Television (MyTV frontend and TV-Server) (468 Viewers)

Problems with the TV-Server or MyTV frontend? Post them in here.
MP1 MP2 Crash in my videos DE
Thanks gemx, That solved it! Chris
Thanks gemx, That solved it! Chris
TV-Server Version: Rev 18436 MediaPortal Version: Rev 18436 MediaPortal Skin: BlueTwo Windows Version: XP Pro CPU Type: AMD XP...
Replies
2
Views
962
i've also reinstalled mp + server (newest svn) and i still have got the problem. i manually de- and registered tsreader but it did not change anything. I've XP Sp3 RC on my pc (client), could that be a part of the problem ? I'll try to install mp on my server today to see if it is working on it. MPTvClient works fine, as long...
i've also reinstalled mp + server (newest svn) and i still have got the problem. i manually de- and registered tsreader but it...
TV-Server Version: Rev18463 (SVN 04-01-2008) MediaPortal Version: Rev18463 (SVN 04-01-2008) MediaPortal Skin: Monochrome 1.7.744...
Replies
6
Views
2K
I can confirm I experienced much the same with TVE3 18436. It was caused by updating the drivers for my Win-TV HVR-4000s. I guess maybe TV Server saw them as new cards. It allowed me to launch the configuration program once but said it could not connect to the server (even though it is a single seat installation). Rebooting did not...
I can confirm I experienced much the same with TVE3 18436. It was caused by updating the drivers for my Win-TV HVR-4000s. I...
MediaPortal Version: TVengine3-02-11-2007--01-13--Rev12919 MediaPortal Skin: N/A Windows Version: XP Pro SP2 CPU Type: PentiumD...
Replies
14
Views
4K
Hello, that's weird. The problems, which i've mentioned above, depend on sat-channel, which is current being viewed. I've seen, that channels with resolution 720x576 will be recorded & viewed without any problems. Another sat channel resolutions cause problems with my sat card. With some channels it looks like, that only very first...
Hello, that's weird. The problems, which i've mentioned above, depend on sat-channel, which is current being viewed. I've seen...
Hello, i have an old DBB-S card, which works fine with MediaPortal. It means i can see TV, record channels and so on. The...
Replies
2
Views
1K
MP1 MP2 "No Signal" DE
Hybrid card? You have a hybrid card. There is a special trick when configuring them in TVServer Management Console. This is documented somewhere in the Wiki. Once done, it may work better. Good luck :-)
Hybrid card? You have a hybrid card. There is a special trick when configuring them in TVServer Management Console. This is...
I install mediaportal I with last SVN and TvServer. ANd when I search channels, and "no signal". I have an old install on same PC...
Replies
1
Views
1K
Something like this instead of latching to an old thread (more than 3 months) you are better off just creating a new one, after a search of course :) could be something recent that may affect a few people and may just have the answer already there.
Something like this instead of latching to an old thread (more than 3 months) you are better off just creating a new one, after a...
MediaPortal Version: not installed yet MediaPortal Skin: not installed yet Windows Version: XP Pro sp2 - fresh install yesterday...
Replies
8
Views
2K
TV-Server Version: TV3 MediaPortal Version: 2.0.3.0 MediaPortal Skin: Default Windows Version: Vista CPU Type: INtel 2160 1.8 DualCore HDD: Seagate sata 160 Memory: 2Gig 667 DDR Motherboard: XFX SLI Motherboard Chipset: Motherboard Bios: Award Video Card: Nvidia 7600 256 Video Card Driver: Default Sound Card: ON board...
TV-Server Version: TV3 MediaPortal Version: 2.0.3.0 MediaPortal Skin: Default Windows Version: Vista CPU Type: INtel 2160 1.8...
TV-Server Version: TV3 MediaPortal Version: 2.0.3.0 MediaPortal Skin: Default Windows Version: Vista CPU Type: INtel 2160 1.8...
Replies
0
Views
1K
MP1 MP2 No TV on client PC DE
GREAT !! that fixed the problem for me !!! Thanks a lot.
GREAT !! that fixed the problem for me !!! Thanks a lot.
TV-Server Version: tvengine3-03-17-2008--11-10h--Rev18032 MediaPortal Version: MP 0.2.3.0...
Replies
8
Views
3K
Revision 18436 is a good start. DMAN
Revision 18436 is a good start. DMAN
Hi since a few SVNs, i think so about 2 - 3 weeks i cant use my KNC1 card :( I have tested today with 2 FireDTV and one KNC1...
Replies
4
Views
993
I tried using the patch found in here, which gave me a picture for a few seconds but then MediaPortal crashed and on the server TVServer suddenly started chomping on memory and then after consuming all it could, died. At least I know the two are talking to each other. Patch Post Link...
I tried using the patch found in here, which gave me a picture for a few seconds but then MediaPortal crashed and on the server...
TV-Server Version: Build 18080 MediaPortal Version: 0.2.3 + SVN 18080 MediaPortal Skin: Windows Version: XP SP2 CPU Type: AMD...
Replies
7
Views
2K
hm...now IPTV@UT Plugin is not working either :( MEDIAPORTAL - free MediaCenter HTPC Software - IPTV@UT Plugin with this plugin I managed to get to work stream from vlc....
hm...now IPTV@UT Plugin is not working either :( MEDIAPORTAL - free MediaCenter HTPC Software - IPTV@UT Plugin with this plugin I...
TV-Server Version: tvengine3-03-29-2008--05-08h--Rev18359.zip MediaPortal Version: none MediaPortal Skin: none Windows Version...
Replies
2
Views
2K
That worked Thanks
That worked Thanks
TV-Server Version: MediaPortal Version: 02.3.0 SVN 18032 MediaPortal Skin: Standard Windows Version: XP Mediacenter CPU Type...
Replies
2
Views
1K
Today's seems fine. One thing it pointed out during install though, was no microsoft Visual Studio2005 installed, it was, but it was the older version installed by MP0.2.3.0 and needed to be updated to the new version (follow link in installer). Not sure how much this effects things, but works fine here now. Also have a look...
Today's seems fine. One thing it pointed out during install though, was no microsoft Visual Studio2005 installed, it was, but it...
TV-Server Version: tvengine3-03-29-2008--05-08h--Rev18359 MediaPortal Version: MediaPortal-svn--03-29-2008--05-04-Rev18359...
Replies
3
Views
1K
MP1 MP2 Media Portal locks up (1 Viewer) DE
Uninstalling and reinstalling worked. I don't know what I did to screw it up, but as I mentioned before, I totally nuked MediaPortal from my pc, and then reinstalled it. It was good practive, anyway. Thanks for everyone's help.
Uninstalling and reinstalling worked. I don't know what I did to screw it up, but as I mentioned before, I totally nuked...
I am using the current release of media portal with no nightlies applied running the SpinSafe Revolve skin on Windows Media Center...
Replies
11
Views
3K
MP1 MP2 Not connected to database (1 Viewer) DE
Make sure the firewall on your server does allow incoming connections. Ping (ICMP) isn't relevant here. A "telnet UNDERETAGE 3306" from your client must be successful as well. If your connection is setup correct your MP should be fine as well.
Make sure the firewall on your server does allow incoming connections. Ping (ICMP) isn't relevant here. A "telnet UNDERETAGE...
TV-Server Version:TVEngine3 revision 18234 MediaPortal Version: v0.2.3.0 , svn revision 18234 MediaPortal Skin: Bue two Windows...
Replies
4
Views
1K
First part fixed, thanks a lot I have made a new post with my new problem :thx:
First part fixed, thanks a lot I have made a new post with my new problem :thx:
TV-Server Version:TVEngine3 revision 18207 MediaPortal Version: v0.2.3.0 , svn revision 18215 MediaPortal Skin: Windows...
Replies
5
Views
2K
ok, it's fixed. we cannot start tvservice directly. Need to start tvsetup which start tvservice.
ok, it's fixed. we cannot start tvservice directly. Need to start tvsetup which start tvservice.
i've set up the tv server and the tv plugin. everything works fine as long as i keep the SetupTv.exe opened (first it asks me if i...
Replies
2
Views
2K
thats great then. however, i dont want to change my tv server setup right now that its working. but probably will try new release soon. so in the new tv server there is an option within mediaportal to delete individual recordings,right? and fix not existant recording files? great work as always then !!! ;) thanks
thats great then. however, i dont want to change my tv server setup right now that its working. but probably will try new...
TV-Server Version: Build 18080 MediaPortal Version: 0.2.3 + SVN 18080 MediaPortal Skin: Windows Version: XP SP2 CPU Type: AMD...
Replies
2
Views
1K
TV-Server Version: SVN Rev 18313 MediaPortal Version: SVN Rev 18313 MediaPortal Skin: Monochrome MCE Windows Version: Windows XP Pro SP2 CPU Type: AMD Athlon 3500+ HDD: Seagate 1TB Memory: 1GB DDR 400 Motherboard: Gigabyte GA-K8NSC-939 Motherboard Chipset: nVidia nForce3 Motherboard Bios: Video Card: ATI Radeon 9600 Video...
TV-Server Version: SVN Rev 18313 MediaPortal Version: SVN Rev 18313 MediaPortal Skin: Monochrome MCE Windows Version: Windows XP...
TV-Server Version: SVN Rev 18313 MediaPortal Version: SVN Rev 18313 MediaPortal Skin: Monochrome MCE Windows Version: Windows XP...
Replies
0
Views
1K
Hi milagroso, it did not work for me:( I installed the new drivers several time ago with no change. Today I did the steps you suggested and still have the problem that TVServer needs to be restarted several times until it comes up in an operational mode. I can tune all low band channels on my hauppauge and all channels on my...
Hi milagroso, it did not work for me:( I installed the new drivers several time ago with no change. Today I did the steps you...
Hello all, I just want to figure out whether I'm the only one having a blocking problem. I posted this earlier, but until now...
Replies
22
Views
5K
i also get a unknown error on previewing, Tvserver never starts writing .ts files and chrashes after a minute or so. When i do a channel-scan i have signal=0 and quality=100, in older versions i can watch tv even if i have "no" signal... My tv-card is a Terratec Cinergy dvb-s.
i also get a unknown error on previewing, Tvserver never starts writing .ts files and chrashes after a minute or so. When i do a...
Hi All I have several times tried to get TV Server up and running but with no luck. With the current version i get Unknown...
Replies
9
Views
1K
Your welcome. For me it was also difficult to find. I am glad that I could help you and maybe others :)
Your welcome. For me it was also difficult to find. I am glad that I could help you and maybe others :)
Hello alltogether and a good evening, I'm new to MediaPortal. Despite all warnings, I intend to run TV-Server in a WHS...
Replies
21
Views
8K
TV-Server Version: 18331 MediaPortal Version: 0.2.3.0 Final with SVN 18331 MediaPortal Skin: Blue Two Wide Windows Version: Windows XP Pro SP2 CPU Type: Athlon X2 +4200 HDD: 3 160GB Seatages - 1 750GB Seagate Memory: 2 GB DDR400 Ram Motherboard: Foxconn 6150BK8MC-KRSHN2 Motherboard Chipset: nForce 430 MCP Motherboard Bios...
TV-Server Version: 18331 MediaPortal Version: 0.2.3.0 Final with SVN 18331 MediaPortal Skin: Blue Two Wide Windows Version...
TV-Server Version: 18331 MediaPortal Version: 0.2.3.0 Final with SVN 18331 MediaPortal Skin: Blue Two Wide Windows Version...
Replies
0
Views
1K
I installed the latest svn nightly build and now everything seems to work for me! Super!
I installed the latest svn nightly build and now everything seems to work for me! Super!
Hi there, i've just taken the leap from my tv to tv server and i seem to have my share of problems adjusting. (single seat) I...
Replies
34
Views
6K
MP1 MP2 MP Crash Help DE
I should clarify that I replaced the old memory with a new and different 1 gig stick.
I should clarify that I replaced the old memory with a new and different 1 gig stick.
MediaPortal Version: 0.2.3.0 MediaPortal Skin: Monochrome Windows Version: XP SP2 CPU Type: Intel Celeron 2.40 GHz HDD: Seagate...
Replies
3
Views
1K
Sorted - same problem as -> https://forum.team-mediaportal.com/get-support-90/no-tv-client-pc-36803/
Sorted - same problem as -> https://forum.team-mediaportal.com/get-support-90/no-tv-client-pc-36803/
Hi I just upgraded from MP SVN 17355 & matching TVS3 to 18032 and now TV will not work on MP clients but without any obvious error...
Replies
1
Views
2K
Dscaler Audio solved all my audio problems with channels! Great stuff.
Dscaler Audio solved all my audio problems with channels! Great stuff.
TV-Server Version: SVN 17930 MediaPortal Version: 0.2.3.0 + SVN 17930 MediaPortal Skin: Spinsafe Revolve Windows Version: Vista...
Replies
12
Views
3K
It solved my problems :thx: :thx: :thx:
It solved my problems :thx: :thx: :thx:
Hello Guys, since the new installer is out. I always get the following error: System.DllNotFoundException: Unable to load DLL...
Replies
3
Views
2K
I have this strange issue with the TV Server Service where I am watching a DVB-T stream and then all of a sudden the picture freezes and a couple of minutes later says lost connection to the TV Server. I need to restart the TV Service to get things working again as it has stopped. This happens maybe once a day. Today it happened...
I have this strange issue with the TV Server Service where I am watching a DVB-T stream and then all of a sudden the picture...
I have this strange issue with the TV Server Service where I am watching a DVB-T stream and then all of a sudden the picture...
Replies
0
Views
1K
And now I fixed it. See the other thread.
And now I fixed it. See the other thread.
I tried to find the forum etc how to connect multiple servers together but no result... the pdf on wiki how to is not usefull. I...
Replies
3
Views
1K
Top Bottom