live tv + recordings working using Win8 x64 Pro VL, not sure if that includes media centre pack or not. However I found channel changes slow with occasional crashes. Went back to Win7 x64, much better.
I've had live tv + recordings working using Win8 x64 Pro VL, not sure if that includes media centre pack or not. However I found...
Hi,
I have a problem playing recordings or live TV on my new PC on Windows 8 Pro x64. If I select a recording or live TV then...
Hey. It seems that I have a similar issues. Sometimes when playing a TS file from the network the playback stutters. (GB LAN). Restarting the machine solves the issues for sometime. Playing the same file locally I don't have any issues.
How did you find out that it is a network driver issue? Any tool you used? Any test you run...
Hey. It seems that I have a similar issues. Sometimes when playing a TS file from the network the playback stutters. (GB LAN)...
Hello, while watching live TV sometimes stuttering happens, say only once each 2-3 hours. I have no idea about what can cause this...
Ok, so I was stupid enough to try to add a 2nd tunercard to the setup, and now the "no signal" issue is back once again, even reinstalled it with just the one card, and it still doesn't work.
Are there any known issues with this setup?
Ok, so I was stupid enough to try to add a 2nd tunercard to the setup, and now the "no signal" issue is back once again, even...
Ok, so now I'm having the same issue once again, I'm having no issueds scanning or tuning in WMC on the same computer, but MP is...
MP1
MP2
Help on two issue - displaying data from tuningdetails.xml and modifying common.overlay.xml
DE
I'm trying to modify the information displayed in the video preview window. Unfortunatly I'm not able to splitt between Video and TV (THX Dadeo for your input by the way) so when I for example want to display the senderlogo when TV is running it is going to stay there when a Video is playing. I tried with several combinatinations of...
I'm trying to modify the information displayed in the video preview window. Unfortunatly I'm not able to splitt between Video and...
I'm trying to modify the information displayed in the video preview window. Unfortunatly I'm not able to splitt between Video and...
Hi.
We are relocating to the US shortly (Plano, TX), and having seen the many options available for our TV service, was after some suggestions regarding moving to a dedicated TV server. I was hoping to get a Ceton InfiniTV4 to put into my N36L Microserver, but I believe the CableCard functionality is not quite there yet. So, what...
Hi.
We are relocating to the US shortly (Plano, TX), and having seen the many options available for our TV service, was after...
Hi.
We are relocating to the US shortly (Plano, TX), and having seen the many options available for our TV service, was after...
the tv guide data is wiped when u upgrade, so u need to "fill in the blanks" as it were
the tv guide data is wiped when u upgrade, so u need to "fill in the blanks" as it were
I get an empty TV guide with the "missing label" message after an upgrade from 1.2.2 to 1.3 on a Windows 7 system. I use XMLTV to...
...I get an "unknown error" when I select a channel from the TV Guide. After a reboot I now find that WMC can't access the TV tuner either - it says that another application is using it
???
...I get an "unknown error" when I select a channel from the TV Guide. After a reboot I now find that WMC can't access the TV tuner...
I decided to try out the TV service with Windows Media Center (on Windows 7 Ultimate SP1), and set up the tuner for it. Now...
Hi itm,
Are you using the LAV filters?
Have you enabled the hardware acceleration ?
Do you have the same problems with recorded programs?
Can you post your logs, otherwise no one can help you.
Hi itm,
Are you using the LAV filters?
Have you enabled the hardware acceleration ?
Do you have the same problems with recorded...
I just replaced MP 1.2.2 with 1.30 on a Windows 7 machine. I have a Blackgold BGT3620 DVBT2 card with the latest drivers installed...
Sorry for the delay. I have had to reinstall MP last week (once more...) because Live TV started not working again (loosing channels, stuttering...). Now all is back to normal.
I run the test but I can no longer reproduce the issue as I reformatted the NAS so the user accounts match between W7 and NAS. So your test file just lists...
Sorry for the delay. I have had to reinstall MP last week (once more...) because Live TV started not working again (loosing...
Hello,
When I delete a TV recording in MP, it is dropped from the database but the file is not deleted from the disk. This fills...
Any solutions?
Any solutions?
MediaPortal Version: 1.2.2.0
MediaPortal Skin: Black Glass
Windows Version: Win 7 32-bit
CPU Type: AMD BE-2400
HDD: SSD OCZ...
Same phenomenon here. Works without stuttering on Windows Media Center.
Same phenomenon here. Works without stuttering on Windows Media Center.
MediaPortal Version: 1.2.2
MediaPortal Skin: Avalon HD
Windows Version: Windows 7 x64 (all latest updates)
CPU Type: Intel E8400...
Not sure if MePo has an option that meets your needs. For your request you want something that lets you enable per series "duplicate recording checking" by episode name. Or a global option that only enables "duplicate recording checking" when there is a valid episode name. Maybe this should be an enhancement request for a future MePo...
Not sure if MePo has an option that meets your needs. For your request you want something that lets you enable per series...
Hi,
I upgraded to the 1.3RC and i have a trouble with recording.
When the show start to recording is stopped.
I see this...
@jameson_uk @Owlsroost
Just a quick update and message of thanks.
First I tried using LAV with Aggressive Deinterlacing and I was getting more dropped frames than with the MS Codec. I then tried the "non stop mod70" TS Reader and this reduced the dropped frames from about 130 per 20,000 to 3 per 30,000 which ain't bad at all. :D...
@jameson_uk @Owlsroost
Just a quick update and message of thanks.
First I tried using LAV with Aggressive Deinterlacing and I...
Hi Guys,
I'm being a bit picky trying to resolved a dropped frames problem (well, not really a problem, I'm just being a bit anal...
AFAIK you don't need to share the root drive of the server.
AFAIK you don't need to share the root drive of the server.
Hello,
I am running 1.3RC in a Server-Client multiseat setup.
Server is a WHS2011, Client W7 x64 Home Premium installation...
I've been using exactly what you are trying to do for several years for my Dish Network box. However, I don't have lots of channels that I actually want in my EPG. This should work.
Here are some suggestions. Only grab data for the channels you want. Create the mc2xml.chl file with the channels that you wish to grab the data for...
I've been using exactly what you are trying to do for several years for my Dish Network box. However, I don't have lots of channels...
Been trying to get EPG for my cable box hooked up through the composite port on my Hauppauge HVR 1290. I have XmlTv setup with...
I managed to prevent this problem by extending the length of time for "EPG grabbing while idle". The Refresh was set to 60 minutes and I changed it to 720 minutes (6 hours) and the problem hasn't occurred for 2 or 3 weeks. But some problem there somewhere.
I managed to prevent this problem by extending the length of time for "EPG grabbing while idle". The Refresh was set to 60 minutes...
TV Service version 1.2.3
AMD Phenom 2.10Ghz 8450 tripple-core
Windows 7 Ultimate 32-bit 2GB RAM (55% physical RAM used)
Used as a...