General Support (934 Viewers)

Post problems you have when using MediaPortal, or pre installation questions in here.
Not sure if anyone else has this problem, it seemed to start with 1.5. if I turn the TV (HDMI) off then back on before standby then everything is ok, tv screen comes back on. If media portal wakes up without TV turned on then when I turn on TV the screen is blank, I have to press the power button to get the display on, neither the...
Not sure if anyone else has this problem, it seemed to start with 1.5. if I turn the TV (HDMI) off then back on before standby then...
Not sure if anyone else has this problem, it seemed to start with 1.5. if I turn the TV (HDMI) off then back on before standby then...
Replies
0
Views
830
This is still an issue. I see other posts similar to this. Any ideas?
This is still an issue. I see other posts similar to this. Any ideas?
What is interesting, old folders that have folder.jpg file in it are showing correctly, but now when IMDB is not saving cover...
Replies
1
Views
1K
Hi, just follow these steps. https://forum.team-mediaportal.com/threads/mediaportal-1-6-0-pre-release-ready-for-download.122865/page-2#post-1041540
Hi, just follow these steps...
Hi, i want to update from MP1.5 to MP1.6............ In the release notes it says it will only install the new SQL 5.6 engine...
Replies
1
Views
1K
Thanks for the reply. I found it out yesterday by deactivating different plug-ins and reactivating one by one. ;) Just forgot to write it down here.
Thanks for the reply. I found it out yesterday by deactivating different plug-ins and reactivating one by one. ;) Just forgot to...
My Mediaportal client keeps randomly crashing after I resume from standby. I'm currently running win8.1 & mp 1.6pre but I had this...
Replies
6
Views
3K
recommended budget tv card? maximum : $30 .. mainly used for composite input (or equivalent) playback and recording
recommended budget tv card? maximum : $30 .. mainly used for composite input (or equivalent) playback and recording
recommended budget tv card? maximum : $30 .. mainly used for composite input (or equivalent) playback and recording
Replies
0
Views
817
Can't believe it took 32 minutes from me posting to a fix been available! Shocking response times! Come on guys speed up! (y)
Can't believe it took 32 minutes from me posting to a fix been available! Shocking response times! Come on guys speed up! (y)
Basically with no plugins and skin MP goes to sleep and wakes up perfectly. However with a skin on (MPStreamed & Titan Cherry) MP...
Replies
6
Views
1K
I though everything was going well until I got an SQlite Unhandled error everything I try to play a video. I though it was because the TV-Series plugin, but got rid of that plugin and used videos instead, but still getting the errors. I tried deleting the TV database but got the error again. :-( Help please...I'm just holding on by...
I though everything was going well until I got an SQlite Unhandled error everything I try to play a video. I though it was because...
I though everything was going well until I got an SQlite Unhandled error everything I try to play a video. I though it was because...
Replies
0
Views
1K
I have scraped the movies in folders with XBMC. Can I scrape the same movies in the same folders with MediaPortal without losing the information XBMC provided? So, when I open XBMC, I can see the movie information XBMC provides and when I open MediaPortal I can see the information MM has downloaded?
I have scraped the movies in folders with XBMC. Can I scrape the same movies in the same folders with MediaPortal without losing...
I have scraped the movies in folders with XBMC. Can I scrape the same movies in the same folders with MediaPortal without losing...
Replies
0
Views
949
Thank you for following up. Always good to hear about the solution to a problem. (y)
Thank you for following up. Always good to hear about the solution to a problem. (y)
Hi I've been having frequent MP crashes since going to 1.4/1.5, it's hard to pin down what triggers it, but it does seem to be...
Replies
5
Views
1K
Hm... you mean to Zoom the Video automatically. Think ViewMode Switcher or IFC is what your are looking for!
Hm... you mean to Zoom the Video automatically. Think ViewMode Switcher or IFC is what your are looking for!
How to minimize black bar? Xbmc very good function minimize black bar. Im like Mediaportal. Im need black bar minimize.
Replies
1
Views
1K
Hello and happy new year erichzann :) Nope, I don't mind. :) Yeah, they're good folks. :) Mmmm. :( I've had a look, but I'm sorry to say that nothing really stands out. There are continuity errors in your TsWriter log... which is odd. Maybe suggests the input signal quality is not good. You've connected the power connector to the...
Hello and happy new year erichzann :) Nope, I don't mind. :) Yeah, they're good folks. :) Mmmm. :( I've had a look, but I'm...
Hi All, I was noticing problems with the EPG data and channels not tunning so I went into the TV Server (1.4). I downloaded the...
Replies
12
Views
3K
I do have the samre problem, after I have just updated from MP 1.5.0 to MP 1.6.0, but MP is NOT muted in those audio settings. But there is no audio when using MP, neither for live TV, nor for recorded videos. All system souns and WMP videos do work with sound. I installed MP with all the general settings. Any help would be much...
I do have the samre problem, after I have just updated from MP 1.5.0 to MP 1.6.0, but MP is NOT muted in those audio settings. But...
I got some strange problem, no sound at all from Mediaportal. If I play a movie direct from wmp it works fine and the same with...
Replies
4
Views
3K
unfortunately i have deleted all recordings and i have switch tv card with the connexant one... will post a recording if i try the mercury card again(it's a pain to switch the cards on my mini atx case tbh lol)
unfortunately i have deleted all recordings and i have switch tv card with the connexant one... will post a recording if i try the...
I have an old analog tv card and I am using composite in. Video works fine with tv server but i can't get sound to work.. the audio...
Replies
13
Views
3K
Hello hinuslinus First, the channel number field that you're referring to was added in MP 1.3. From then on, if you didn't have "show channel numbers..." enabled, any numbers you were seeing in MP were indexes. In other words, as far as I'm concerned "show channel numbers..." was always required and this is no bug. This could be an...
Hello hinuslinus First, the channel number field that you're referring to was added in MP 1.3. From then on, if you didn't have...
I noticed two changes in the behavior of the "Channel number" functionality from MediaPortal v1.5 to v1.6. Were these two changes...
Replies
1
Views
1K
I had the exact same problem, my high-res flac files wouldn't play. Changing the buffer from 2 down to 0.67 like you suggested worked!! (y)
I had the exact same problem, my high-res flac files wouldn't play. Changing the buffer from 2 down to 0.67 like you suggested...
After updating to the latest MP version I am not able to play my vinyl rips anymore, i.e 24/96 and 24/192 flac files. I am using...
Replies
5
Views
1K
My mistake,that setting only appears on world weather lite;)
My mistake,that setting only appears on world weather lite;)
Hi everyone, After wakeup from standby, there is a long delay (sometimes up to two minutes) until mediaportal starts working again...
Replies
23
Views
7K
MP1 MP2 1.6 freezes after being in sleep mode (3 Viewers) DE
I upgraded from 1.5 to 1.6 yesterday and now when I come out of sleep mode MP freezes and I have to end the task in Task Manager. Thank you, schumach UPDATE: This issue is related to World Weather Lite (running version 1.2). A delay of 7 seconds needs to be added within World Weather Lite troubleshooting tab. Without the delay...
I upgraded from 1.5 to 1.6 yesterday and now when I come out of sleep mode MP freezes and I have to end the task in Task Manager...
I upgraded from 1.5 to 1.6 yesterday and now when I come out of sleep mode MP freezes and I have to end the task in Task Manager...
Replies
0
Views
983
Personal choice. :) As far as TV Server is concerned: safe.
Personal choice. :) As far as TV Server is concerned: safe.
Hey all, I have a really strange issue with MP 1.5.0 Single Seat Install with MySQL with 1 x TBS 6985 S2 Quad Tuner and also 1 x...
Replies
17
Views
3K
Just upgrade to 1.6 final from 1.6 pre-release and removable drives are showing in music (using titan extend 2 skin). Switch to removal drive and optical drive are unchecked in music setup, I only want my album folder to display when I select music in mediaportal. This was not happening in the pre-release.
Just upgrade to 1.6 final from 1.6 pre-release and removable drives are showing in music (using titan extend 2 skin). Switch to...
Just upgrade to 1.6 final from 1.6 pre-release and removable drives are showing in music (using titan extend 2 skin). Switch to...
Replies
0
Views
1K
JIRA Issue added: https://issues.team-mediaportal.com/browse/MP1-4337
JIRA Issue added: https://issues.team-mediaportal.com/browse/MP1-4337
It closes to the tray alright, but the MP taskbar icon is still visible for some reason. And when I need to restore it again with...
Replies
4
Views
2K
MP1 MP2 HDMI display issues DE
the last one is october. maybe, but seems not related to HDMI issue. ( but why not )
the last one is october. maybe, but seems not related to HDMI issue. ( but why not )
Hi, So I had previous posted this issue in the watch tv sub forum as I was only experiencing the issues when using TV, mm1352000...
Replies
9
Views
2K
I just ran into this when installing MediaPortal v1.6.0 with a clean installation to get MySQL v5.6. Even after uninstalling MediaPortal (including the TV server), uninstalling MySQL, removing the C:\ProgramData\MySQL and C:\Program Files\MySQL folders, and rebooting several times, the problem still persisted upon install. I...
I just ran into this when installing MediaPortal v1.6.0 with a clean installation to get MySQL v5.6. Even after uninstalling...
I'm have real problems installing and starting MYSQL 5.1. I've reinstalled it fresh but it wont start. I've tried to configure it...
Replies
1
Views
3K
Is the BluRay copy-protected/encrypted or not? If yes, do you use one of the recommended (and needed) 3rd party software to bypass this?
Is the BluRay copy-protected/encrypted or not? If yes, do you use one of the recommended (and needed) 3rd party software to bypass...
Installed MP 1.5 and trying to get the BluRay play working, but without success. In short, the disc is recognised in MP but...
Replies
2
Views
1K
Hmmmm I wasn't but I installed it to check it wasn't a problem with the lav filters. The crashing happened before and after i installed it. I'm getting more random crashes with other programs. I've done a memory test and they check out ok. Could it be my ssd? It is a few years old.Ok so I've just gone back to it and it's just...
Hmmmm I wasn't but I installed it to check it wasn't a problem with the lav filters. The crashing happened before and after i...
Hi I have for the first time since I started using mediaportal some 5 or maybe 6 years ago or is it longer than that? Encountered...
Replies
5
Views
1K
Below is the attached nfo for one movie. I do not want to upgrade to 1.6.0 yet because some plugins i have for tv server wont work anymore so i'll have to wait a few days. <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <movie> <fileinfo> <streamdetails> <video> <width>1280</width>...
Below is the attached nfo for one movie. I do not want to upgrade to 1.6.0 yet because some plugins i have for tv server wont work...
Hi , i just started using mediaportal after a switch from XBMC, i have organised movie folders each with fanart posters and nfo...
Replies
13
Views
3K
I have the Epson 5010 ... plug 'n play, 3D out of the box! Absolutely stunning.
I have the Epson 5010 ... plug 'n play, 3D out of the box! Absolutely stunning.
I'm looking for a projector that works out of the box for 3D in MediaPortal, without playing with firmwares, software or refresh...
Replies
5
Views
1K
any cheaper alternative card? i have an old tv analog card with composite in.. it works with only video... the audio is connected to the line in jack of my pc and i have chosen line input in the tv server configuration but sitll no audio.
any cheaper alternative card? i have an old tv analog card with composite in.. it works with only video... the audio is connected...
So I have a CCTV dvr in my server rack (right above my server that has tv-server on it). It has an composite (yellow on RCA) out...
Replies
2
Views
1K
MP1 MP2 Unable to play Audio CD (2 Viewers) DE
I have tried it here, and it's working for me just fine using MP 1.6.0. Are you shure that Windows is recognising the disk itself? If you enable autoplay in windows, is Windows MediPlayer starting and playing the disk if you insert the CD? Otherwise, it's not a MP problem..
I have tried it here, and it's working for me just fine using MP 1.6.0. Are you shure that Windows is recognising the disk...
Hello Looking for a bit of advice/help. I have mediaportal 1.5 installed and it will not recognise when i have put in an audio...
Replies
1
Views
844
MP1 MP2 RTSP vs UNC DE
Hi, I/We have try UNC setting and somehow RTSP is in use for LiveTV (streaming server.Log) is filled, i'm pretty sure it was not the case on previous MP version (don't remember when). @mm1352000 does something change on that side ? :) Edit : In fact UNC is used but also the RTSP server is started (but not used). That MP MP Client...
Hi, I/We have try UNC setting and somehow RTSP is in use for LiveTV (streaming server.Log) is filled, i'm pretty sure it was not...
Hi there, I have been having a stroll through the threads on here and have come accross some discussion on either using RTSP or...
Replies
9
Views
4K
MP1 MP2 MP doesn't start anymore (1 Viewer) DE
DB Repaired: Plugins db moved to another folder. How can I re-import them? MP now starts, but I can only see white words on black screen and nothing works. New logs attached. Thanks!
DB Repaired: Plugins db moved to another folder. How can I re-import them? MP now starts, but I can only see white words on black...
Nothing new installed, no driver changed, no updates, nothing... [2013-12-23 16:52:58,291] [Error ] [MPMain ] [ERROR] -...
Replies
12
Views
2K
Top Bottom