Television (MyTV frontend and TV-Server) (484 Viewers)

Problems with the TV-Server or MyTV frontend? Post them in here.
Ahh I see. Thanks for the reply!
Ahh I see. Thanks for the reply!
I've updated to 1.3RC but when I open up the TV-Server Config, in the About section, it lists it as 1.2.3. Also, when I open the...
Replies
2
Views
857
@AtTimesPerplexed, thank you thank you thank you! I was also receiving the bad signal error after installing on Windows 8 (which runs awesome with Mediaportal) and I was receiving the same errors. Can I suggest that rather than turning off the antivirus it is better to create an exception for the TVService.exe. This fixed my...
@AtTimesPerplexed, thank you thank you thank you! I was also receiving the bad signal error after installing on Windows 8 (which...
I have recently started getting bad stuttering and signal break up on recorded TV. Live TV is fine. If I look in the tswriter...
Replies
4
Views
3K
I've been using MediaPortal for over a year now, but haven't gotten much into the TV Server part of it until recently and I have some questions. They may be newbie questions or they may be more advanced. I don't know enough to know which they are...yet. So, I can use the TV Server to scan for channels and it picks a bunch up. But...
I've been using MediaPortal for over a year now, but haven't gotten much into the TV Server part of it until recently and I have...
I've been using MediaPortal for over a year now, but haven't gotten much into the TV Server part of it until recently and I have...
Replies
0
Views
2K
Would definitely be nice! :)
Would definitely be nice! :)
On having started the TV always there begins in a concrete channel, which turns out to be a bit troublesome to the being a channel...
Replies
10
Views
3K
Hello! I just bought an AverMedia A835 USB TV Tuner; it is ok with its own application and within Windows Media Player. Will it work with MediaPortal? I'm looking for an alternative that will allow me to watch a show I'm recording timeshifted. I'll try to explain better: I'll record a show that starts 21.00 and ends 23.00 and then...
Hello! I just bought an AverMedia A835 USB TV Tuner; it is ok with its own application and within Windows Media Player. Will it...
Hello! I just bought an AverMedia A835 USB TV Tuner; it is ok with its own application and within Windows Media Player. Will it...
Replies
0
Views
2K
" Username for timeshifting users are the same as the client's computer name."
" Username for timeshifting users are the same as the client's computer name."
Hello, MePo 1.30 RC has a new option in the TV-Server config. User prirorities: See here: WIKI The info that I'm missing is how...
Replies
1
Views
940
MP1 MP2 HVR-2250 Setup DE
try switching "Preferred Network Provider" to "generic", see the following forum message. https://forum.team-mediaportal.com/threads/tv-server-setup-scanning-channels-no-signal.116336/#post-963385
try switching "Preferred Network Provider" to "generic", see the following forum message...
Trying to set up an old HVR-2250 card I have. I used BeyondTV for years, but I remember getting MediaPortal to work with this card...
Replies
1
Views
1K
MP1 MP2 First tune time DE
Too bad. :( But I think 8 secs are okay.
Too bad. :( But I think 8 secs are okay.
Hi I was looking for a way to reduce the first tune time down. I'm running the custom data grabber branch (it has the...
Replies
6
Views
1K
MP1 MP2 Timeshift DE
Short and in the same way unsatisfying. Who needs this "feature". Maybe some of the developers could think about changing this? Because I really think, there's no PVR existing with such timeshift-behavior ...
Short and in the same way unsatisfying. Who needs this "feature". Maybe some of the developers could think about changing this...
Hi together! Short question: Is it somehow possible to clear the timeshift-buffer on every channel-change? Reason for my...
Replies
2
Views
1K
Yes, my problem seems to be a different one, because I don´t use that plugin. But thank you for your reply!
Yes, my problem seems to be a different one, because I don´t use that plugin. But thank you for your reply!
Hi, when I start record one channel and switch to an other, the recording stops, but the sign for recording in the upper corner...
Replies
11
Views
2K
Interestingly, I haven't seen the problem I described above in a while, and it appears to have stopped around the time I switched to the current version of LAV (0.55.1) for almost all of my codecs. Sasha
Interestingly, I haven't seen the problem I described above in a while, and it appears to have stopped around the time I switched...
When playing back recorded TV, I experience occasional jumps during the playback. For example, I can be 27:13 into a recording...
Replies
1
Views
825
MP1 MP2 problem with Iptv DE
yes it's working!! i've read it before but i thank it was for MP 1.2. I also give the liste for the free M3U orange channel in france. Thanks for your help.;)
yes it's working!! i've read it before but i thank it was for MP 1.2. I also give the liste for the free M3U orange channel in...
Hello i can't see any iptv's channel. no problem with Dvb-t channel. I think it's a codec problem. i've done many change, it...
Replies
13
Views
4K
I reinstalled Media Portal and everything seems to be working just fine! Thanks for helping me! :-)
I reinstalled Media Portal and everything seems to be working just fine! Thanks for helping me! :-)
The TV-server used to record my shows, but it stopped doing so. I've scheduled recordings for several days and it will not record...
Replies
10
Views
2K
Vertex buffer creation fails for some reason (logs wont show that). To gain more information you would need to do following: 1) Install DirectX Control Panel -> http://www.majorgeeks.com/Microsoft_DirectX_Control_Panel_d4017.html 2) Install DebugView -> http://technet.microsoft.com/en-us/sysinternals/bb896647.aspx 3) Open...
Vertex buffer creation fails for some reason (logs wont show that). To gain more information you would need to do following...
DVB subtiles are not working.. They used to work a couple of months ago but after I installed some new MP version I lost subtitles...
Replies
2
Views
2K
I've been using mediaportal for about 5 years and always had issues with Slow Zap. Black Screens intermittantly. Freezing and sometimes jerky TV. I found Firewalls cause this. Comodo and AVG. I did the following 1. Put the the entire media portal folders. Programs and settings folders as exclude from Virus scanning and Defence and...
I've been using mediaportal for about 5 years and always had issues with Slow Zap. Black Screens intermittantly. Freezing and...
Hi, I'm new at this, trying to get a simple HTPC setup on which I can reliably watch TV. But the time it takes to start live TV...
Replies
8
Views
7K
Hello All, I'm trying to get 2 STB working to be able to watch a show while recording another one on a different channel and also possibly watching 2 show simultaneously via multiple MP client. I'm using a Hauppauge HD PVR and a a Hauppauge Colossus card to do this. Both STB have the exact same line-up so the channel list is...
Hello All, I'm trying to get 2 STB working to be able to watch a show while recording another one on a different channel and also...
Hello All, I'm trying to get 2 STB working to be able to watch a show while recording another one on a different channel and also...
Replies
0
Views
956
It automatically restarts when you change port number. Manually I also restarted it and nothing.
It automatically restarts when you change port number. Manually I also restarted it and nothing.
Hello everyone, I have searched in this forum for my particular problem and found some posts describing my problem but the...
Replies
16
Views
4K
Thanks, I think that has helped a little bit although it is pretty fast now already. I now tune most SD channels in under a second. Sometimes it takes a little longer but never more than 2 seconds.
Thanks, I think that has helped a little bit although it is pretty fast now already. I now tune most SD channels in under a second...
I am trying to find out why it takes my HTPC so long to tune channels. When I switch on TV mode it takes around 15 seconds and to...
Replies
41
Views
15K
Need to know where in the world you are. Is the tuner analogue or digital? Type of signal ? When you enabled EPG in config, did you check the channels to grab/store EPG data for? Oh, and MP will only grab EPG data if your broadcaster transmits it.
Need to know where in the world you are. Is the tuner analogue or digital? Type of signal ? When you enabled EPG in config, did...
Hi everyone, first time setting up MediaPortal. Went through the Wiki to install and configure MP. I am using AverMedia tuner...
Replies
1
Views
974
http://www.satellite-calculations.com/DVB/1west/Swedish_Nordig_Channel_List.htm
http://www.satellite-calculations.com/DVB/1west/Swedish_Nordig_Channel_List.htm
Hi, Does anyone by chance have a updated Canal Digital (Nordic satalite) frequency- /channel list for me? It would be most...
Replies
2
Views
3K
Found a thread that listed how to run a repair on the TV Server DB. https://forum.team-mediaportal.com/threads/tv-recordings-disappear-after-channel-rescan.98462/#post-769003 Followed the command in there and did a re-scan and everything is now okay. During the repair process it listed a couple of errors stating that a table wasn't...
Found a thread that listed how to run a repair on the TV Server DB...
A couple of channels recently have stopped working when they previously worked fine. If I try to change to one of them, the screen...
Replies
1
Views
3K
MP1 MP2 1.2.3 Audio Issue DE
I'm having an intermittent problem starting the tv client in 1.2.3. Sometimes I start it, select TV and it works fine. Other times it just shows the blue background and freezes. I'm using an ATI HD 4850 for sound via HDMI. Extract of the logs for when it doesn't work: A reboot typically fixes it but any ideas? Thanks.
I'm having an intermittent problem starting the tv client in 1.2.3. Sometimes I start it, select TV and it works fine. Other times...
I'm having an intermittent problem starting the tv client in 1.2.3. Sometimes I start it, select TV and it works fine. Other times...
Replies
0
Views
1K
Hi guys, just an update, everything is still running smooth now with the MS lookback adapter installed.. So; fingers crossed! And let's hope this was THE solution..
Hi guys, just an update, everything is still running smooth now with the MS lookback adapter installed.. So; fingers crossed! And...
Hi guys, I'm very sory to say that this horibble message, including a no working tv-server problem is back again.. After...
Replies
21
Views
9K
That would be terrific. Please keep us informed of your progress. Sasha
That would be terrific. Please keep us informed of your progress. Sasha
I've got the Hauppauge Colossus card taking video from DirecTV. (My computer runs Windows 7.) I would like to be able to set up...
Replies
2
Views
1K
MP1 MP2 ATSC Channel 9.1 CFTO Channel Info (1 Viewer) DE
WGRZ (NBC) stopped tuning in both MediaPortal TV Server and Argus for the past couple of weeks or so. Same with you? My Sony TV's ATSC tuner has no problems tuning it.
WGRZ (NBC) stopped tuning in both MediaPortal TV Server and Argus for the past couple of weeks or so. Same with you? My Sony TV's...
Could anyone who has channel 9.1 CFTO in the GTA scanned in provide me the tunning details? I know its available because other...
Replies
9
Views
2K
strange thing ... looks good as far as i can mention form here. well maybe winfast will bring the answer ...
strange thing ... looks good as far as i can mention form here. well maybe winfast will bring the answer ...
Hi there, Have tried all of the suggestions here but cannot get it to work. WMC works fine, attached logs which I'm hoping will...
Replies
9
Views
2K
Hi, I have recently bought a CCTV system that has a networked DVR. What I'd like is to have is a separate TV channel for each of cameras and maybe one that will display them all. As there is a web interface I can stream the cameras over the network fine and have got them setup in Mediaportal using the RadioWebStream so they appear...
Hi, I have recently bought a CCTV system that has a networked DVR. What I'd like is to have is a separate TV channel for each of...
Hi, I have recently bought a CCTV system that has a networked DVR. What I'd like is to have is a separate TV channel for each of...
Replies
0
Views
790
MP1 MP2 TV Service stops working each time (1 Viewer) DE
I know this thread is a little stale, but it doesn't lead to a solution with the Terratec Cynergy T-Stick Video HD, so I will give you one, at least for AV Composite in (I have no need for DVB-T as all my set top boxes work off satellite inputs). I could not get the Cynergy stick to work cleanly with the packaged Terratec Home Cinema...
I know this thread is a little stale, but it doesn't lead to a solution with the Terratec Cynergy T-Stick Video HD, so I will give...
Hello, For some reason the TV in MediaPortal freezes after a while. After restarting the TV Service it works again, till it...
Replies
9
Views
5K
Thanks, in the end I just uninstalled MP and reinstalled with the new 1.3 beta and everything is working again.
Thanks, in the end I just uninstalled MP and reinstalled with the new 1.3 beta and everything is working again.
Had the TV front end set up for a couple of weeks now and evrything has been working fine. Suddenly last night I notice recordings...
Replies
3
Views
1K
Hi, are there any new findings on this subject ???
Hi, are there any new findings on this subject ???
MediaPortal Version: 1.1.3 MediaPortal Skin: xFactor Windows Version: Windows Vista Ultima SP2 CPU Type: Intel Pentium 2x2.5GHz...
Replies
8
Views
2K
Top Bottom