Television (MyTV frontend and TV-Server) (15 Viewers)

Problems with the TV-Server or MyTV frontend? Post them in here.
Long time MP user here, stumped. Installed HDHomeRun Prime in Windows 10 box. HDHomeRun app and NPVR both work just fine. Followed the wiki and the thread to the letter, as far as I know. Cable service is all SDV, cable card and tuning resolver are required and installed and working. MP 1.18, just installed over equally incapable...
Long time MP user here, stumped. Installed HDHomeRun Prime in Windows 10 box. HDHomeRun app and NPVR both work just fine. Followed...
Long time MP user here, stumped. Installed HDHomeRun Prime in Windows 10 box. HDHomeRun app and NPVR both work just fine. Followed...
Replies
0
Views
2K
Same discontinuities with TVE3.5. Full logs attached, in case anyone is still reading ;-) Get a lots of "2018-03-10 14:25:49.114 recorder: PID 5119 unsignaled discontinuity, value = 0, previous = 9, expected = 10, count = 908, signal quality, descrambling, or HDD load problem?" This logs suggests Problems I think I ruled out...
Same discontinuities with TVE3.5. Full logs attached, in case anyone is still reading ;-) Get a lots of "2018-03-10 14:25:49.114...
Hi, since a few weeks I have a huge problem with discontiuties in the log which lead to failed recordings. Usually these...
Replies
15
Views
3K
Like TV3 code is in code freeze, you can continue to use V2 bin on newer MP TVServer version :P Still if you run into issues then we can supply a new bin based on latest MP version :P
Like TV3 code is in code freeze, you can continue to use V2 bin on newer MP TVServer version :P Still if you run into issues then...
Hi, TV channel ORF2O HD basically runs fine for many hours, but at about 07:21 pm there seems something happening. What might be...
Replies
61
Views
12K
Ok, found it by myself. Disabling IPv6 in network settings did the trick.
Ok, found it by myself. Disabling IPv6 in network settings did the trick.
Hey guys, having quite a few problems lately with my client setup. One of the problems currently is that tuning of a channel takes...
Replies
1
Views
745
Thanks, I will read up on that.
Thanks, I will read up on that.
My current setup: Mediaportal TV Server (v 1.18.1 on Win7 Pro) - wired network connection Kodi (v 17.6 on Ubuntu 16.04.3) - wired...
Replies
8
Views
2K
How are things going Jamie? Have you given up, or are you just busy?
How are things going Jamie? Have you given up, or are you just busy?
I have so many symptoms that I am wondering if I shouldn't just uninstall and wipe everything and start over. #4 below is the only...
Replies
11
Views
2K
I get a conflict every time a TV show claims that it stops one minute past the hour. That causes a conflict with the next hour since the one minute overage claims the entire next half hour or hour as if it was a continuing recording. Is there any way to edit the stop time so I just lose that one minute? ( like my old VCR let me do...
I get a conflict every time a TV show claims that it stops one minute past the hour. That causes a conflict with the next hour...
I get a conflict every time a TV show claims that it stops one minute past the hour. That causes a conflict with the next hour...
Replies
0
Views
644
Hey thanks so much for the quick reply. This totally solved my problem, and MP is also much more responsive now. Many Thanks I really appreciate it !
Hey thanks so much for the quick reply. This totally solved my problem, and MP is also much more responsive now. Many Thanks I...
Hi After upgrading to MP 1.18.0: - If I play a recorded TV program, I get sound OK - However if I stop, and then later resume...
Replies
2
Views
1K
MP1 MP2 mysqld.exe CPU load DE
Windows Services said TV Server had started but it must have been mistaken. I restored the original Program Files\MySQL and ProgramData\MySQL on the actual computer where it was installed, but it didn't work. Perhaps it was folder security issues, I don't know. I tried the same on a VM which is set to the exact same computer name...
Windows Services said TV Server had started but it must have been mistaken. I restored the original Program Files\MySQL and...
TV Server 1.18.0 Windows 7 32-bit 4GB RAM AMD Phenom I CPU 2.1Ghz triple core I'm just wondering if this is normal. Every 15...
Replies
19
Views
2K
Wow that was quick...! Checked your link to the problem, and see I did almost everything OK, but failed to change the Schema name. But I just removed everthing again but now also removed Mysql and the DD drivers, reinstalling should now solve the problem. Thanks for the super quick reply, much appreciated!
Wow that was quick...! Checked your link to the problem, and see I did almost everything OK, but failed to change the Schema...
When I try to start TV server setup, it seems it cannot find any free TV tuning cards, but there should be TWO available (Digital...
Replies
2
Views
810
MP1 MP2 Migration help. DE
What a speedy service! Again, thanks - that will save a good chunk of time!
What a speedy service! Again, thanks - that will save a good chunk of time!
Hi, I have decided to replace my existing HTPC with a brand new system. My plan was to migrate all the data first - all done...
Replies
4
Views
1K
Please attach full log files from both client and server. Use the provided Watchdog tool if possible.
Please attach full log files from both client and server. Use the provided Watchdog tool if possible.
Hi guys, I still have Problems with my client-pc to connect to my Server. I always get above Connection error to the database. My...
Replies
1
Views
1K
Enter 4 numeric digits representing "hhmm", where this is the offset in hours and minutes from the start of the recording. Example: if the recording is 60 minutes in length, enter "0030" to jump to 30 minutes from the start of the recording. -- from CyberSimian in the UK
Enter 4 numeric digits representing "hhmm", where this is the offset in hours and minutes from the start of the recording...
Hi, I don't see the navigation (timeline) for recorded TV programs. I can play, but there is no play head to move to different...
Replies
4
Views
1K
I hope someone can help with a problem that crops up occasionally, roughly every month or so. Please see the attached screenshot for the quickest description. As you will see recording is working fine (and it always does) - so why the apparent problem with the service/server name? In itself this is not a major problem, except that...
I hope someone can help with a problem that crops up occasionally, roughly every month or so. Please see the attached screenshot...
I hope someone can help with a problem that crops up occasionally, roughly every month or so. Please see the attached screenshot...
Replies
0
Views
511
Thanks, I'll wait and see what DD has to say.
Thanks, I'll wait and see what DD has to say.
After several years of abstinence, I have added some premium channels to my cable TV subscription and have plugged my CI/CAM module...
Replies
5
Views
2K
Hi. I found some kind of problem with my router. Firmware reset and all working ´now properly. really strange. Thanks Sebastii and Mm135200 for your time again! All the best! Alex
Hi. I found some kind of problem with my router. Firmware reset and all working ´now properly. really strange. Thanks Sebastii and...
Dear Team, Since yesterday, with no aparent reason, my iptv stoped working. DVBT channels work, but IPTV doesent. 2 days a go...
Replies
3
Views
1K
In the interest of trying to make the htpc quiet, I brought another fanless gpu this time a pcie3 card thinking that pcie2 may not have had the bandwidth required. Everything was fine for a while, I'm now gettting lockups when starting the television if the tv module is on just like the other fanless card, stopping tv and restarting...
In the interest of trying to make the htpc quiet, I brought another fanless gpu this time a pcie3 card thinking that pcie2 may not...
hi guys I really hope you can help me I'm about a my wits end with this. If I switch the television off overnight and then switch...
Replies
5
Views
1K
With making the changes recommended issue appears to be resolved.
With making the changes recommended issue appears to be resolved.
I am experiencing some issues with live TV. It will start off fine, but after some time (usually an hour or so, sometimes more...
Replies
5
Views
2K
MP1 MP2 TV not recording DE
Hello The recordings are failing because your tuner is unavailable: [2017-08-22 20:53:03,656] [Log ] [scheduler thread] [INFO ] - Scheduler: Time to record FOX HD (KD) 20:53-21:45 Nashville [2017-08-22 20:53:03,657] [Log ] [scheduler thread] [INFO ] - Controller: find free card for channel FOX HD (KD) [2017-08-22 20:53:03,658]...
Hello The recordings are failing because your tuner is unavailable: [2017-08-22 20:53:03,656] [Log ] [scheduler thread] [INFO ]...
Hi there, I know there are some threads with "not working rrcordings" but none seem to help :(. Can someone have a look into my...
Replies
1
Views
1K
@Owlsroost @mm1352000 Just wanted to clear this up finally. The Nvidia GTX 1050Ti is now installed in my Desktop PC, and if I play the problem recording there I still get a green screen etc. with the Hardware Decoder set to DXAV2 Copy-Back and Native, however with Lav 0.70.0 the Nvidia Cluvid decoder now supports HEVC and when I use...
@Owlsroost @mm1352000 Just wanted to clear this up finally. The Nvidia GTX 1050Ti is now installed in my Desktop PC, and if I play...
I have recently begun to experience green screens very intermittently when watching live DVBT2 HD (HEVC) TV and yesterday evening I...
Replies
11
Views
3K
MP1 MP2 not recording DE
Looks like I found a workaround and it looks like it may be related to that signal potentially being missing. If I try to record the current program it does not start, if I then edit that schedule (even if I change nothing) it then starts. I'll look towards the MP plugin for Kodi
Looks like I found a workaround and it looks like it may be related to that signal potentially being missing. If I try to record...
set a schedule, the time come up and nothing happens, no recording. other recordings have happened today. there were no tuners in...
Replies
16
Views
3K
Thx @regeszter and @mm1352000! I have deteted the entry out of the "pendingdeletion" table. The "remove invalid entries" feature did not do the trick.
Thx @regeszter and @mm1352000! I have deteted the entry out of the "pendingdeletion" table. The "remove invalid entries" feature...
Hello! While having a look into the TV server logs I have seen that the server is creating a lot of thumbs after it has been...
Replies
5
Views
639
Nah, no criticism here, just information about alternatives. Many thanks for your contributions! Some words about Logomanager have written here Channel Logo Setup - MediaPortal 1 - MediaPortal Wiki Looks like relevant place for it. I didn't look at localized section in wiki but I think you could update it if you like. @Jasmeet_181 as...
Nah, no criticism here, just information about alternatives. Many thanks for your contributions! Some words about Logomanager have...
The latest TV logos are available here. It is just the newest logos from the major networks. No revised logos from the religious...
Replies
3
Views
2K
What i worked out was that from within mediaportal, i had to clear invalid recordings from the recordings menu. Once this was done, i could yhen go back to the tv server config and import shows.
What i worked out was that from within mediaportal, i had to clear invalid recordings from the recordings menu. Once this was...
I have had to reinstall install windows and MP. I followed the manual back up & restore process including exporting tv server...
Replies
17
Views
2K
Thanks for the reply CyberSimian. After I posted I remembered about the DVB-T setting on the TV Server config, so ticked these and waited. Nothing seemed to happen, but Lo! and behold, this morning all the EPG gaps were filled. The GF watches Talking Pictures TV as she is a sucker for old B&W films, and now this is populated it will...
Thanks for the reply CyberSimian. After I posted I remembered about the DVB-T setting on the TV Server config, so ticked these and...
Hi Guys, For a long while now I have used the Sky Grabber MP variant which is great as it fills about 90% of the EPG and allows...
Replies
2
Views
1K
@joEhSuper Great that you have a solution... but I'd strongly suggest you still try to get RTSP working. It's not that RTSP is better. Rather, if the source of the problem is security software config, it may cause other side effects like corrupted recordings. Therefore in my opinion it's important to really solve the problem, not...
@joEhSuper Great that you have a solution... but I'd strongly suggest you still try to get RTSP working. It's not that RTSP is...
I am very confused :confused::confused::confused: When I try to playback recorded TV --> I only get bricks and squeakings When I...
Replies
8
Views
1K
:) These things happen. No need to be embarrassed - it's an easy mistake to make. I'm just happy to have been able to help. See you around! :)
:) These things happen. No need to be embarrassed - it's an easy mistake to make. I'm just happy to have been able to help. See you...
Hi, I wonder how often tuning details of the satellites are being updated. At least for Astra 19.2E, with the currently importable...
Replies
8
Views
1K
Got it :D TV-Server Configuration--> Export xml file contains all the informations ;)
Got it :D TV-Server Configuration--> Export xml file contains all the informations ;)
I have a pproblem when updating my IPTV - Channels. The Channel Names (not all??) are not being updated when there is the same...
Replies
3
Views
2K
Okay. I can't see any reason for the problem within MP. Therefore I suspect an external cause. Did you try rebooting the PC? Have you tried other software?
Okay. I can't see any reason for the problem within MP. Therefore I suspect an external cause. Did you try rebooting the PC? Have...
Hi Tv server suddenly stopped getting any signal on the tuners, i have tried the signal on an set top box, the sattelite and LNB...
Replies
6
Views
919
@mm1352000 A few months later, I tried several things. I disable any virusscanning in the registry now, and I'm confident that nothing scan the system. However, the tuning and channel changing stays slow when I have the default logging (3) enabled for the IPTV part (MPIPTVSource.ini) when I put it to 0, it is fast again. Is there...
@mm1352000 A few months later, I tried several things. I disable any virusscanning in the registry now, and I'm confident that...
Finally, after testing on my laptop via Wifi I was able to give Kodi a kick on our Intel NUC and activate Mediaportal. Strange...
Replies
19
Views
3K
Top Bottom