Problems with the TV-Server or MyTV frontend? Post them in here.
MP 1.20 TVServer compatible (hopefully) dll's attached. I think you only need to swap PowerScheduler.dll, but it creates three dll's when you build the PowerScheduler project so I've included all three...
MP 1.20 TVServer compatible (hopefully) dll's attached. I think you only need to swap PowerScheduler.dll, but it creates three...
I suspect non one relies on the fact that PowerScheduler IWakupHandler has a bug, but I am a pureist so when I saw the log below I...
Hi,
I was using Mediaportal 1.16 to receive a multicast UDP stream (H264@14Mbps) from a device locally without issue. I recently upgraded the Mediaportal hardware (and with it from Windows 7 to Windows 10 and MP 1.16 to MP 1.20). Viewing the same stream now suffers discontinuities. I have tried to rule out other network elements...
Hi,
I was using Mediaportal 1.16 to receive a multicast UDP stream (H264@14Mbps) from a device locally without issue. I recently...
Hi,
I was using Mediaportal 1.16 to receive a multicast UDP stream (H264@14Mbps) from a device locally without issue. I recently...
If you play one of the 'problem' recordings *locally* on the server, does it play OK?
If you play a 'problem' recording remotely several times, does it stop/stutter in the same places?
Those tests should tell you if it's the actual recording file that is corrupted, or if it's a remote playback problem. Let us know the results and...
If you play one of the 'problem' recordings *locally* on the server, does it play OK?
If you play a 'problem' recording remotely...
Hi guys
for some reason i have been having a problem with tv playback. other playback of files works fine so still able to watch...
happens with viewmodeswitcher plugin activated ...
disable or configure it and it should run non stretched again...
gl
happens with viewmodeswitcher plugin activated ...
disable or configure it and it should run non stretched again...
gl
Hi All
I have found, Media Portal 1 Client is always stretching the TV. I have tried all the Aspect Ratio, but still the TV is...
Ok, thought so, as I do not think that TVservice should exit wenn EPG grabbing is activated for DVB-IP...
Ok, thought so, as I do not think that TVservice should exit wenn EPG grabbing is activated for DVB-IP...
Hi,
for a few days now I notice (1.19 as well as 1.20pre) that my TVService keeps quitting itself and I dont know why. There are...
That was indeed the problem. Many thanks.
That was indeed the problem. Many thanks.
I experienced a strange problem with TVServer last night. I had several programs scheduled to record at 20.00, 20.30 and 21,00...
Hey, did you try to rescan channels? Maybe their params have changes. Or you could post logs with watchdog tool
Hey, did you try to rescan channels? Maybe their params have changes. Or you could post logs with watchdog tool
Hello Guys
I have installed Mediaportal 1 and i used it for a day but now i just can watch a channel in other channels it says...
MP1
MP2
[solved]
MediaPortal do not show TV Channels, although Channels found in TV-Server Configuration
DE
I'm really really happy when my noob knowings help people!
I don't think deleting thread will be right since someone with similar problems could find them, look at logs and maybe find some answers. Anyway, it's up to @Moderators to decide it.
Also I think it could be a bug if All channels group is missing and you didn't delete it. I...
I'm really really happy when my noob knowings help people!
I don't think deleting thread will be right since someone with similar...
Hi All
I am using MediaPortal v1.19.0 for AVerTV Hybrid Volar HD H830 in MP1.
Although TV-Server Configuration found 141...
Ahh, OK. I didn't get a notification for doskabouter's reply?? Thanks for letting me know. I'll catch up with him.
Ahh, OK. I didn't get a notification for doskabouter's reply?? Thanks for letting me know. I'll catch up with him.
Hi,
I've had a TV Client/Server system working perfectly well. But after I upgraded Windows 10 on the server to version 1803, I...
I did an unsinstall of the TV Server, created a blank database, ... but will try again that weekend maybe.
I did an unsinstall of the TV Server, created a blank database, ... but will try again that weekend maybe.
Hello,
something strange has happened ... form one restart to another the TV Card suddenly was shown as "unknown". I did eben...
Bit late, but I just stumbled on the same issue.
There's a config setting in TVServer/Plugins/Mediaportal IPTV filter and url source splitter/Database Editor.
You can set the useragent (one of the properties on lower half of screen) for any channel you select.
Don't forget to store the changes though...
Still have to find a way to set...
Bit late, but I just stumbled on the same issue.
There's a config setting in TVServer/Plugins/Mediaportal IPTV filter and url...
Hi, is it possible to define somewhere the user agent that tvserver is sending out. I think right now by default it does not send...
Long time MP user here, stumped.
Installed HDHomeRun Prime in Windows 10 box.
HDHomeRun app and NPVR both work just fine.
Followed the wiki and the thread to the letter, as far as I know.
Cable service is all SDV, cable card and tuning resolver are required and installed and working.
MP 1.18, just installed over equally incapable...
Long time MP user here, stumped.
Installed HDHomeRun Prime in Windows 10 box.
HDHomeRun app and NPVR both work just fine.
Followed...
Long time MP user here, stumped.
Installed HDHomeRun Prime in Windows 10 box.
HDHomeRun app and NPVR both work just fine.
Followed...
Same discontinuities with TVE3.5. Full logs attached, in case anyone is still reading ;-)
Get a lots of "2018-03-10 14:25:49.114 recorder: PID 5119 unsignaled discontinuity, value = 0, previous = 9, expected = 10, count = 908, signal quality, descrambling, or HDD load problem?"
This logs suggests Problems I think I ruled out...
Same discontinuities with TVE3.5. Full logs attached, in case anyone is still reading ;-)
Get a lots of "2018-03-10 14:25:49.114...
Hi, since a few weeks I have a huge problem with discontiuties in the log which lead to failed recordings. Usually these...
Ok, found it by myself. Disabling IPv6 in network settings did the trick.
Ok, found it by myself. Disabling IPv6 in network settings did the trick.
Hey guys,
having quite a few problems lately with my client setup. One of the problems currently is that tuning of a channel takes...
Doh! I've moved from a DVB-T2 Freeview system to a DVB-S2 Freesat system and that possibility really hadn't crossed my mind, as on DVB Freeview, it didn't seem to matter when a channel was "on" or "off-air".
Mind you, I'm also finding that on Freesat, you seem to need double the amount of tuners to get the same flexibility, so you...
Doh! I've moved from a DVB-T2 Freeview system to a DVB-S2 Freesat system and that possibility really hadn't crossed my mind, as on...
Hi,
Sorry if this is the wrong place... I was using DJBlu's Sky grabber but have disabled it due to the recent changes breaking...
Thanks, I will read up on that.
Thanks, I will read up on that.
My current setup:
Mediaportal TV Server (v 1.18.1 on Win7 Pro) - wired network connection
Kodi (v 17.6 on Ubuntu 16.04.3) - wired...
MP1
MP2
How to edit the scheduled stop time on a recording with negative minutes to resolve conflicts
DE
I get a conflict every time a TV show claims that it stops one minute past the hour. That causes a conflict with the next hour since the one minute overage claims the entire next half hour or hour as if it was a continuing recording. Is there any way to edit the stop time so I just lose that one minute? ( like my old VCR let me do...
I get a conflict every time a TV show claims that it stops one minute past the hour. That causes a conflict with the next hour...
I get a conflict every time a TV show claims that it stops one minute past the hour. That causes a conflict with the next hour...
How are things going Jamie?
Have you given up, or are you just busy?
How are things going Jamie?
Have you given up, or are you just busy?
I have so many symptoms that I am wondering if I shouldn't just uninstall and wipe everything and start over. #4 below is the only...
In 1.19 this still helps / works.
While setting this to 0, the zap speeds are fast, but also instable. Also 1 (error) and 2 (warning) will speed up the starting and stopping of channels, but it will crash the TV-Server often.
Putting it to 3 (info) or 4 (verbose) will stop the TV-Service from crashing when zapping or stopping a...
In 1.19 this still helps / works.
While setting this to 0, the zap speeds are fast, but also instable. Also 1 (error) and 2...
Hi guys,
The last few months our TV Server service became unstable. When stopping a TV stream of changing to another channel, the...
Wow that was quick...!
Checked your link to the problem, and see I did almost everything OK, but failed to change the Schema name.
But I just removed everthing again but now also removed Mysql and the DD drivers, reinstalling should now solve the problem.
Thanks for the super quick reply, much appreciated!
Wow that was quick...!
Checked your link to the problem, and see I did almost everything OK, but failed to change the Schema...
When I try to start TV server setup, it seems it cannot find any free TV tuning cards, but there should be TWO available (Digital...
Windows Services said TV Server had started but it must have been mistaken.
I restored the original Program Files\MySQL and ProgramData\MySQL on the actual computer where it was installed, but it didn't work. Perhaps it was folder security issues, I don't know.
I tried the same on a VM which is set to the exact same computer name...
Windows Services said TV Server had started but it must have been mistaken.
I restored the original Program Files\MySQL and...
TV Server 1.18.0
Windows 7 32-bit
4GB RAM
AMD Phenom I CPU 2.1Ghz triple core
I'm just wondering if this is normal. Every 15...
Hey thanks so much for the quick reply.
This totally solved my problem, and MP is also much more responsive now.
Many Thanks
I really appreciate it !
Hey thanks so much for the quick reply.
This totally solved my problem, and MP is also much more responsive now.
Many Thanks
I...
Hi
After upgrading to MP 1.18.0:
- If I play a recorded TV program, I get sound OK
- However if I stop, and then later resume...
hi. I have similar problem. I managed to scan dvb-t and -s programs,but for some reason dvb-s freezes after several minutes of use and during this problem i can not use mp.same problem with dvb-t. in other hand,when i am using preview in mp tv settings and when i am usin hauppauge software for live tv,there is no problems at all. i...
hi. I have similar problem. I managed to scan dvb-t and -s programs,but for some reason dvb-s freezes after several minutes of use...
Hi. I recently reinstalled my BlackGold TV card, but the DVBS scan returns only no signal? The DVBT scan works fine.
I tried to...
What a speedy service! Again, thanks - that will save a good chunk of time!
What a speedy service! Again, thanks - that will save a good chunk of time!
Hi,
I have decided to replace my existing HTPC with a brand new system. My plan was to migrate all the data first - all done...
Please attach full log files from both client and server. Use the provided Watchdog tool if possible.
Please attach full log files from both client and server. Use the provided Watchdog tool if possible.
Hi guys,
I still have Problems with my client-pc to connect to my Server. I always get above Connection error to the database. My...
Enter 4 numeric digits representing "hhmm", where this is the offset in hours and minutes from the start of the recording. Example: if the recording is 60 minutes in length, enter "0030" to jump to 30 minutes from the start of the recording.
-- from CyberSimian in the UK
Enter 4 numeric digits representing "hhmm", where this is the offset in hours and minutes from the start of the recording...
Hi,
I don't see the navigation (timeline) for recorded TV programs. I can play, but there is no play head to move to different...
I hope someone can help with a problem that crops up occasionally, roughly every month or so. Please see the attached screenshot for the quickest description. As you will see recording is working fine (and it always does) - so why the apparent problem with the service/server name?
In itself this is not a major problem, except that...
I hope someone can help with a problem that crops up occasionally, roughly every month or so. Please see the attached screenshot...
I hope someone can help with a problem that crops up occasionally, roughly every month or so. Please see the attached screenshot...
Thanks, I'll wait and see what DD has to say.
Thanks, I'll wait and see what DD has to say.
After several years of abstinence, I have added some premium channels to my cable TV subscription and have plugged my CI/CAM module...
Hi. I found some kind of problem with my router. Firmware reset and all working ´now properly. really strange.
Thanks Sebastii and Mm135200 for your time again!
All the best!
Alex
Hi. I found some kind of problem with my router. Firmware reset and all working ´now properly. really strange.
Thanks Sebastii and...
Dear Team,
Since yesterday, with no aparent reason, my iptv stoped working.
DVBT channels work, but IPTV doesent.
2 days a go...
Hello
The recordings are failing because your tuner is unavailable:
[2017-08-22 20:53:03,656] [Log ] [scheduler thread] [INFO ] - Scheduler: Time to record FOX HD (KD) 20:53-21:45 Nashville
[2017-08-22 20:53:03,657] [Log ] [scheduler thread] [INFO ] - Controller: find free card for channel FOX HD (KD)
[2017-08-22 20:53:03,658]...
Hello
The recordings are failing because your tuner is unavailable:
[2017-08-22 20:53:03,656] [Log ] [scheduler thread] [INFO ]...
Hi there,
I know there are some threads with "not working rrcordings" but none seem to help :(.
Can someone have a look into my...